BioMass Equipment For Sale

CAT C27 ORIGINAL HOURS - 1050 HP - TIER 3 NO DEF TOO MANY NEW PARTS TO NAME REBUILT TROUGH, NEW PT CLUTCH, NEW PUMPS (ALL), NEW WIRING HARNESS, NEW DRAG CHAIN, FEED BED, ALL HOSES, GRATES, COMPRESSOR AND MORE.

2011 Peterson Pacific Horizontal Grinder Power Source: Diesel Engine Mfr: Cat Engine Model: C27 Horsepower: 1000 Has approximate 9050 hours

2017 Peterson Pacific 4300 Whole Tree Chipper, Micro Chipper, New Rebuilt Cat C-18 Engine, 785 HP, Under 50 Hours, Frame Hours 10,500 Hours, Air Compressor on the machine, Ready to Chip Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 13289474 1997 Phelps Industries AX270MAB63 Dumper With hopper and belt conveyor 9' x 65' platform Used until April 2024 Includes a spare belt for conveyor Spare rebuilt lift cylinder Manual, prints and all maintenance records available Buyer responsible for rigging and loading.

Complete Player Design Drying System - (2) Touch Screen Controllers - (1) PLC Control Box - (1) 12’ X 20’ Burner – 25 million BTU capacity with tempered sight glass that can run green chips/dust - (1) Burner Auger , Gearbox, and Motor - (1) Burner Blower Fan Assembly and Motor - (1) Player Single Pass Insulated Dryer Drum (12x50), 8” T section track, 28” Trunnions, Drive lubrication system, Sprocket, Chain and Gearbox / Motor (Drum rated for output material volume of 16,000 lbs per hour) - (1) Air Pro 48” Overhung Fan Assembly (ID Fan) (No Motor) ---- (Part# 12113601, Type-IERS615, Serial# 21136,) - (1) 200 HP motor for ID Fan - (1) Beck- Damper Adjustment Arm/Gearbox (ID fan comes with opposed blade inlet damper with a 300 ft-lb Beck actuator and armature) ---- (Model 11-209-155212-04-01---- 120V 1PH / 110VA ) - Piping and dampers for piping - Missing approximately 20’ of Dryer Drum Discharge piping - Missing approximately 20’ of Dryer Drum Recycle piping - System was rated at approx 9.25 Tons/hour

Portage & Main Outdoor Wood Stove W/ Wood Chip Feeder

2001 Powerscreen 725 Trommel Screen, Equipped with Remaned Deutz 100 HP Turbo Diesel, 1000 Hours, Used 1/2" Screen Cloth, New Sticky Belts, All New Brushes, New Tires, All New Radial Stacker Motor, Ready for Work. Weight 55,116 lb Transport length 638" Transport width 108" Transport height 158" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Powerscreen Chieftain 1400 -1900 hours -2 deck vibratory box -Up to 400 tph -54,895lbs whole system -Tier 4 engine (110H.P) -3 Conveyors Main,Tail(fine),Side(midsize/oversize) -Belts in good shape -Clean ready to work unit

2019 Powerscreen Warrior 1800 -735 hours -2 Deck -Belts good -UC is good -No leaks

1991 Powerscreen Trommel Screen, 1/2 screens. Powerscreen’s industry leading trommel screens are extremely efficient in separating soil, compost, waste, aggregates, C&D, wood chips, and other materials. The rotating drum allows for tumbling for optimal separation of difficult material along with aeration. Easy drum changes, radial stacking conveyors, rugged components, and support from Powerscreen’s experienced service network make these trommels a versatile and reliable solution. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

The seller has confirmed that this 96" Precision chipper is in good working/running condition and is ready to load. This was not heavily run. This came out of a chip plant in WA. Model 96.27 - Horizontal feed - Side discharge - 4-Knife whole log chipper - 8" thick chipper dissc - Built in disc brake - Extended front shaft for hydraulic starter - Hydraulic starting motor - Side discharge pipe with motorized outlet adjustment - 27" maximum log diameter - Many spare parts and knives included - Average production rate: 125 tons per hour - No hydraulic pump - No motor - an 800HP one can be added for additional cost though... The photo's show the optional extended shaft and hydraulic starting motor which is a special feature....

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

Precision 58" Chipper - Model 58-60-16 6 Knife 150 HP Motor

2001 PRECISION HUSKY PROGRIND 1000 TUB GRINDER REDUCED 275 HP New Fixed Teeth New Auger Motors Good Tires Runs Well

1996 Precision Whole Tree Chipper 21" Capacity 700 HP Cummins KTA Twin Turbo Needs Clutch AC Heat Good Feed Rollers Disc Wheel Completely Rebuilt New Anvil New Wire Plate Husky 235 Loader 52" Rotobec Grapple PRICE REDUCED

Precision Husky 23 Chipper Needs engine Has Cummins KT19 650HP

PREMIER TECH VP-415 High-Speed Four-Station Compression BaggerFinished Bag/Bale Dimensions 16" wide x 9" deep x adjustable lengthSpecifications: -- Speed: up to 6.5 bales per minute -- Bulk materials: fibrous, flake -- Bag types: gusseted flat bottom bale, tubular film ÷ ÷Bag materials: polyethylene with anti-static treatment -- Bag weight: from 5 to 50 kg (11 to 110 Lbs) -- Typical footprint: 319"; L x 254"; W x 204 to 242"; H (8100 x 6450 mm x 5180 to 6147mm) -- Bag film thickness: 3.5 to 8 mils (90 μm to 200 μm) -- Empty bale dimensions: 12 to 39" L x 14 to 18.5" W (305 to 990 x 355 to 470 mm) -- Compression ratio: 5 : 1

Premier Tech Stretch Hooder / Pallet Wrapping SystemRobust load securing --Creates highly stable pallets --Handles all types of loads --Suited for high-speed production lines --Requires minimal maintenance --Hoods up to 100 loads per hourLate model 2020Includes Conveyors and electrical cabinets

Premier Tech Palletizing Cell with Fonic RobotThe automated palletizer combines two performance technologies to create high-quality pallet loads: the speed and reliability of standard Premier Tech conventional machines with the flexibility of robotic equipment. --This low-maintenance palletizer is specifically engineered for powdery, granular, or bagged products requiring overlapping, squaring, or compressing.Speed: up to 24 units per minuteApplications: bags and bundles

Premier Tech EM600 4-Stage Bagger Bag Sealer Bag Placer Hydraulic Unit Infeed auger