Equipment For Sale

Hemco double end trimmer w/ even end rolls, feed through chains & outfeed chains (trimmer can sell with stack and sort line upon request),ref#170, Call Amy for more information 928-723-9449 OBO

Hemco Lumber Trim, Stack and Sort Line – (4) strand infeed w/ destacker and waterfall unscrambler board dealer to Hemco (9) station drop saw trimmer w/ controls and block conveyor, Hemco (11) bay lumber sorter w/ 75’ of haul out chain, includes hydraulic power packs, waterfall unscrambler to (4) chain arm stacker, 8’ wide, unground cylinder ground package hoist, stacking stick conveyor included, includes controllers & Dell PC View Sonic screen, Sullair LS-10 tank mount air compressor, Call Amy for more information 928-723-9449 OBO

Hemco Sorter Line System includes: - Unscrambler - Board Singulator - Even end roll case - 34 Sling Bays - 10 Slot Bays - Stacker Outfeed - Trim Saw

Hemple CL-8 Wood Turning Lathe 20” capacity will turn to 1/4” diameter manyal feed but auto cycle up to 400/hour 220 volt 3- phase

Hemple CL-8 Wood Turning Lathe 20” capacity will turn to 1/4” diameter manyal feed but auto cycle up to 400/hour 220 volt 3- phase

Hemple CL-8 Wood Turning Lathe 20” capacity will turn to 1/4” diameter manyal feed but auto cycle up to 400/hour 220 volt 3- phase

Hemple 10 Spindke Sander lots of sand paper rolls mincluded

Hemple 10 Spindke Sander lots of sand paper rolls mincluded

HENDRICK PETS Overhead Rail Panel Saw -- 8' Max. cutting cap.; 7.5 HP saw motor; 5-1/4" cutting capacity and 1" Dado Capacity. -- Carriage rides on 2" dia. hardened steel precision ground rails; 16" dia. blade capacity. -- 0 to 50 FPM infinitely variable D-C carriage drive; push button control console including separate controls for forward and reverse carriage drive.

Henke 5HP Piston Air Compressor w/ Tank

HewSaw SL250 Trio sawing line from 2005 This line has already been dismantled and loaded into containers. It is ready to ship! - Consists of log positioning devices, conveyors and three sawing machines. HewSaw sawing line is designed to process logs ranging from 100 mm – 420 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 6.2 m - Feeding speed of the sawing line can be adjusted from 50 m/min to 150 m/min. Top diameter: 100–420 mm Maximum log diameter: 550 mm Cant height in Chipper Canter: 75–410 mm Cant width in Chipper Canter: 75–410 mm Cant height in Rip Saw: 63–310 mm Cant width in Rip Saw: 75–410 mm Saw kerf: 4.2–5.0 mm Chip length: 20–30 mm Sawline 1. Measuring conveyor 2. Log scanner 3. Log positioner 4. Chipper canter 5. Cant scanning conveyor 6. Cant scanner 7. Cant saw 8. Seperating conveyor EK2 9. Cross conveyor 10. Belt conveyor 11. Cant turner 12. Infeed conveyor 13. Rip saw 14. Belt conveyor 15. Belt conveyors under machines, for waste handling 16. All electric boxes

Hi-Tech Chipping Edger

Hi-Tech Chipping Edger

High Tech 20' Trim Saw (10) Blades

23' Hi-Tech Scanner with Dyna Vision Lazers & Allen Bradley 1200P Control Console.

High Point 12" Resaw with Return Conveyor

Working daily High Point band resaw upto 12" wide cut, powered baker hold down added. 575 Volt 20 hp motor with 575 5hp motor on the hydraulics. Transformer to 480 volt available. Extra blades and parts. asking $6,000USD. Working daily High Point band resaw upto 12" wide cut, powered baker hold down added. 575 Volt 20 hp motor with 575 5hp motor on the hydraulics. Transformer to 480 volt available. Extra blades and parts. asking $6,000USD Call 800-459-2148 for more info.

Single Head Horizontal Band Re-saw System Model : HP-11P-SMART • Single saw head configuration. • Motor powered set works for accurate saw wheel elevation. • Digital position controller permits accurate saw wheel height positioning. • Automatic blade tension is controlled by hydraulic cylinder. • Variable feed speed by hydraulic motor drive. • The big pressure roller is air cylinder loaded to hold wood down firmly. Specifications HP- 11P-SMART 1. Saves Time and labor costs 2. Pneumatic pressure roller infeed 3. Digital position controller permits accurate saw wheel height 4. Easy to operate and set up Feed speed: 4-27m/min (13-90FPM) Max. cutting height: 250mm (10”) Max. cutting width: 300mm (11 3/4”) Min. workpiece length: 400mm; 205mm with extension set Max. workpiece length: 580mm Distance from blade to conveyor: 4-125mm Saw wheel Diameter: 711.5mm (28”) Saw wheel width: 22.7mm (1”) Saw blade size: 4265 x 27mm (168” x 1’) Blade speed: 2816m/min (9240FPM) Saw Motor: 15kW(20HP) Feed unit: 0.75kW(2HP) gearbox motor with frequency converter Cooling system Oil mist Blade tensioning Hydraulic system Motor for blade positioning: 0.18kW(1/4HP) Dust post: Ø4” x 4 Table height: 902.5mm Machine weight: 951kgs Machine dimensions: 2835 x 2052 x 1678mm (LxWxH)

Hildebrand

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i4u HINO FD2220 20' L Single-Axle Diesel Cabover Box Truck, with 318,374 Miles (As of 10/16/24) Specifications: GVWR 22,300 Lbs. Equipped with: Diesel engine. 6-Speed Manual transmission. SUMITOMO "ST 727" 9R22.5 Front & Rear Tires. MICKEY "VB20103" Aluminum van body, with Interior dimensions 91-1/2” x 241” x 99” H, 2-1/2” Wood ribs on 12-1/2” centers, Wood deck, Roll-up door,