Equipment For Sale

Designed for curved casings, crowns, circles, ellipses and straight mouldings. -- Working dimensions: 6" wide x 7" thickness capacity. -- Spindle diameter 1-1/4" with cutterhead speed of 6,000 RPM. 6-1/2" max. cutting circle in horizontal position, 6" max. cutting circle tilted. -- Feed motor 7.5 HP variable speed 0 - 30 FPM. -- Tilting of spindle head 0° - 52°. -- Includes: Hand wheel for spindle height & tilt adjustment, mechanically adjustable fence for accurate and easy positioning. Axial adjustment. Floating work table 30" x 23". -- Linear tracking system guides the work piece smoothly and directly under the cutterhead, while keeping the workpiece flat. -- Includes (1) 4" dia. corrugated cutterhead. Operating video and manual, spare parts list and (1) year warranty. -- Additional options: Proscale digital readout for height and tilt setting .... add $900.00 for each.

Automatically feeds, shapes & ejects Rosette blocks in sizes from 2-1/2" - 5" max. square blocks; 1.5 HP motor belt drives 2-7/8" spindle cutterhead @ 7,500 RPM. -- Operation: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-V holding fixture with overhead spring fingers, cutterhead advances and machines Rosette, then automatically ejects block to front (hydraulic position of block and air eject cylinder). -- Features: Cutterhead equipped for standard 16°/60° corrugated back 1/4" thick knives to be ground at 0° hook angle. -- Produces up to (500) Rosettes/Hr; Rosette profiles can be ground on any profile grinder for infinitely variable design possibilities; table top unit may include base.

Automatically feeds, shapes & ejects Rosette blocks in sizes from 5-1/2" - 8" max. square blocks; 3 HP motor belt drives 4-3/4" spindle cutterhead @ 7,500 RPM. -- Operation: Adjustable hopper feed to side of spindle automatically indexes Rosette blocks under cutterhead up against a corner-V holding fixture with overhead spring fingers, cutterhead advances and machines Rosette, then automatically ejects block to front (hydraulic position of block and air eject cylinder). -- Features: Cutterhead equipped for standard 16°/60° corrugated back 1/4" thick knives to be ground at 0° hook angle. -- Produces up to (500) Rosettes/Hr; Rosette profiles can be ground on any profile grinder for infinitely variable design possibilities; table top unit may include base.

Horizontal Tilting Multi-Moulder with Verical Router System designed for curved casings, crowns, circles, ellipses and straight mouldings. -- Equipped with: (1) 1-1/4" Diameter Spindle, 6" max. width x 7" max. thickness cap., 7.5 HP spindle motor, 6,000 RPM spindle with reverse rotation, 6-1/2" max. cutting circle horizontal, 6" max. cutting circle tilted, 0° - 52° horizontal tilting arbor, hand wheel spindle height & spindle tilt adjustment. -- Variable feed speed from 0 - 30 FPM, DC feed feed motor; hand wheel adjustable thickness opening, 34" x 30" table, independently adjustable feed rollers, and mechanically adjusted fence. -- 3.25 HP, 5-speed Porter Cable router with 1/2" shank included. This allows easy insert & Channels on both straight and curved mouldings. -- Designed to use standard 4" dia. 2-knife cutterhead for 16°/60° 1/4" corrugated back knives, (1) supplied; includes operating manual & video, parts list and covered by (1) year warranty. -- Optional: ProScale digital readouts for height and tilt settings, please add $900 for each, or for the Optional 8’’ spindle and aluminum Cutter-head, please add $3,550

Military Dump Truck All Wheel

Military Truck Automatic Air Brakes

Army pullout truck, manual trans, hyd brakes, good condition

6x6 Military Truck Automatic Air Brakes Cummings Engine

23' x 30" x 8" Roll Case w/ Electric Drive

New Never Installed 2007 Mill Tech Precision End Trim Saw; Clam shell Opening P.E.T Trimmer with 2 Banks of Motorized Saws; Right Hand Lumber Line; Each Bank with W/Zero Saw & 3 P.E.T.Saws W/Infeed System; Operates on Skip Lug Basis with Mill Tech; Inches & Centimeters

Miller Dialarc 250 AC/DC Welder

MLS Number 11983452 USNR M6 Millexpert Edger Optimizer Computer System USNR M6 Millexpert computer system for edger. Installed 2010 and took out December 2022. Has one windows 7 analize computer and one data acquisition computer. Seventeen M6 Dynavision scanner heads, an Allen Bradley PLC-5/40E with five 1771 input cards and seven output cards, four 1771 linear positioning cards. Three TT5RBU0240 24” stroke temposonic wands, four 60” stroke TTSRBU0600 wands. Seven Moog model 641F229C valves. Two operator panels.

Milwaukee 8" Panel Saw

Miner 3 blade vertical edger, 50 hp electric drive, self-contained hyd unit, includes various spare parts, very good condition

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- Kohler 30 HP gasoline engine with electric start and including battery and fuel tank -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls, fixed and movable laser light.

Miner B-53 STATIONARY Board Edger -- Welded steel frame constructed with 6 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 14"; diameter split carbide saw -- 30 HP electric motor mounted on edger -- 480 volt magnetic motor starter -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls -- Laser lights aligned with each saw

Miner Edger 2 saw Laser lghts Good condition

Miner 3-31 STATIONARY Board Edger -- Welded steel frame constructed with 8 inch channel and including legs -- Working height may be determined by buyer, standard is 36" -- Overall length of frame is 16 feet, bay is 31"; wide, maximum board width is 24"; -- Two Live bottom feed rolls and two overhead gravity pressure rolls -- One stationary saw collar and one hand lever shifting saw collar, each with a 12"; diameter carbide saw -- 30 HP electric motor with 480 volt 3 phase magnetic starter included -- Belt drive with belt guard -- Infeed and outfeed tables with dead rolls

Miner 4” Edger

MINNESOTA 24-8 Multi-Spindle Carving Machine.Specifications: -- Spindles/Capacity: (24) Spindles, 8" between centers & 72" length capacity. -- Motors: (12) 0.75 HP motors with (1) motor driving (2) spindles via flat belt. -- Features: Manual table elevation, motorized stock rotation, non-indexable head. -- Comes with: (2) Sets of carving tools (one medium and one fine). -- Includes: Tables for flat carving - to be confirmed (?).