BioMass Equipment For Sale

Vermeer HG6000 3/4" Square Baffel Screen Only had half a truck load ran through it

2006 Vermeer HG6000 Horizontal Wood Grinder CAT C16, 630 Hp engine Approx 6300 hours PT Tech clutch; Magnet; Remote 1 1/4", 3" & 6" screens Regular maintenance Work ready

Vermeer HG365 Grinder New infeed roll and remote control Ready to go to work!

2013 Vermeer HG6000 -6000 hours -CAT C-18 engine -New material output belt that comes with it -Tires and lights good

2006 Vermeer TG7000 2100 hours Work ready

VERVILLE VP424-S-CCW BAGGING SYSTEM4-Station Compression Bagging SystemSpecifications & Includes: -- High Tubes of 116" -- Bag Size 11" x17" up to 30" High -- Automatic Plastic Bag Sealer -- Oil Tank Heater and Modem -- Supplied with Transformer for your VoltageLoaded on your Truck

VERVILLE 6-SCREW HOLDING BINSpecifications: -- (6) Motorized 14-1/2" Diameter Bottom Screw -- (1) Motorized 14-1/2" Diameter Exit Screw -- 11 Feet Long -- 16 Feet Wide -- 18 Feet High -- 12 Feet High Support LegsDismantled and Loaded on Truck

VERVILLE VP300 3-Station Bagging SystemSpecifications: -- Main motor: 25 HP -- High of Tubes 116" -- Bag Size 11" x 17" x Up to 30" Finish HighNote: Bin and Infeed auger/conveyor is not included.

Verville VP300 Bagger

Verville VP400 Auto Bag Sealer Auto bag placer Tube size: 15.75" x 11.5" New air lines, contacts, sensors

Verville VP300 Bagger 116" Tubes 10"x16" Bag size 460 V/3ph Includes: Infeed auger

4 Station Bagger

VERVILLE 95-VP-438SE-CCW-35/125 - 4-Station Bagger complete Automatic Bag Placement and Bag SealerComplete line that was used for wood shavings only. The line is in operation at the time of this write-up.The Verville VP438-CCW is a four-station compression bagging system designed for high-efficiency bagging operations. It features high tubes of 125", automatic plastic bag sealing, and the ability to handle bag sizes ranging from 11" x 17" to 30" high. This system is often used in industries like biomass and packaging. It also includes features like an oil tank heater and a modem for remote monitoring.Bagging Capacity: -- It can handle bag sizes ranging from 11" x 17" to 30" high. -- Automatic Features: Includes an automatic plastic bag sealer for seamless operations. -- Height: The system features high tubes of 125 inches, making it suitable for large-scale bagging needs. Additional Features: -- Comes equipped with an oil tank heater and a modem for remote monitoring, ensuring smooth and efficient performance.Included with the system: -- The control box is mounted on the side of the auto-bagger with the Allen-Bradley Panel View 550 unit. --The main 4-section bagger is 125 " tall. --The main master control cabinet, -- The long 45° screw auger to feed from the bottom of the sifter to the top of the bagger, -- The Cousins HP2100 plastic wrapper with a turn table to wrap full skids. -- The master hydraulic tank & pump arrangement with all hoses. -- The full sealed bag auto discharge conveyor belt & turning roller conveyor. --The sifter with the canvas wrap cover. -- The screw conveyor that runs from under the outside dust collection system rotary airlock drops the “good"; wood chips down to the 45° screw with the “light dust going out thru the screw conveyor into an open dump trunk outside.Total HP 75Price Includes Loading on a Truck

Verville 4 Stage Bagging System. #C921 Located in WI.

Webb Dryer System

10x40 Triple Pass Drum Dryer Webb Dust Burner All piping and controls Cyclone Additional blower Airlock

Weima TH1500 Briquette Press

WEIMA ZM-40 Quad Shaft 4-Shaft ShredderEquipped with: -- Dual drive motors - (2) 30 HP Drive motors. -- Hopper opening measures 51" x 55.1" (1,300 x 1,400 mm); cutting chamber opening of 30" x 27.6" (762 x 700 mm). -- Rotor length of 30" (762 mm); Rotor speed 25 RPM; cutting disc 11" (280 mm) diameter. -- Complete with: -- Control Panel with soft start and 16' cable bundle. -- Note: "Quad Shaft" Shredders, unlike Dual Shaft Shredders, allow shredded material to be circulated through the cutting chamber until it is small enough to pass through the sizing screen. -- Machine weight: 5,500 Lbs.

WEIMA ZM-30 Quad Shaft 4-Shaft ShredderEquipped with: Model- ZM 30 S -- Unit was used to shred wire (6,000 – 8,000 lbs per hour) --20mm screen included 25 HP x 2 --480V- 3 phase --Cutting chamber is 19"; x 27"; Hopper is 33"; x 48"; --The ZM30S is a beefed up version of the ZM 30. Unit has the same size motors, shafts and cutters as the ZM 50 but with a shorter shaft length