Equipment For Sale

SIHI LPHR 75340 041 0B 0 100 HP 2-Stage Liquid Ring Vacuum Pump, Originally Installed, but Never Used in Production!Specifications: -- Pump can handle and exhaust dry & humid gases. Entrained liquid can be handled during normal duty. Pump can be used across industries such as chemistry and pharmaceutical industry for distilling & degassing, electric industry for impregnation & drying, plastics industry for degassing, etc.Equipped with: -- 100 HP - 1,190 TEFC Motor. -- Double gland packing sealed shaft.Pump Dimensions with Added Piping: 108" x 42" x 47" H.

SIHI LPHR 75340 041 0B 0 100 HP 2-Stage Liquid Ring Vacuum Pump, Originally Installed, but Never Used in Production!Specifications: -- Pump can handle and exhaust dry & humid gases. Entrained liquid can be handled during normal duty. Pump can be used across industries such as chemistry & pharmaceutical industry for distilling & degassing, electric industry for impregnation & drying, plastics industry for degassing, etc.Equipped with: -- 100 HP - 1,190 TEFC Motor. -- Double gland packing sealed shaft.Pump Dimensions with Added Piping: 108" x 42" x 62" H.

SII Heat Treater 600 Pallet Capacity Mfg year is 2003 Model- PT600 Capacity- (1) 53’ truckload Material- Aluminum, Stainless Steel, Foam inside Insulation Values- unknown Processing time- Depending on Board Feet & Starting Temp, about 4 hours Burner- Qty 4 Fan- Number of Fans- 4 or 5 (wasn’t completely sure) Control System- PLC Programmable Logic Controller Power Requirements- 3 phase, 240v, and he thinks a 60amp breaker Dimensions- 55’L x 15’ W including control room BTUh- 400,000 per burner

Bank of (24) fans only. Building not included.

(9) Sets of Six Dry Kiln Controls

48” x 48” capacity | Lightly Used

SILVER SJK-21 Horizontal & Vertical Boring on 32 mm centers.(21) Spindles in line on one boring head (aluminum alloy single block), drills vertically from top & horizontally from rear. -- Features pneumatic adjustment for horizontal boring.Specifications: -- Max drill dia. is 1.38" (35 mm); Max panel thickness is 2.36" (60 mm); Table size 36" x 19.75" (914 x 502 mm). -- Length of cross fence is 102" (2,600 mm); length of aluminum table fences are 39" (1,000 mm) to the left and 28" (710 mm) to the right with flip stops.Equipped with: -- Depth stop adjustment, (2) holddown air cylinders, and foot pedal operation for clamping/drilling cycle. -- 2 HP - 3,600 RPM TEFC motor with thermal overload protection and low voltage controls.. -- Includes (12) Quick change chucks..

SILVER SJK-19T Line Boring MachineSingle line vertical boring machine with (19) spindles at 32 mm centers driven through a powerful 1.5 HP motor.Equipped with: -- Foot pedal controlled pneumatic boring cycle -- Adjustable boring feed speed -- Adjustable boring depth for fast changeover -- 2 Pneumatic cylinder clamp for solid hold-down to the material. -- 3 Meter long back fence for long line boring with flip stops -- (2) Positioning pins at both end of boring head to set up for longer line boring quickly -- Quick change chuck for fast changeover (19 pcs included)Specifications: -- No. of Spindles....................................................................................... 19 -- Distance between each spindle.............................................................. 32 mm -- Max Boring Depth .................................................................................. 60 mm (2.36") -- Working Table Size................................................................................ 800 x 500 mm (31.5" X 19.68") -- Table Height from Floor......................................................................... 780 mm (30.35") -- Max Boring Depth from Edge................................................................. 155 mm (6") -- Electric .................................................................................................. 220 V / 60 Cy / 3-Ph -- Machine Size (LxWxH) ........................................................................... 920 X 670 X 1490 mm (36.25" x 26.37" X 58.66") -- Net Weight ............................................................................................ 220 kgs. (484 Lbs)

4 Vertical Boring Head 21-Spindle from bottom on 32 mm centers, 1 Horizontal Boring Head 21 spindles on 32 mm cwnter -- 3" (75 mm) Max. drilling depth, (3) 4.0 HP - 3,450 RPM motor, pneumatic-hydraulic drill head advance with speed control with working speed or 0 - 15 cycles per min.; head height adjustment with mechanical digital readout; 51" x 37" working capacity. -- Equipped with: (2) pneumatic holddown clamps, pneumatic foot pedal control.

Model SF-45A 600 V / 3 Ph / 60 Hz 10ft table 8.5 HP main motor provides(2) cutting speeds 3,800 & 5,200 RPM

Silver Straight Line Rip Saw 15 HP Motor

SILVER 6023AH Moulder Feed Through 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6". Head sequence: -- Bottom 10 HP, top 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- All spindles with mechanical digital readouts. -- Feed: Variable speed of 18 - 82 FPM, with 5 HP feed drive motor. Powered feed rollers top and bottom. -- Infeed: Straightening table 2 M (6'6"), with side pressure roller and table lubrication pump. Includes:: -- Centralized control panel, -- Sound and safety enclosure.

New Simatech Flail Mulcher is made specifically for small excavators! With this attachment you can use your 1.5- 5 ton excavator to clear small debris and grass from around ponds, embankments, and more. Give us a call today for more information on this unit.

New Simatech 5- 10 Ton Flail mulcher! This small attachment is setup and ready to turn your excavator into a mowing machine. With the flail type teeth on this attachment it is capable of doing up to 4"" material around ponds, embankments and more. Give us a call to see how we can make this attachment work for you!

New Simatech Flail type mulcher for small track loaders. This attachment is made to on a low flow system and is capable of mowing down material up to 4"" in diameter! Give us a call to see how this machine can help make the difference on your job.

6 Ft. x 20 Ft., Single-Deck Vibrating Screen;Complete with the following features: --Counterweight type Drive with TEFC Motor. -- Food grade construction throughout. -- Accessible hinged Feed Box. -- Dust Cover. -- Double-crowned Screen Ball Deck with (6) Wire Screens. -- Total screening area of 6’x20’. -- Fines Collection Hopper with Discharge Spout. -- Factory Frame. NOTE: &#9679 This is a single-cut screen for two outputs. &#9679 Never Used.

SIMI 5' x 10' HOT PRESS Platen dimension 123" x 63" (3,125 mm x 1,600 mm). -- Max. daylight opening 17" (430 mm). -- (8) Hydraulic upstroke cylinders with diam. 6" (150 mm). -- Electrically heated platens with a maximum heating temperature of 240 F (120° C) -- Loading on all (4) sides of press.Overall dimensions: Length 165" x 81" x 117-1/4"

Simonds Band saw leveler. Comes with pallet of spare parts.

8' Simonds knife grinder in good condition. Bottom tray included

Good Condition Used Regularly