Equipment For Sale

1991 Valmet 503 Feller Buncher, 3 Wheel Machine, Has 18" Tree Shear, Deutz Diesel Engine, Joy Stick Controls, Air Conditioning in Machine, 28L x 26 Tires 90% Tread, All Cylinders Repacked, Serviced Recently. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Valmet 840.2, 19,188 hrs., Fixed cab, 2 speed trans., Hydro brakes, Trellebong Forestry Tires 600-55-26.5 75%, preheater, NEW drive pimp, drive motor, transmission bearing kit, shift plunger, and shift fork installed, $79,500

2005 Valmet 911.3, 15,602 hrs., SISU 74ETA Engine w/2 spd hydrostat trans., Webasto pre heater, Rear Tires 700-55-34 / Fronts 700-55-26.5, all tires roughly 60%, 370.2 harvesting head, paint, guards, glass, doors, windows, mirrors all in good shape, $29,500

2007 Valmet 840.3, 13,863 hrs., Turbo diesel, 6x6, Differential lock, Valmet CRF 8.1 crane, extendable boom, Bypass Grapple w/rotator, approx. 72" decking blade, EROPS, Joystick controls, Heat/AC, Radio, Maxi monitor, 600/65-34 front tires, 600/55R26.5 rears, $79,500

2007 Valmet 425EXL, 15,223 hrs., Quadco Head, 2 speed trans., Undercarriage roughly 60%, Hydraulic pump seals and many hoses replaced, $89,500

2008 Valmet 911.4 Harvester, With 2013 365.1 Processing Head, Engine has 16,000 Hours,Upgrades and new parts in machine includes, -New hydraulic pump, New computer and new screen, valve banks resealed on chassis and crane in 2020, all boom cylinders repacked 2020,New wiring down boom and to head, tilt cylinders repacked,. knife cylinders repacked, center section of valve bank resealed, New spherical ends and pins on knife cylinders, New wiring for measuring wheel, New diameter sensor, both feed roller motors resealed, new head rotator motor, New secondary boom section, New PCX-4 Computer and Screen. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Valmet 430FXL-1, 7452.2 hrs., Quadco fixed bunching head, leveling cab, Heat/AC, AM/FM Raido, Undercarriage in excellent shape, Standard tracks w/30"pads, new front idlers installed, cab/seat in nice shape, as well as the paint and all panels and guards and glass, $169,500

Parker/Voac Complete valve body- 0 hours since resealed- with paperwork - for Valmet EXLs

Hands-down, no question, the cleanest Valmet 425EX on the market! 4500 hours, meticulous owner with no expense spared in upkeep and maintenance on this machine. Only 1800 hrs on an upgraded 300 hp 8.3 Cummins. Dry, tight and no disappointments. Equipped with a Quadco 22B 360

Valmet 415 EX parts available

Good used front rear end center differential for a Valmet 546 series 2 forwarder.

Like New Ryans Dangle Head Model 3550 400 Hours Dual Brake System 18.5K Frame Hours 8200H on 6.7 Cummings 70% U/C Heat/AC

Valmet/Timbco 415EX complete bottom- track frame, track groups, rotary manifold, final drives, drive motors, and more

Valone Kone ring debarker, electric drive, includes infeed/outfeed, working condition

1986 Valon Kone 22" Ring Debarker with Hydraulic feed rollers

Valone Cone 22" Ring Debarker

The Vantec Automatic Rotary clipper is designed to clip 2800 mm veneer sheets into specific sheet sizes as per the auto stacker preselection. It comes with electronic drive panel, automatic gauge system, positioning of clipper knife by Servomotor and encoder. It is de- signed to work with one tensioned clipper knife with gear motor. It also comes with a 2 HP motor on the output. The clipper knife is not included. - Veneer Thickness : 1 to 4 mm; - Max. Log: 2.750mm; - Minimum veneer width cut: 800 mm; - Max. Veneer length cut: 2700 mm; - Min. Veneer length cut: 700 mm; - Min. Venner rounding length: 150 mm; - Rotor gear motor: helical gears; - Clpper rollers power drive: 4 hp 6P; - Outlet conveyor Motor: 2hp 4P (input) 1 hp 8P (output); - Clipper Servomotor: 40 Nm (2x); - Width: 4800 mm; - Length: 6000 mm; - Height: 1700 mm; - Approximate weight: 7.000 kg

Multirip circular saw for block cutting, with reinforced structure and high production speed. Trailed top and bottom rollers, upper rollers with adjustment, shafts with cartridge system for quicker and more efficient replacement of the set of saws, U-beam base with levelers and central lubrication. It does not come with the circular saws. - Maximum inlet width: 600 mm; - Minimum inlet height: 70 mm; - Maximum inlet height: 160 mm; - Double arbor: Ø 80 mm; - Number of saws per axle: 10x; - Exterior saws Ø: 350 mm interior saws - Ø: 110 mm; - Upper press rollers: 2x; - Bottom rollers: 6x; - Max. Feed speed: 35 m L / min for logs - 160mm above in diameter; - Max. Feed speed: 40-50 m L / min - only for logs 130-160mm in diameter; - Lower main motor indicated: 200 hp 2p (1x) Included; - Top main motor indicated: 150 hp - Main motor belt: 4 / 3v (8 Pcs); - Motor traction of the rollers: 5 cv 4p; - Gearmotor: GS (crown and pinion); - Length: 3366 mm; - Width: 2782 mm; - Height: 2233 mm; - Approximate weight: 5.470 kg

The Vantec Wood Wast Drum Chipper is used to produce chips from logs and veneer waste. It has a roller infeed system, rubber conveyor belt and hydro-pneumatic unit to lift the rotor for maintenance. Manufacturer specs: - Width of inlet: 600 mm; - Height: 200 mm; - Rotor diameter: 600 mm; - Toothed roller: 01 upper and 02 - lower; - Grooved rollers: 01; - Rollers gear motor: GD (helical - gears); - Upper Rollers motor size: 5 hp; - Upper Rollers motor size: 5 hp; - Feed speed: 40m/min; - Number of rotor knives: 02; - Wood chip size: 30 - 40 mm; - Chipper screen: size: 65 x 65mm - Main motor 100 hp 4P: Included; Drive panel: Included; - Estimated production: 38 m3 / h (it may vary according to the type of material and time used with blade sharpening); - Infeed conveyor length: 3 500 mm (included); - Width: 1 650 mm; - Height: 1 .000 mm; - Overall length: 5800 mm; Approximate weight: 2,900 kg.

This Wood Drum chipper PT750 is used in production of wood chips from logs and veneer waste. It has a toothed roller system that allows efficient material infeed, rubberized conveyor belt and Hydropneumatic unit to lift the rotor cover for maintenance. It comes with 01 chipper Knife set and 01 nose bar set. It does not come with the output conveyor. Width of inlet: 750 mm; • Height: 300 mm; • Rotor diameter: 800 mm; • Toothed roller: 03 upper and 03 lower; • Grooved rollers: 01; • Rollers gear motor: GD (helical gears); • Upper Rollers motor size: 7,5 hp (2x); • Feed speed: 35 m/min; • Number of rotor knives: 02; • Wood chip size: 25 - 40 mm; • Chipper screen: size: 70x 70mm; • Main motor 200 hp 4P: Included; • Drive panel: Included; • Estimated production: 65 m3 / h (it may vary according to the type of material and time used with blade sharpening); • Lead Time: 240 Days • Infeed conveyor length: 3 500 mm (included); • Width: 2 500 mm; • Height: 1.250 mm; • Overall length: 7 300 mm; • Approximate weight: 8 750 kg.