Equipment For Sale

2001 Retech 620 Prospector -3800 hours -Screened dirt -Tight and dry -Belts good -Tires good Ready to work!!!!!

1999 Re-Tech IS4820 Trommel Screen, 10,134 hours, 1/2 screens. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

RETHPAK - HC-2020: Form-Fill and Seal Bagging LineComplete Form-Fill and Seal COMPRESSION Bagging System Specifications -- Model "HC-2020" Form-Fill & Seal Compression Bagger. -- Up to (7) bags per minute. -- Bag Size: 12" x 18" x Up to 32" long. -- 60" Max. film width. -- Optional film cart included. -- Cyclone & stand. -- Walking floor Trailer with: Blue Auger conveyor. -- Control Panel: MCC. -- Hydraulic Tank. -- Tires for walking Floor Trailer. -- Blue piping & stands. -- Transfer auger Conveyor and Surge Bin. -- Auger from Surge Bin to Bagger. -- Transfer Belt. -- Stacking Unit & outfeed roll case. -- Roll lifting device. -- Shrink Wrapper.Decommissioned & all associated wiring removed by Contractor.

Features - Easy to use main controls - Quick access for changing 3 or 5 inch wide rolls of film or adjusting film stretch - Vigor PLC for reliable operation

Used 64’+ Vibrating conveyor 64 foot natural frequency conveyor 3ft width vibrating conveyor Approximat total shipping weight 14,000 lbs Prior use of the conveyor was inside of a building Additional photos and details are available Contact us for a price and shipping rate.

Used Timbco and Valmet track feller buncher track drive pumps available in stock

Rexroth swing motors and gear boxes available to fit Timbco, Valmet and Komatsu Track feller bunchers

Rexworks Maxigrind 425 Portable Horizontal Grinder w/Cat Engine, Tandem Axle 5th Wheel Trailer

(2) Rigma Roll Coaters available Model RR-W4CCB 1350 Max capacity

RILESA UNI-X 2200 FEED THUR CNC BORING MACHINE W/4-SIDE DRILLING, in one pass. -- Specifications:Working Capacity; 230 mm - 2,200 mm (9' - 86.6") Length, 20 mm - 250 mm ((0.78" - 9.84" width, 10 mm - 60 mm (0.39" - 2.36") thickness.Capacity: up to 900 parts/hour without cross drilling. -- Features:One-man operated. 4-side drilling, in one pass. With Rilesa UNI-X drilling machine you get precision, quality and extreme high capacity. It is well suited to both small and large dimensions. It has short set up time and minimal maintenance. -- Polyurethane an guides ensure gentle handling of components. The restraining clamp automatically adjust to component width ensuring correct location to the zero point. -- The drilling boxes are designed for high speed drilling, 4500 RPM. The tool inserts can be chosen Between direct or snap assembly. Special drill boxes can be manufactured to specific customer requirements. -- Assembly of drill boxes takes place with a snap function and is simply locked with screw. The drill box can be freely turned between 0 and 90°. In the outer positions there are stops. -- The drill groups unique design gives a high degree of adjustment flexibility. The center distance between groups is 95 mm. Pneumatic over hydraulic drill feed. Drill speed, 4000 RPM. -- The components are fed in pneumatically up to the reference stop and locked securely in this position. A unique safe regulated system makes sure the component is in place without pressmark. -- The operator uses signal lamps to make adjustments. The operator manually moves the drill groups into position checking the lights. Yellow to green = Tolerance. -- The machine closed design with built in dust extraction gives the perfect place to work. Notice the sturdy construction of the machine body. -- Loading of components is very easy by pushing the stack in through the brushes. The machine components are transported gently back to the operator. The conveyer can run continuously or in step mode. -- For long components support elements can easily be added. They are located with a simple clamp and ensure straightening of the workpiece. -- The machine can be delivered with sideways displacement of the drilling group. The drilling group displace up to 100 mm, this function combined with programming of the drilling, do difficult drilling in one passage, possible. -- The control system is integrated in the back of the machine, well protected against dust. There is room for future expansions to be added. -- Hopper / Magazine:Pneumatic magazine with ergonomics and user friendly access. Automatic fixation to the zero point by a pneumatic counter clamp with polyurethane and nylon covering for careful handling of the component. -- Return conveyor with an adjustable catcher tray, build-in clamp cylinder mounted at each end, for flexible and safe clamping of the components, adjustable catcher tray. -- Operator Interface:Advanced 15"; color TFT touch screen control system where

LOCATED IN BOONVILLE, NY

2011 Risley EX300 Forestry Mulcher with 3,889 hours. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc

Risley Cobra

2006 RISLEY ECLIPSE EZ2200 TRACKED SAWHEAD CAT 3126 NEW UNDER CARRIAGE QAUDCO HEAD

RITTER R-30RP Raised Panel Door Shaper(3) Shaper Spindles mounted in a precision ground worktable (68" X 52" Deep X 36" Working Height ) Designed for running raised panels, as well as style & rail material for raised panel doors. -- Preset Spindle Locations, Equipped with (2) 5 H.P. Spindle Drive Motors On Right And Left Spindles, and (1) 7.5 H.P. Spindle Drive Motor At Center Spindle. -- The 1-1/4" Diameter Variable Speed Spindles are driven with Micro-V Belts. 5-1/2" max. cutter dia. -- 1st Spindle: 2" high x 12" wide max. tenon. 2nd Spindle: Setup for shaping of raised panels. 3rd Spindle: Setup for machining of style & rail and outside lip of door. -- Complete with: Micro Adjusting Fences, Miter Gage Slot at Right Hand Spindle (3/4" W X 3/8" Deep), Dust hoods (3 - 4" Connections), and Door Interlock Safety Switches.Suggested Options -- H154: PANELCRAFTER 24" Capacity Panel Jig, with 2 Cylinders. -- Jigs float on a cushion of air for smooth, easy operation. Proven design for years of trouble free use. Single thumb lever activates floating and clamping cylinders. Use with material thickness up to 2" thick. Self centering mechanism, and Variable flotation regulation. Large hand grips help operator control work piece. Change door style by simply changing the templates using a wide range of template designs and sizes. This Option requires 2 CFM at 80-100 PSI of supplied air.- R10TESA: Coping Attachment -- Fits any 3/4" by 3/8" deep slot, 2" X 12" capacity, with (3) Adjustable hold down clamps.- H161: Power Material Feeder, with reversing. -- (3) 20mm Rubber Rollers, 1HP Motor, 8 Adjustable Speeds (6,13,18,21,36,42,54,102 FPM)

RITTER R-200 E/A Face Frame Assembly Easel Dimensions 5' x 12' with 45° Bed angle;Specifications: -- Hold-down beam with (5) adjustable hold down cylinders. -- Squaring bars on left, right and bottom sides. -- 1" Thick laminated surfaced table. -- Heavy duty steel frame. -- (1) Coil-hose for pneumatic screw gun (screw gun not included). -- Air pressure required 100 PSI. -- Footprint: 165"l x 48" D.Shipping dimensions: 68" x 169" x 30" H. Shipping weight 1,250 Lbs.NOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

RITTER - Face Frame Assembly EaselDimensions 5' x 8' -- Bed angle 45° --Hold-down beam with: (3) Adjustable hold-down cylinders. -- Squaring bars on left, right, and bottom sides. -- 1" Thick laminated surfaced table. -- Heavy Duty steel frame. -- (1) Coil hose for pneumatic screw gun (screw gun not included); 100 PSI air pressure required. Shipping dimension: 68" x 120" x 30" HShipping weight: 1,716 LbsNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. - PRICING SUBJECT TO CONFIRMATION.

RITTER R-300 V Door and Panel Clamp6' x 12' Assembly Easel - VerticalStandard Features: -- (10) Universal Clamping Cylinders and Cylinder Manifold. -- Foot Treadle operated. -- (4) Material Hold-Down Dogs. -- (3) Adjustable Material Positioning Stops. -- (2) Squaring Bars on Left and Right Sides. -- 2" Cylinder Position Grid Pattern. -- 3" Bore Clamp Cylinder Housing. -- Perforated Steel Table. -- (12) Port Manifold with 1/4" NPT Regulator/Gage. -- Adjustable pressure from 20 to 130 PSIShipping Dimensions: 151" L x 77" W x 30" HShipping Weight: 1,643 LBSNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.

RITTER R-250 E/A Face Frame & Cabinet Door Clamp6' x 12' Framemaster Face Frame Frame and Door Assembly EaselIncludes: -- 6’x12′ Face Frame and Door Assembly Table. -- (5) Cylinder Clamp Arm. -- (10) Universal Clamp Cylinders & Manifold. -- Foot Treadle. -- (4) Material Hold-down Dog. -- (3) Adjustable Material Positioning StopsNOT IN STOCK - CALL OR EMAIL FOR CURRENT LEAD TIME TO SHIP. PRICING SUBJECT TO CONFIRMATION.