Equipment For Sale

2013 Volvo L70G Wheel Loader with Forks S/N VCE0L70GL08614024 18491 Hrs.

#201 • Volvo L70C Wheel Loader Serial #: L70CV14857. Model: L70C. Meter Reads: 24,120 hrs. Engine: Volvo Diesel. Fuel: Diesel. Tire Size: 20.5R25. 3rd Valve: no. Attachment: none. ROPS: Closed. Center to Center of Pins: 39 1/2" x 24". Lift Capacity: NA. Air Conditioner: no. Heat: no. Features and Notes: Glass is missing in cab, power quick attach has small leak when using, runs and operates.

Volvo L-90C wheel loader, 20,567 hrs., includes log clamp attachment, has quick-attach, working condition

1996 Volvo Autocar 3406e 8ll -Good tires -Rotobec 80 elite picker with Heiden log grapple -Also comes with a Heiden debris grapple only used 1 year. -Has brand new hardened double frame from cab back -Shocks and all bushings was changed at time of new frame -Starts and runs daily

AIR SUSPENSION SEAT AM FM CD RADIO AM FM RADIO AUTO LUBE AUTO TRACTION CONTROL BEACON BED, STANDARD CYCLE COUNTER DIFF LOCK/UNLOC EJECTOR ENGINE BRAKE EROPS LIGHTING REAR VIEW CAMERA TAILGATE ULTRA LOW SULFUR DIESEL FUEL

Less than 400 hours! This includes the hydraulic bucket from Volvo.

Air Conditioner Auxiliary Hydraulics - 4th Valve Boom, GP Combined Hydraulics - One Way Counterweight Coupler - Quick Coupler Type - Hydraulic Differential Lock Differential Type - No Slip Emissions Level Engine Enclosures Grapple Lighting Mirrors Radio - AM FM Radio Regulatory Marking Regulatory Status ROPS - Enclosed Steering Type - Wheel Tier 1 Compliant Tier 2 Compliant Ultra Low Sulfur Diesel Fuel Vital Information Management System (VIMS)

Volvo loader buckets, In good condition. Your Choice buy one buy both the price is by the piece. Write Riverside Hardwoods 663 McAtee Rd. Cadiz, KY. 42211 Call 270 498 8454

2019 Volvo L150H Wheel Loader with 12,655 hours, on a diesel engine. Good condition, all glass and mirrors intact, minimal rust. 26.5R25 Bridgestone Tires with life left. Heat and A/C. Weight 56,440 lbs Length 28.91ft in Width 9.72ft in Height 11.75ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Static tipping load at full turn 22,265 lbsBucket capacity 2.9 - 9.2 yd³Log grapples 1.6 - 2.9 yd²Operating weight 31,968 - 38,140 lbsBreakout force 31,470 lbfEngine Volvo D6JMax power at 1,400 - 1,900 rpm...ISO 14396 gross 184 hp...ISO 9249, SAE J1349 net 184 hpMax torque at 1,400 rpm...ISO 14396 gross 689 lbf ft...ISO 9249, SAE J1349 net 689 lbf ftTires 20.5R25 600/65R25

1999 Volvo A25 Swivel dump truck with new rebuilt motor. Located in Tazewell, VA Contact Zach for more information. 931-224-0699

2022 Volvo EC250E LR -485 hours -60 ft long reach -60” cleanout bucket -Has both rear & side view cameras -Fresh 500 hour service -Extended Premier Warranty

Emissions Level Lighting Regulatory Marking Regulatory Status ROPS - Open Tier 1 Compliant Tier 2 Compliant Ultra Low Sulfur Diesel Fuel Water Spray System

MLS Number 12700853 2017 Volvo DD120B Smooth Drum Roller Compactor 700 hours

Vonnegut M9 4 Head Planer/Moulder Serial# 8364, 8" Wide Planer Heads

VOORWOOD "A 515 GH" Arch Door Sander with Floating Head ARCH SANDER with: (4) 1.5 HP Motors for precision sanding; quality sanding using Disc sanding at continuous feed. Equipped with: -- (4) Floating Sanding Stations equipped with: 1.5 HP Precision balanced drive motors and quick change spindles. -- Infeed & outfeed (1st and last) spindles equipped with: Double collets and angular, horizontal & vertical adjustments with accurate and repeatable digital readouts. -- PLC Control with: Monitor at eye level height.Feedthrough Arch Machine capable of sanding arch profiles on cabinet door components, plus can do straight cuts.. .

VOORWOOD M 15A CNC Round End Tenoner & Mortiser for 45° Door --The "M15A" Miter Machine is designed to rapidly make mortise and tenon cuts at 0°, 45° Only, . Parts can be up to 1.5"; thick and up to 4"; wide, and of ANY length. --A primary application for this machine is for miter cabinet door frames. Parts can be quickly transferred from left to right. They are mortised on the left side of the machine and tenoned on the right. The machine can also mill the slots. --Specifications & Equipped with: -- The mortise station has (3) servo-controlled axes (X, Y, and Z) that are coordinated by the machine controller to achieve complex CNC motion. It is equipped with a collet-style router spindle for cutting. The tenon station uses the same X- and Y-servo-controlled axes as the mortise station and is configured for pneumatically actuated in-and-out movement along the Z-axis. The tenon station is equipped with a direct drive shaper spindle for cutting. -- -- Pneumatic clamping assemblies with non-marring urethane pads are mounted to the hold-down assembly to secure the parts during cutting and these can be adjusted to various locations over the cutting surface. -- -- M15 Miter Machine operator interface consists of a colored touch screen. For simplicity, the entire calibration, setup, and monitoring of the machine are accomplished using only four touchscreen displays. The program designs the depth and location of both the mortise and the tenon. When the design is complete, it is saved in a recipe format. Once this recipe is opened, the operation is as simple and boils down to feeding the substrate into the machine. -- -- The full-color touchscreen panel is located on the front of the machine to provide easy access for setting up or operating the machine. Clamping and shaping operations are controlled by operating lighted pushbutton switches.