Equipment For Sale

WINTERSTEIGER - DSG 150 ECO, ...Thin Cutting Frame SawSide & Center Guides: Fitted as standard on the basic machine to guarantee the broadest possible range of application. Specifications: -- 11 kW (15 HP) Main motor; 0.3 - 1.5 MPM feed speeds; 210 mm saw frame stroke with (450) strokes/Min. -- 30 - 216 mm Cutting height, adjustable as required; max. +/- 0.5 mm difference in block height. -- 60 - 150 mm Cutting width (side guide); (2) 23 - 70 mm cutting width (using center guide); (2) channels max. 72.5 mm using 7.5 mm guide or with (5) channels max 24.5 mm using variable block width; 300 mm min. block length. -- 1.5 mm Cutting accuracy; +/- 0.2 mm Cutting loss (depending on saw length). -- Max. (30) saw blades (excluding scraper saws); (3) 120 mm sawdust extraction tubes. -- "Air Jet" Module: Cleans the lamellas and saw blades during the sawing process by blowing away the sawdust; cools down the saw blades during the sawing process and cleans the shaving space of the saw blades. -- "Air Jet" also increases the saw blades life and improves the lamella's accuracy. Sawdust-free lamellas can then be glued immediately after cutting.Comes with transformer

Wintersteiger DSG Sonic Frame Saw

Section of WIREWAY HUSKY Teardrop Pallet Racking Equipped with: (4) 18,000 Lb. Cap. 8-1/2’ H x 3-1/3’ W Teardrop vertical frames, with 3” W x 1-5/8” Thick Frame beams, Step beams vertically adjustable on 2" Centers. (8) 9’ L x 4-3/8” H x 2-5/8” D Step beams, with 1-3/8” H x 1” D Step.

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

For sale, used trade-in Wolfe Ridge 35 HDI Box Wedge machine. Customer had two of these machines, and traded one in on a new VS. This machine has 360 hours on it, and was just gone through at the shop here ready for its new owner. Pick from your choice of box wedge - ONE included with the machine - 3x3, 3.5x3.5, 4x4, 4.5x4.5. Traditional 2/4 way wedge with bolt on height adjustment is also included. Honda GX630 v-twin gas engine, 35 ton splitting force. Please call 715-598-7790 for more information. Located at our factory in Eau Claire, Wisconsin but can ship anywhere in the US or Canada.

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

2020 Wood Beaver 18 BAB Only 245 hours Shrink wrap machine also available

Wood-Mizer LT40 Super Hydraulic Electric 3180 hours Includes power inverter Currently under power and in production PRICE REDUCED

REDUCED TO SELL!! Wood-Mizer LT-300 W/ Infeed log deck, outfeed incline belt LT300, 3-way outfeed conveyor, includes extra blades, 9,400 hours - Wood-Mizer 24 x 19 belt outfeed conveyor and electric drive, S/N 10004089A2.00 - Wood-Mizer TD2D12 3-way separator, S/N 1004027A1.00 - Wood-Mizer 25.5’ (2) strand log infeed deck w/ hydraulic stop & load & hydraulic drive Complete mill (ref # 162) Call Amy for more information (928) 723-9449

2005 Wood-Mizer LT300 thin kerf 30 HP horizontal band mill w/ soft start mounted controls, 2,900.5 hours, hydraulic dogs & stop & load, electric carriage w/ (2) new inverter drive motors w/ setworks – electronic & latest generation - 12’ x 5’ (2) strand infeed log deck - 20’ x 24” belt w/ shaft mount electric drive w/ MCC - 6’ x 8’ catch & roll table - Includes spare parts - 25’ (2) strand lumber sorting chain w/ detachable link chain & 7.5 HP drive - 2019 Accucut hydraulic feed edger w/ 30 HP motor, (2) laser line lights, (1) movable saw & moves w/ operator’s wheel steel table infeed & outfeed, 24” wide cutting space, mounted blower and (3) sets of (2) piece split edger blades (ref #145)

HR500 Woodmizer 2hd Bandsaw. Located in NY. #C914

System includes: Wood-Mizer LT 70 Sawmill Wood-Mizer 2 Blade Edger Wood-Mizer 2-Head Resaw Norwood 2- Blade Resaw All powered by electric motors All decks and conveyors

6 Head Resaw with Auto Run-A-Round

WM4500 30 HP Electric 480 V/60 Hz 3PH | Edger 30 HP Twin Blade 460v 3PH. 590 hrs | Serial Number WM4500EC30 09230769 A4.02

portable, Trailer road ready, 6434 hr. on a 38 Hp Kohler motor, manual setworks, the full hyd. log loader, clamps, 12v on the debarker and the hyd. pump. New brushes on the 12v system. 36"x 21' cutting capacity, Bd. return, 15 New blades 6 dual blades included, Call 717- 201- 1447

Wood-Mizer Sawdust Conveyor 3 phase power: Currently wired 48V0 but it can be wired 240V. The flat length is 21', the elevated is 11', the height is 5', and the width over all is 16".

Wood-Mizer Rooftop Chain Conveyor 4 Strand Good Condition

Fully Hydraulic, Wide increases max width of cut to 34", Diesel engine with 1800 hours, Portable, Debarker (not connected), Lubemizer, Fine Adjust Legs, Remote Operating Station, Cap: 36” log diameter, 21’ log length, and production up to 675 bf/hr. Call 800-459-2148 for more info.

Wood-Mizer LT40 Hydraulic Band Sawmill, Portable, Debarker, Lubemizer, Serviced in November 2023, very little use, 2005, CAT Diesel Engine 37 HP, 991 hours. Call 800-459-2148 for more info.