BioMass Equipment For Sale

2004 Peterson Pacific 4700 Horizontal Grinder, Equipped with a Caterpillar 3410 860 HP Diesel Engine with 9000 Hours, Wireless Control, Rebuilt Infeed Chains, and Bearings on Mill, All New Teeth, New Backing Plates on the Mill, 5" Screens and New 1-1/2" Screens, Ready for Work. Machine Weight 62,500 to 67,000 lbs Travel Length 39'-8¾" Travel Width 9'-9½" Travel Height 12'-3½" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Peterson 5000H Chipper -9500 frame hours -Complete Cat rebuild done at 6800 hours -4 flail -Loader -Tons of service receipts and very clean machine Videos upon request

2006 Peterson 4710B Tracked -6720 chassis hours -Remanufactured engine installed on machine as the old clutch destroyed the engine -Done by CAT dealer in NC (GregoryPoole) -Reman engine 530hrs -New clutch installed the same time as reman engine installed -Feeder floor 30-40% life left -Rotor balance is good -New main conveyor belt just installed -New main conveyor head motor installed -New skirting guard deflectors installed under rotor -New set of screens in machine I think they are 3" -New clutch module and harness -New Iqan electrical panel upgrade system installed by Peterson rep -C18 T3 caterpillar 755HP -Twin disc clutch Ready to work

2019 Peterson Pacific 2710D Track Horizontal Grinder, Caterpillar C-18 765 HP, Frame Hours 4,500.00, Caterpillar put in a new engine around 3,500 Hours, Dropped a Ring in the Engine, Has Platinum Engine Rebuilt, Undercarriage is 95%, Wireless Remote Control, Air Compressor, Ready for Work. Machine Weight: Approx. 68,100 lbs Width: 8' 2" Length: 40' 8" Height:11' 1" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2008 Peterson 5900 Tree Chipper -10560 hours -4000 on complete rebuild -Works as it should -Tires good -Two boxes of key knives

1999 Peterson Pacific 5000G Chipper -1000 h.p. 3412e engine -8000 hrs since major overhaul -3 flail -Spare flail pump -Load adapters replaced within last 1000 hours -Fan pump replaced 1500 hrs ago,Also has had swing and boom pump replaced -New Ecm has less than 750 hrs -New muffler -New feed roll teeth -New heater and a/c -Spare clutch, Spare belts, Spare pins and Seal kits -Babbit or key knife system -Fleet maintained

1998 PETERSON PACIFIC 2400A WOOD GRINDER CAT 3406C ENGINE GOOD MILL GOOD FEED CHAINS LOTS OF NEW PARTS RUNS VERY WELL WORK READY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTH DEFERRED PAYMENTS WITH GOOD CREDIT IN-HOUSE FINANCING FOR MOST CREDIT TYPES GRANITEHE.COM

Monitor shows 5853 hours, runs well, ready to work

2002 Peterson 7400a Horizontal Grinder -End of summer 2022 we installed NEW -Cylinder packs and bearings -Both turbos -High pressure oil pump -Ecm -Injectors -All gaskets and orings -Oil pump -Twin disk clutch -Had the heads completely rebuilt -Radiator completely gone through -Rebuilt feed floor -Rebuilt mill -Mill bearings checked for clearance and passed -All belts and chains in good shape -Alot of extra screens and parts come with it. Some are brand new

Cat 3306 with recent engine work  (new head, liners etc) Remote control No stabilizers

New remote All outriggers intact and work. Two lower green wear plates worn but being replaced New radiator screen (pictured) will be installed.

Remote control

Peterson 4800 Flail Debarker Wireless remote controlled Reman engine Runs and operates good

2019 Peterson 2710D Grinder -4550 hours -C18 CAT Engine764 HP -Motor replaced at 3500 Hours by CAT with Papers -Clean machine ready to work

This has sustained an engine fire which was contained in the engine compartment. Engine is not recoverable. This machine would be a great candidate for a Rebuild or an ideal Electric Conversation. A last resort would be to part out the machine.

JUST REBUILT - CALL FOR DETAILS UNIT SUSTAINED FIRE DAMAGE, ENGINE WAS UNSCATHED, PROMTED COMPLETE REBUILD OF REST OF MACHINE. CAT C27 ORIGINAL HOURS - 1050 HP - TIER 3 NO DEF TOO MANY NEW PARTS TO NAME NEW PT CLUTCH, PUMPS (ALL), WIRING HARNESS, DRAG CHAIN, FEED BED, ALL HOSES, FEED DRUM, COMPRESSOR AND MORE.

This machine is 100% redone. Completly rebuilt motor, new pumps, hoses, wiring harness. New knives and infeed chain

Complete Player Design Drying System - (2) Touch Screen Controllers - (1) PLC Control Box - (1) 12’ X 20’ Burner – 25 million BTU capacity with tempered sight glass that can run green chips/dust - (1) Burner Auger , Gearbox, and Motor - (1) Burner Blower Fan Assembly and Motor - (1) Player Single Pass Insulated Dryer Drum (12x50), 8” T section track, 28” Trunnions, Drive lubrication system, Sprocket, Chain and Gearbox / Motor (Drum rated for output material volume of 16,000 lbs per hour) - (1) Air Pro 48” Overhung Fan Assembly (ID Fan) (No Motor) ---- (Part# 12113601, Type-IERS615, Serial# 21136,) - (1) 200 HP motor for ID Fan - (1) Beck- Damper Adjustment Arm/Gearbox (ID fan comes with opposed blade inlet damper with a 300 ft-lb Beck actuator and armature) ---- (Model 11-209-155212-04-01---- 120V 1PH / 110VA ) - Piping and dampers for piping - Missing approximately 20’ of Dryer Drum Discharge piping - Missing approximately 20’ of Dryer Drum Recycle piping - System was rated at approx 9.25 Tons/hour

Portage & Main Outdoor Wood Stove W/ Wood Chip Feeder

2021 Powerscreen Chieftain 1400 -1900 hours -2 deck vibratory box -Up to 400 tph -54,895lbs whole system -Tier 4 engine (110H.P) -3 Conveyors Main,Tail(fine),Side(midsize/oversize) -Belts in good shape -Clean ready to work unit