Equipment For Sale

CAT C4.4 TIER 4F DIESEL ENGINE (110 HP) FEEDER HOPPER W/HYD ADJUSTABLE LANDING LEGS VARIABLE SPEED CONTROL WITH BIOMASS DISCHARGE AUGER CONVEYOR 73’ 10” DRUM CENTER TO CENTER 48” WIDE 3PLY BELT HYD RAISED AND LOWERED BOOM HYD FOLD OVER FOR TRANSPORT FULL LENGTH SIDE SKIRTING ALONG MAIN CONVEYOR TWIN HYD DRIVE DISCHARGE CONVEYOR UNDERCARRIAGE WITH HEAVY DUTY TRACKS RADIO REMOTE – START/STOP FEEDER, RAISE/LOWER DISCHARGE, REVERSE AUGER HEAD DRUM BEARING GAS CARTRIDGE AUTO GREASING LOW LEVEL GREASING – TAIL DRUM

DEUTZ TD 2.9 L04 (60HP) LARGE CAPACITY BIOMASS HOPPER 78'9" DRUM CENTRES GIVING A MAX STOCKPILE HEIGHT OF 34'6" AT 25 DEGREES 42" WIDE 3 PLY BELT HYDRAULIC FEED HEIGHT ADJUSTMENT HYDRAULIC FOLD FOR TRANSPORT CRAWLER TRACKS WITH PENDANT CONTROL SYSTEM 2 SPEED TRACKING LOW LEVEL GREASING

2015 Terex R265T Rubber Track Loader, 980 Hours, 74HP Cummins Engine, Cab/Heat/A/C, 2 Speed, Hi-Flow, 72 Bucket, Completely Serviced. Please Call For More Info

Terex TBC430T Wood Chipper 1800 hours Remote control UC 85% Cat engine

C18 Cat 765HP, New valve banks.  Remote control FOB CANADA - FOR DELIVERY OPTIONS CALL

2015 Terex R070T Rubber Track Skid Loader, 568 Hours, (Same As ASV RT30), 48 Bucket, Cab, Just Serviced, 30 HP Engine, 48 Wide, Joystick Controls.

2014 Terex Phoenix 3300 trommel -8900 hours -Rebuilt engine and new main pump -Belts are in good shape -Has self-cleaning tail pulleys -New fluids Everything works as it should !!!

2019 Terramac Rat9 Track Dump With 600 hours, A/C &Heat, Radio, Work Ready. Machine Weight (with rock bed) 26,180 lbs. Full Length 19’ 6” Full Height 9’ 11” Width Over Tracks 8’ 3” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TERCO NORTHSTAR 10-8 Spindle Carver.8-Spindle Carver with 10" center-to-center chuck spacing. -- (2) 0.5 HP - 3,450 RPM spindle motor direct "belt drives" spindles for 11,000 RPM rotation. -- 36" Long carving cap, with optional length extensions up to 72". -- Manual rotation for round parts. -- Operator manually traces the pattern details of the master with copying stylus. -- Capable of doing both base relief (flat backed) and 360° full round carving. -- Includes: (1) Set roughing bits, (2) sets finishing bits, tools, and manual.

2024 Texas Pride Tri Axle 34ft lowboy with HD drive over fenders- 27K GVWR factory derated to 25999. Upgraded to 12 in on center crossmembers, mammoth ramps, upgraded coupler

CMS represents Big on Dry (BOD) Thermo Wood Kilns in the USA. This system is another on elf our customers in the USA who is producing mostly poplar and oak decking. Big on Dry has improved the Thermo-Modification process with their THERMOWOOD (THW) line and provides complete "turn key" systems. The PLC control systems allow programming for a wide variety off wood applications. This allows the same systems to work with very delicate wood that is hard to treat to thicker wood that will be used for outdoor products. The THW system can also be used as a conventional kiln with steam. Basic systems include: - Kiln completely built with stainless steel and aluminum - Initial humidy of 10-15% is reduced to 5-6% - Loading options: Side or Trolley - Heating options: Gas or Wood Burner - Humidification: Combined Spraying System

Thermwood C42 CNC Router (2) 5'x5' Tables It has 2 large routers, 4 smaller routers, and 2 aggregate heads in the turret Travainni Vacuum Pump Note from Seller: Includes two shaper heads that are not mounted into the turret and one pneumatic drill head that is not mounted into the turret. I also have one seat of Microvellum cabinetry program that I will transfer to you along with the purchase.

Thermwood Model M90-510 5-Axis CNC Router Less then 20 hours on this system - only installed and training. Ready to be removed!

MLS Number 11772789 2015 Thermwood FB53-510 CNC Router Very good working condition Low hours. Used for only 1 year. Excellent condition Moving gantry, fixed table, roller hold down CNC router Designed to machine low profile sheet materials(MDF, plywood, particleboard) Uses Microsoft Windows 10 Professional operating system

Table Size: 5' x 10' Spindle: 18 HP HSD Max. Spindle Speed: 18,000 RPM Number of Axis: 3 Gantry Clearance: 10.5? Z-Axis Stroke: 6? Power: 460 V, 3 Phase Approx. Shipping Weight: 12,000 Lbs. Approx. Shipping Dimensions: 7' W x 16' L x 8' H Equipped With: Roller hold down 5 position Typewriter Arm Style Tool Changer Daylight touch off sensors Equipped for Vacuum Hold Down Windows 2000 Operating System

Thomas Return Conveyor This was used behind a Holzher Edgebander

thompson-Lane Saw Guide Milling Machine S/N 9 3 1

Thompson Lane Saw Guide Milling Machine

120,000 lb Thurman digital Scales 10’ X 60’ Above Ground

Tidland 470 Sander This system was used in a particle board plant that has been closed around 10 years.