Equipment For Sale

BALEMASTER - EO-1700: Auto-Tie Horizontal BalerSpecifications: -- Model: 5,250 (EO-1700). -- YMG: 2003. -- Motors: (2) 25 HP. -- Cylinder: 10" . -- Feed opening: 75" x 45". -- Bale: 48" W x 40" H x variable L. -- Touchscreen. -- Air/Oil Cooler. -- Bale table. --Boxes of bale wire included

BALEMASTER - EO-650: Horizontal Auto-Tie Baler Specifications: • 25 HP Motor.• 8"; Main Cylinder.• Hopper Opening: 46";x 50";.• Bale Size: 48"; x 30"; x (variable).• Main Ram Face Pressure: 75 PSI.• System Pressure: 2,000 PSI.• Total Compression Force: 100,500 Lbs.

BALEMASTER - 760AO, ...Horizontal Closed Door BalerSpecifications: -- Cylinders: (2) 6" -- Feed opening: 60" x 40" -- Bale size: 48" x 72" x 34" -- Main motor: 25 HPEquipped with: -- (4) Wire single-loop bale ties -- Heat exchanger -- Photo-eyeNote: Dog ear springs need to be replaced and a small leak by the motor; otherwise, in great condition.

BALEMASTER 772 AO WIDE MOUTH HORIZONTAL BALER -- 25 HP motor -- Dual door cylinder -- Bale size 48" W x 26" H x 48" L -- Feed chute cross section 46" W x 48" L -- Air to Oil cooler included -- Number of bale ties 5 -- Loaded on your truck

2-Machine System consisting of BALESTRINI "PICO" Round End Tenoner & BALESTRINI "MICRO.N" Slot MortiserSpecifications -- "PICO" Round End Tenoner: Left & right "twin" tilting tables (one table is always in the cutting position); 14" x 9" tables tilt 0ø - 20ø, both table fences with pin stops for indexing stile and rail doors. -- Fences swivel up to 45ø, each table with vertical pneumatic holddown; 4 HP cutter block motor, 1 HP cutter block rotation motor, 9,000 RPM spindle speed. -- Capacity: 3-15/16" (100 mm) Max. tenon length, 1-3/16" (30 mm) max. thickness, and 1-31/32" (50 mm) max. depth. - Hourly production rate of (600 - 700) tenons."MICRON" Slot Mortiser: Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots.Note --The PICO has a timing issue and may just need to be adjusted.

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

BALESTRINI C 70 Double Sided Feed Through Copy Shaper;Profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation. -- Reversing rotation by switch for climb cut or conventional cut. Specifications: -- Max. working width 358 mm (14-1/8"), max. working height 118 mm (4-5/8"), min. working length 240 mm (9-1/2"); max. size of cutter blocks 90 mm x 120 mm and up to 3/8" vertical adjustment of heads. -- Part on template block is being shaped by running between spring loaded spindles with copy bearings following the template pattern. -- 1 HP variable feed motor 3 - 26 FPM, hand crank adjustable horizontal rubber infeed & outfeed holddown rollers. -- Machine has (2) 120 mm diameter dust outlets. -- Machine dimensions: 53" x 49" x 43" Machine weight: 2,310 lbs.

BALESTRINI 2 CAP Mortiser --Automatically mortises or bores round holes in chairs or case good --Specifications -- Twin tables with pneumatic holddown clamps, (1) on each side eliminating dead cycle time, 19" long tables tilt left or right 0ø to 20ø. --Equipped with & Features -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with adjustable bronze gibs and move by rack & pinion, -- (120) to (240) oscillations/Min; 4-23/32" max. oscillation length, -- 3-1/8" max. depth, 7/8" max. bit dia., 13 mm spindle collet dia.

Bandit 2550XP Stump Grinder -Kubota gas engine -Beltless hydrostatic direct-drive -Standard 4-wheel drive -35” wide grading blade -Rubber tires -Approx 150 hours REDUCED PRICE

Micro Chipper C-27 Tier II 875 HP 5173 Hours

2012 Bandit 4000T W/Mulching Head, 2892 Hours, Deere 425 HP Engine, Please Call For More Info

2023 Bandit 2590T Beast -160 hours -Gold warranty -Fully loaded -On tracks

2005 Bandit 2400T Whole Tree Track Chipper , Only 3,021 Original Hours, Undercarriage is 95% Enclosed Operators Cab with Heat and Cold Air, Caterpillar 765 HP Turbo Diesel Engine, Cat Infeed Chain with 4 Roller Feed System., Autofeed , Hydraulic Swivel Discharge, Hydraulic Flapper Engine Pre Cleaners Hydraulic Oil Coolers Rotobec 360 Degree Grapple... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Bandit Intimidator 15XPC Brush Chipper, Gasoline Engine, Trailer Mounted, Hour Meter Reads: 512

2021 Bandit 3680T Wood Grinder -147 Hours -5 Year CAT Warranty -Excellent Condition - More photos and info coming.

Bandit Chipper with hydraulic dumping hopper 3-cylinder Deutz air cooled engine New hoses and freshly painted

New In Stock Bandit SG40 Stump Grinders, REV Wheel, 38HP EFI.

New Bandit 2290 Tracked Whole Tree Chipper, In Stock for Sale or Rental.

2016 Bandit 3680 Beast Horzontal Grinder, Cat C27 with 2800 Hours, 30 Tooth Mill, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Bandit 250XP Chipper, Engine Meter is tough to read, Runs Solid, Hydraulic Winch, Telescoping Hitch, Autofeed, Caterpillar 140 HP Engine, Live Hydraulics, Hydraulic Lift Cylinder, Hand Crank Height Chute, Aluminum Tool and Battery Boxes, Electric Brakes. Length: 18’ 6” Width: 7’ 1” Height: 8’ 6” Weight: 7,200 - 7,800 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.