Equipment For Sale

Stehle 5802 Profile Grinder

STEINEMANN OSUS NOVA 160/6 K-FS/NS-OPTIMAT Top and Bottom Calibrating Sander(6) heads consisting in 2 machines, first machine top/bottom opposed head. Secoind machine (4) head with Combi and finishing platenFeatured: -- 2-Head K, (1) top & (1) bottom; both heads directly opposed. for calibrating -- (4) head FS/NS top/bottom first Combi head, second finishing platenSpecifications:First machine Calibrating Sander: -- Top/bottom opposed single head -- Working width 1,600 mm (63") both heads 11" dia. steel contact roll -- Thickness capacity 3 - 150 mm ( 1/8" - 5.9") -- Working height (passline) 1400 mm (55") -- Cutting speed on K head 34 M/sec. (6,667 SFM) -- Tolerance within the board +/- 0,075 mm (+/- 0,003") -- 100 HP motor each head. -- 63" x 103" Abrasive belt size. (to be confirmed) -- Air jet abrasive belt tracking. -- Variable feed speed 7 - 43 M/min. (24' -138"/min.), 20 HP feed motor,. -- Control panel for this machine only Second Machine Finishing Sander: -- Top/bottom (2) head each as Combination drum/platen and finishing platen -- Working width 1,600 mm (63") both heads 11" dia. steel contact roll -- Thickness capacity 3 - 150 mm ( 1/8" - 5.9") -- Working height (passline) 1400 mm (55") -- Cutting speed on FS head 22 M/sec. (4,330 SFM) -- Cutting speed on NS head 22M/sec. (4,330 SFM) -- Tolerance within the board +/- 0,075 mm (+/- 0,003") -- No motor installed -- 63" x 103" Abrasive belt size. (to be confirmed) -- Air jet abrasive belt tracking. -- Variable feed speed 7 - 43 M/min. (24' -138"/min.), 20 HP feed motor,. -- Control panel for this machine Not included: -- infeed and outfeed conveyor -- Conveyor between the machine -- “all the control wiring goes into a cabinet that is separate on each machine. That is just the wiring for the sensors and solenoids for braking and belt tracking stuff. There are no motor controls with these so there are no starters included. The 2 head comes with (2) 150 HP motors and the 4 head has no motors on it. In order to make these operational you would need a PLC and HMI to run the controls and motor starters and would need to buy motor controls

STEINEMANN Type OSUS NOVA-RSA-190K Sanding Line;Complete with the following major components and features: -- (4) Sets of top & bottom opposed heads (8 heads total). -- Final head is equipped with Platen Sanding (smoothing bars). -- ISS thickness sensor system. -- 1900mm (74 inches) Max. Working Width (sander only, grade line width is a nominal 5 feet). -- CONVEY-KEYSTONE Vacuum Panel Feeder. -- CONVEY-KEYSTONE Canted Roll Infeed Section. -- CONVEY-KEYSTONE Canted Roll Outfeed Section. -- CONVEY-KEYSTONE panel grading system with (3) sort bins; automatic bin selection & discharge. -- STEINEMANN sander controls and control cabinets associated with the sander system. -- (3) Sections of ALLEN-BRADLEY Series 2100 Motor Control Centers (MCCs). (One small section to remain behind for further plant use.)NOTES: &#9679 This is a sanding line designed for manufacturing MDF or Particle Board. Thus, it is built for large capacity. &#9679 Still in place. &#9679 Last in service about 1½ years ago (2021).

Stenner 36" Bandsaw, older unit but was running when pulled out of production.

Stenner VHC Resaw Accepting offers

Stenner Resaw VHJ Size 105 S/N 8700

2003Sterling Acterra 7500 Model Acterra 7500 Great running truck Milage - 141, 000

2006 Sterling LT9513 Service/Mechanics Truck Eaton Fuller 8LL Transmission 18,000 Front Axle 46,000 Rear Axle 245,000 Miles Service Compartment Body With Built In Bed IMT 12/89 Knuckleboom Crane Hose Reels Front 24,000 Winch Rear 24,000 Winch

MLS Number 10824122 Sterling Dump Truck Cat C12 engine 9 speed Big bed

MLS Number 13132824 2006 Sterling Logging Truck 135k miles Sterling MBE 4000 450 HP Prentice 124 Extendaboom

Sterling Blower with 25HP Electric Motor Shop #744

15 HP Dust System

STETON P85 Hydraulic Cold PressSingle platen hydraulic cold press -- Platen size 1,300 mm X 2,500 mm (51" X 98") Overall platen size -- Side loading on 98" side. -- 420 mm (16.5") Max. daylight opening. -- Pressure from bottom (6) 3.34" diameter upstroke hydraulic pistons. 2 HP hydraulic pump. 90 PSI.

Stetson-Ross Model 372 Heavy Duty Grinder/Jointer

Stetson-Ross planer head sharpener

Stetson Ross Kerf Saver Resaw Recrowned band wheels New starter Work ready Only gets used a few times a year and no longer need it

Stetson-Ross Moulder frame Boxes of parts

Stetson ross profile grinder

STETSON ROSS Planer Feedtable - Model 503E pineapple feed table. Nice unit. Opens to 8" tall material.

1997 Stewart & Stevenson Enclosed Generators Two Units Available To Choose From 2,000 kw 2,935 HP Turbo Charged 20 Cylinder 149 Series Detroit Diesels Model 20EO200324 Synchronous AC Generator Ends Each Unit Under 900 Hours Of Operation With External Fuel Tanks Run Like New Last Documented Service Aug 2019