Equipment For Sale

1968 Taylor Cable Skidder 453 Detroit New Front Tires, 90% Rears Bear Claw Chains Front and Rear At 75% Runs and Operates Good

Taylor Forklift, runs & works good

TAYLOR - 16-Section: Hydraulic Automatic Clamp Carrier8-1/2 Feet capacity; (16) sections. -- (6) Clamps per section, but sold with (96) clamps total; 32" max. opening; 2-1/2" high jaws. -- Heavy dual Hydraulic Drive for automatic rotation. -- Automatic pneumatic panel flattening & hydraulic clamp tightening. -- Operator applies: Glue to the stock; loads parts for clamping & then unloads. - The rest is automatic.Tightening assembly with: Panel flatteners automatically advances to each clamp; flattens the panel & tightens the clamp; moves on to the next clamp. -- Operator. controls: Start & Finish. NOTE: Machine originally with (28) sections; reduced to (16) section. There are approx. (70) additional Clamps available.Machine already torn down; ready to ship!

2016 Taylor TN520S Pneumatic Tire Forklift with 12,794 hours on a diesel engine. Overhead Guard, and enclosed cab. Fork Length 60" Lowered Ht. 164", Max Ht. 106". Tires have 90% tread remaining. Small leak @ oil pan gasket and Hydraulic pump seal. Weight 74,400 lb Length 22 ft. Width 10.9 ft. Height 12.2 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

TAYLOR - 6-Section: Pneumatic Clamp Carrier6-Section x 10-1/2' width cap.; (36) total clamps; 30" opening on clamps; 3-1/2" high jaws; includes: Pneumatic rotation; tightening; panel flattening. -- Overall assembled dimensions: 9-1/2' Deep x 13-1/2' wide x 9' tall.NOTE: Teardown not included.

TB Woods 150HP Soft Start

1760 RPM, TEFC

10 HP 575 volt unit. Has between 25-27 CFM. RPM: 1745

Tregarne Wood Welder New in Box

TEREX 256 Off road truck Runs good Needs brake work

2014 Terex TBG 640 Horzontal Grinder with 210 original hours. NEEDS ENGINE it was a Cat C18. The mill takes Morbark 1300 hammers and tips, pumps are there, 210 original hours on the machine. Weight 82,000 lbs Length 43' Width 8' 3" Height 13' 3" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

175 hp, Cummins, 6 cylinder,diesel, 9' bucket, 20.5 R25 tires

C18 Cat 765HP, New valve banks.  Remote control FOB CANADA - FOR DELIVERY OPTIONS CALL

DEUTZ TD 2.9 L04 (60HP) LARGE CAPACITY BIOMASS HOPPER 78'9" DRUM CENTRES GIVING A MAX STOCKPILE HEIGHT OF 34'6" AT 25 DEGREES 42" WIDE 3 PLY BELT HYDRAULIC FEED HEIGHT ADJUSTMENT HYDRAULIC FOLD FOR TRANSPORT CRAWLER TRACKS WITH PENDANT CONTROL SYSTEM 2 SPEED TRACKING LOW LEVEL GREASING

CAT C4.4 TIER4F DIESEL ENGINE (110HP) 5' X 16' SCREEN 3.3 CU YD HOPPER CAPACITY RADIAL CONVEYOR W/180 DEGREE SWING AND VARIABLE DISCHARGE HEIGHT 39,700 LB OPERATING WEIGHT DOUBLE-AXLE, MECHANICAL SUSPENSION LOW LEVEL REMOTE GREASING TEREX COMPLETE 1 YEAR/2000 HOUR WARRANTY CAT 2 YEAR/3000 HOUR STANDARD WARR

2014 Terex Phoenix 3300 trommel -8900 hours -Rebuilt engine and new main pump -Belts are in good shape -Has self-cleaning tail pulleys -New fluids Everything works as it should !!!

2021 Terex M1700-3 Deck Wash Plant -1600hours -CAT engine -Currently set up as a dry screen -Does have all the components to covert to a Wash Plant -Spray Bars, Slurry Box and Tipping Grid etc