Equipment For Sale

2011 Morbark 6600 Wood Hog Horzontal Grinder, 8461 frame hours, New Cat C32 1200hp engine 1000 hours ago, New C32 was installed at 7500 hours, PT tech hydraulic clutch, Magnetic head pulley, Radio remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Morbark Model 1200WCL Tub Grinder, Caterpillar 3412 Engine, hours unknown, Joystick Controls, Square Wear Plates, Enclosed Cab with Heat, Clutch replaced recently, 4" Screen and 2" Round Secondary Screens. Length 36 ft 0 in Width 11 ft 11 in Height 13 ft 6 in Weight 50,020 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Morbark Typhoon 20 Drum Chipper, John Deere 325hp with 5,000 hours, Winch, Hydraulic Jack, Hydraulic Turn Discharge. Weight: 4,500 LBS Length: 18' Width: 8' Height: 8'6” Weight: 9,000 Lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2016 Morbark 4600XL Horzontal Track Grinder, Cat C27 with 7,500 hours, Magnetic Head Pulley, Radio Remote. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark chip blower, approx 36" dia, electric drive, comes with single loading pipe, excellent condition

Morbark 58" 3K Chipper w/150Hp 1725 RPM Motor

Mobark Rosserhead Debarker Model 636 Currently in use

Morbark 3 knife 48" chipper. Powered by 50 HP 3 phase electric motor. Belly band was replaced 5 years ago. Taken out of production in mid July 2023. Does not have sheaves. Auxilliary chip blower mounted on a pipe. Straight pipe is 12" across, 17.5' long. Has a Phelps blower with 15 h.p. 3 phase motor, mounts on the chipper. Call 800-459-2148 for more info.

2012 Morbark 3800XL Caterpillar C18 – 700hp 5807 machine hours. Recent rebuild on the Cat engine. New mill components.

1997 Morbark Model 16 Whole Tree Chipper, Enclosed Cab with Heat, No AC, Single Axle with (4) Tires, New Tires and Brakes, Cummins 250 HP Diesel Engine with 2200 Hours, Nice Running Machine Perfect for Clearing Lots Weight 8,500 lb Height 8.8 Width 7.1 Length 17.11 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark 58" 6 Knife Chip Pack

Rosserhead Debarker Model 642/648 Good condition. Runs well. Original safety manual included. Call 800-459-2148 for more info.

2007 Morbark Model 23 WCL Whole Tree Chipper, Caterpillar 3412 1000 HP Twin Turbo Engine. Has 9,000 Original Hours, Heat and Ac, AC needs a Charge, New Computer, New Injectors, All Cylinders recently Repacked, All New Hoses, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Morbark 40/36 Drum Chipper -1500 hours -C-18 CAT -Deleted -Clean Unit

75 Hp. Ford Diesel, 1548 Hr. 14" chipper mouth. Road ready with pimple hitch. Runs and operates like New. Call for more info 607-967-7569

2016 Morbark 6600 Track Horzontal Grinder, Cat C32 1200 hp with 10,022 hours, Radio Remote, Magnetic Head Pulley. Work done. 5/23 fan pump replaced $8000 6/22 poclain feedwheel motor replaced. $20,000 4/24 Fan bearing replaced. $2000 5/24 yoke cylinders rebuilt. $500 5/24 new belly belt and all new parts associated with except the pulley drum. Shaft, b-locs and bearings replaced. Also metal siding and skirt. $8-10,000 6/24 2 new turbos. $12,000 6/24 new fan motor and side load adapter. $6500 6/24 feedwheel bearing replaced. Possibly shaft. $1500 6/24 discharge bottom bearings replaced Work done to infeed floor. Belly belt motor rebuilt. 3 injectors have been replaced. 2 out of 3 wiring harnesses replaced. Rebuilt fan motor. Has newer grates. (2) 8” hex. (2) 7x16 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Morbark Typhoon 20 Chipper, Autofeed System, Lift Assist Twin Disc Clutch, Hydraulic Tonge Jack, Pintle Hith, Tandem 8,000# Axle's with Brakes, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Morbark 30/36 Mountain Goat Track Whole Tree Chipper Caterpillar C-15 Engine 4,145 Hours, Auto Clutch Undercarriage 85% To 90%, Enclosed Cab with Heat and Air Conditioner, 1200 Log Grapple, Ready for the Woods. Length 31'6" Height 12'5.5" Width 8'5.25" Gross Weight 44,760 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Morbark Stac Trac. In running condition. Call 800-459-2148 for more info.

Pintle Hitch 4800 Hours Year To Be Confirmed