Equipment For Sale

MATTISON 404 Straight Line Rip Saw;Specifications: --25 HP - 3,600 RPM Direct drive arbor motor; --14" dia. max. saw blade cap. (9" smallest dia.), --1-1/2" dia. arbor; 4" thickness capacity. -- Table size 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. --Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. --Chain with automatic oil lubrication. -- 2 HP Feed motor with (4) feed speeds 62, 93, 124, & 186 FPM

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 20HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capy. -- Table size: 65" x 77" Long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication. -- 2 HP Feed motor with (2) feed speeds of 50 & 100 FPM. -- Laser light -- 480V to 240V Transformer -- Comes with some 12" 30 Tooth bladesNote : Seller claims the saw will give a glue line

Mattison side head grinder. Older but accurate and heavy duty $2,400 - Call 218-638-2810 or 218-410-0548

The Rip Saw is still in good running condition and still in use.

Mattison 404 Straight Line Rip 230 Volt 3 Phase 25 HP Total 230/460 Dual Voltage on 20HP Mandrel Motor

Description Mattison "55-F" Turning Lathe - Back Knife 30" Cap. in length and 4" x 4" cap. dia. - Pneumatic feed; rear arbor with cutter-head driven by a 10 HP V-belt motor. Work piece rotation is belt driven by main motor with variable speed gear box, double end drive, mechanical feed of work piece into cutter head. Rear dust shroud with collection outlet.

MAX - 36-SD, ...Double Disc SanderHeat treated and dynamically balanced 36" aluminum disc. -- Commercial duty; 5 HP motor base mounted with multiple drive belts. -- Heavy cast iron 16" x 46" table w/miter gauge slot. -- Easy precise tilting of the worktable with: 45° Forward &30° back. -- Rack & pinion adjustment of the table: Rise & fall; rack & pinion tilting of the table. -- Sanding station is mounted to (4) 3-1/2" heavy columns. -- Heavy bolt-down cast iron base.

Heat treated and dynamically balanced 18" aluminum disc. -- Commercial duty 1.5 HP direct drive motor. -- Heavy cast iron 10-1/2" x 24" table w/miter gauge slot. -- Easy precise tilting of the work table with 45° forward and 30° back. -- Rack and pinion adjustment of the table rise & fall and manual tilting of the table. -- Sanding station is mounted to a heavy column. -- Heavy bolt-down cast iron base. -- Optional: Upgrade to a 2 HP motor add.....$240, Miter gauge add.....$270, Rack and pinion movement of the tilt add....$400, Single Phase 1.5 HP motor add.....$120.

MAX Spindle Sander VSI Made is USAOscillating Spindle Sander constructed for rugged use. -- 1 HP Motor drives and is connected through a flexible coupling, and can be installed or removed without disturbing the drive mechanism. -- Spindle speed 1,725 RPM, Oscillation speed 75 Cy/Min with 1-1/2" stroke length. -- Spindle quill runs in precision ball bearings, oscillated by a heavy duty worm & gear mechanism running in a bath of oil. -- (10) spindle sizes provided: 1/4 x 5", 3/8 x 6", 1/2 x 6", 5/8 x 6", 3/4 x 9", 1 x 9", 1 1/2 x 9", 2 x 9", 3 x 9" and 4 x 9"; 100 grit abrasive sanding sleeve with each spindle. -- Large 24" x 24" precision ground cast iron table mounted on large trunnions that can be tilted 45° down and 30° up by use of a convenient handwheel. -- Complete with: Pedestal style stand.

Heat treated and dynamically balanced 36" aluminum disc. -- Commercial duty 5 HP motor base mounted with multiple drive belts. -- Heavy cast iron 16" x 46" table w/miter gauge slot. -- Easy precise tilting of the work table with 45° forward and 30° back. -- Rack and pinion adjustment of the table rise & fall and rack and pinion tilting of the table. -- Sanding station is mounted to (4) 3-1/2" heavy columns. -- Heavy bolt-down cast iron base. -- Optional: Motorized table elevation add.....$16, Motorized table elevation with limit switches add....., Electric brake add....., Circular attachment add....., Miter gauge add..... Hoist (chain drive lift for heavy parts) add..... JIL package (oil/dust proof switch components) add.. OPTIONS QUOTED UPON REQUEST.

MAX-PAK - HOE-2850-308AR, ...Horizontal Open-End Auto-Tie BalerSpecifications: -- Bale size: 30″ x 42″ x 72″ (variable) -- Bale weight: Up to 1,400 Lbs -- Cycle time: 15.23 Seconds -- Motor: 30 HP -- Cylinder bore: 8″ -- Rod: 5-1/2″ -- Stroke: 70" -- System pressure: 3,000 PSI -- Platen force: 143,256 Lbs - 120.49 PSIFeatures: -- Automatic Wire Tie System -- Heavy wall tubular steel frame -- AR 400 floor and platen -- Hydraulic regenerative circuit and air/oil cooler -- NEMA 12 Electrical panel and Control System -- Conforms to: OSHA &ANSI Z245.5 Standards

MAX-PAK - MP6020-7: Vertical Baler -- Motor: 15 HP. -- Variety of Bale materials: Cardboard; shredded newspaper; aluminum cans; P.E.T. plastics. -- Bale size: 30″ x 48″ x 60″. -- Max. Bale weight: 1,300 Lbs shredded ONP; 1,200 Lbs for OCC.

MAXPAK - HCE60-FE-9: Horizontal Closed Door Baler -- Main Cylinder: 9". -- Motor: 50 HP. -- Full Eject. -- Bale sizes: 60"; x 30"; x 48"; .

Maxi Mill Quade Scragg with Premium Cab & Controls

New portable, wireless truck scale. Level the dirt, set up and weight anywhere. No wires, no concrete slab needed. Powered by deep cycle battery and radio remote controlled. Perfect for Ag, Aggregates, Forestry or any shipping needs where you need to weight your load before you travel on Uncle Sam's highways! Shipping available and set up & training onsite as per request. Call Randy for more details.

One Maxi-Lite Scale Systems New platform New scale with electronics, computer, battery and chains for lifting. Portable, battery operated, wireless scales for any use Timber, Scrap, Mining, etc.

One Maxi-Load Scale Systems platform New electronics, computer, 12V. Portable, battery operated, wireless scales” For any use Timber, Scrap, Mining, etc. Delivery, Setup and Training on your jobsite available.

One Maxi-Load Scale Systems platform New electronics, computer, 12V. Portable, battery operated, wireless scales” For any use Timber, Scrap, Mining, etc. Delivery, Setup and Training on your jobsite available.

MAXIFLOW by AQC V3-6MCH3-36 CARTRIDGE Filter Dust Collector. -- Specifications: 16,000 CFM approx. Filter Cartridge System complete with (36) cylindrical cartridges (130 sq. ft. cloth area per cylindrical cartridge - 13.84"OD x 9.47" ID x 26" long.) for a total 4,680 sq..ft. of filter area; operating at 3.4:1 air-to-cloth ratio. -- Cartridge Specs: SB-820, 100% Polyester Spun-bolded, 8.0 oz/sq. yds. Air permeability 20 -30 cfm/sq. ft. @ 0.5" WG. 200°F continuous operating temperature. -- Comes with: Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges; Sequencing Timer in an enclosure. -- Construction: 11 gage fully welded construction. 1/4" thick plate Tube Sheet. (3) V-shape 66" hoppers under filter housing. Heavy Duty steel legs to position unit approximately 43"' above the ground, providing sufficient clearance for (3) 55 Gal. drums.. Housing rated for +/- 20 " WG. Includes 92) 20" dia. top inlet pipe. -- Equipped with: TWIN CITY Fan, approx. 26" inlet belt driven by a 40 HP , 1800 RPM, TEFC Fan generates 16,000 CFM at 9" WG. Ground-mounted fan/motor. -- Features: ABB 'HVAC' series VFD (Variable Frequency Drive) for variable speed of motor to conveniently control desired CFM.. AfterFilter section with HEPA filters for return air into building with (4) grille sections. -- Services Required: 110V 50-60 Hz; air supply of 12 CFM @ 90 - 100 PSI. Pulses every 10 sec. -- Overall filter dimensions/Weight: 86" wide x 132" long x 160" ht. (156.5" + inlet flange); 6,500 Lbs. -- Seismic rating zone 4, Wind resistance 160 KPH (100 MPH). -- Unit available Oct 1, 2023.

MAXIFLOW by AQC 9MCH4-72 CARTRIDGE Filter Dust Collector. -- Specifications: 35,000 1CFM range approx (depending on application and ACR required). Filter Cartridge System complete with (72) cylindrical cartridges (130 sq. ft. cloth area per cylindrical cartridge - 13.84"OD x 9.47" ID x 26" long.) for a total 9,360 sq..ft. of filter area. -- Cartridge Specs: SB-820, 100% Polyester Spun-bolded, 8.0 oz/sq. yds. Air permeability 20 -30 CFM/sq. ft. @ 0.5" WG. 200°F continuous operating temperature. -- Comes with: Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges; Sequencing Timer in an enclosure. -- Construction: 11 gage fully welded construction. 1/4" thick plate Tube Sheet. (3) V-shape 66" hoppers under filter housing. Heavy Duty steel legs to position unit approximately 43"' above the ground, providing sufficient clearance for (5) 55 Gal. drums.. Housing rated for +/- 20 " WG. Includes 92) 20" dia. top inlet pipe. -- Equipped with: BAE-SW Size 402TWIN CITY Class 4 Air-Foil Fan belt driven by a 150 HP , 1783 RPM, TEFC Fan generates approx 35,000 CFM . Ground-mounted fan/motor. -- Includes: Control Panel. Sprinkler System. Catwalk/Ladder. Barrels & Ducting. -- Services Required: 110V 50-60 Hz; air supply of approx. 22 CFM @ 90 - 100 PSI. Pulses every 10 sec. -- Overall filter approx. dimensions/Weight: 186 W x 111" Deep x 160" H. 9,500 Lbs. -- Seismic rating zone 4, Wind resistance 160 KPH (100 MPH)