Equipment For Sale

2009 Bandit 2590 Drum Chipper, C13 Cat 540hp, Radio Remote, Infeed chain, Rear hydraulic stabilizer's. Weight 36,500 lbs Width 119 in Height 139 in Length 360 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Bandit SG40 WALK BEHIND Stump Grinder with only 41 hours. Features an aggressive cutter wheel drive system, enhanced operator visibility, and enhances stability. Operator controls are mounted on a 3-poisiton console. Two joysticks control the travel of the unit, while a single, easy to use joystick controls all cutter wheel functions. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2003 Bandit Model 5680 Beast Horizontal Grinder, Engine is a Cat 3412E V12 Engine, 1000 HP, Has 13,000 Hours, Wireless Remote, Air Compressor, Pintle Hitch, Ready to Grind. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2020 Bandit 3680T BEAST Tracked Horizontal Grinder - 1416 Engine Hours - 900 Grinding Hours - Cat C27 w/ 875 HP - PT Fluid Clutch - Remote Control - Automatic Greaser - Automatic Chain Oiler - On-board air compressor - Adjustable Discharge - 36"" Capacity - 30 Tooth Cutter mill This machine was just ran through by the Quality Equipment & Parts Service Department. Bandit dealer of 10 Years. - Infeed Chain: New Headshaft and Tailshaft, new bearings, some new infeed slats - New teeth & rakers on cuttermill - New Screen & Gate - New Poly slide boards on Primary Discharge - New Anvil Bar - On-board air compressor serviced - New grease lines

2018 Bandit 3590 Whole Tree Chipper, Equipped Currently as a Micro Chipper, Can be Changed, C-27 875HP TIER 2 Engine, NO DEF, Has Original 5200 Hours, Smaller Air Compressor Attached, Wireless and Tether Cord Remote Control, More Pictures Coming. Weight 76,000 lbs Length: 43' 5" Width: 11' 10" Height: 12’ 6” Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 200XP 12 inch disc chipper with 86 hp Cat engine, winch, auto feed, hand crank swivel discharge chute, heavy duty aluminum fenders tool and battery boxes. New knives and anvil excellent condition Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Bandit Beast 3680T Horizontal Track Grinder, Hours 920 Hours, Caterpillar 827 HP C-27, Can turn up to 1050 HP, Undercarriage Like New, Wireless Remote Control, PT Tech Clutch, Metal Pully on Discharge, Coloring System with Spray Bars, Various Screen Sizes Machine Sells New Right Under 1,000.000.00 Million Ready to Grind NO DEF ON ENGINE. Length: 37’ 3” 3680XP TRACK 1135.4 cm Width: 11’ 7” Height: 12’ 2” Weight: 85,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2013 Bandit 2290 20” Drum Whole Tree Chipper, 440 Cat Diesel with 3,045 Hours, Tether Remote and New Radio Remote, 5 1/2’ Infeed Conveyor, Babbited Knives, Light Package, Dual Stabilizer... Popular for its great combination of size, production, performance and price, the 20-inch capacity Model 2290 whole tree chipper is a favorite for chipping tops and brushy material, either in traditional logging operations or land clearing projects. Its 24.5-inch by 26.25-inch throat opening easily accepts large diameter, brushy material. Dual feed wheels in Bandit’s unique Slide Box Feed System provide the industry’s best pulling and crushing power, while aggressive chip throwing power fully loads trailers in approximately 35-40 minutes. Length: 21’ 640.08 cm Width: 10’ 2” 309.9 cm Height: 11’ 6” 350.5 cm Weight: 40,000 - 46,000 lbs (18,143.7 - 20,865 kg) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Bandit 3680 with Cat 3412 860hp, with 8,000 hours. Radio remote, and Magnetic head pulley. Redone summer of 2021. Ran sept 21-March 22 parked until June 22 did a 3 week job then parked until November 22. Ran until March 23. Newer floor, Frame restructure, All hydraulic cylinders and hoses replaced. Hydraulic tank drained and cleaned. New: Clutch, Drive belts, Starter, Anvil, 2 augers and bearings and chain, Discharge top bearings and motor. Length: 44’ Width: 10’10” Height: 13’ 6” Weight: 62,500 lbs. Fuel Tank: 400 gal. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Bandit 150 Chipper 7300 hours Deutz intercooled engine No blow by New teeth New drum bearings New springs Good tires Work ready REDUCED

Bandit 2550XP Stump Grinder -Kubota gas engine -Beltless hydrostatic direct-drive -Standard 4-wheel drive -35” wide grading blade -Rubber tires -Approx 150 hours REDUCED PRICE

Micro Chipper C-27 Tier II 875 HP 5173 Hours

2012 Bandit 4000T W/Mulching Head, 2892 Hours, Deere 425 HP Engine, Please Call For More Info

2023 Bandit 2590T Beast -160 hours -Gold warranty -Fully loaded -On tracks

2008 Bandit 1590XP Drum Chipper with140hp John Deere Engine, winch, auto feed, lift cylinder, Ex municipal machine in very good shape. Length: 12' 6" Width: 8' 6" Height: 9' 3" Weight: 12,500 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Bandit 1850 Whole Tree Chipper Deere 325HP Turbo Engine, Engine had a complete engine rebuild 500 Hours Ago, 360 Degree Grapple Rotation, Heat and Ac in Cab Ac is not hooked up, ONLY 6,100 Original Hours, Joystick Controls. Length 282” Width 102” Height 156” Weight 20,000 lbs.

2017 Bandit Beast 4680T -1800 hours -1050 hp Cat c27 -Spare New Screens -48 tooth mill -New overband magnet -Newer discharge belt

2022 Bandit SG40 Stump Grinder, Kohler 38 hp EFI Gas with 238hours, New Belts, 18” diameter x 1/2 thick New Revolution cutterwheel with 47” swing, Adjustable rubber tracks. L 100.5” W 29” H 48” Lbs 1,500 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Bandit 200XP 86 hp Perkins Diesel. Yellow 12” Disc Brush Chipper. Width. 72 in. Height. 100 in. Length (Open) 202 in. Weight. 5500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.