Mobile Wood Chippers For Sale
Category
Wood Chippers - Mobile
128 Results Found
Call for Price
FARMI CH 100 F is designed as a robust and inexpensive disc chipper for landscaping to chip branches and small trees up to a diameter of 100 mm. The FARMI CH 100 F can be mounted onto a small tractor giving a compact chipping machine in gardens, parks, yards and road sides. Two knives and an anvil take care of chipping and feeding. CH 100 F chipper is available as a tractor PTO versions or as a hydraulic driven option.
1992 MORBARK 30RXL WHOLE TREE CHIPPER ENGINE 3412 860HP STARTS AND RUNS GOOD 3 KNIFE, GOOD PADDLES, GOOD FACE PLATE, FEED DECK CHAIN NEED WORK CHIPPER IS WORKING EVERYDAY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
2008 MORBARK TYPHOON 20 CHIPPER -400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back
Call for Price
Morbark 30-36 Portable Chipper 350HP Cummins Approx 4000 Hrs self Feeding Grapple Up to 18" Dia Material
2002 MORBARK 30RXL WHOLE TREE CHIPPER ENCLOSED CAB WITH HEAT AND AIR CAT V-12 MORLIFT 1000 BOOM READY TO GO
MORBARK 27RXL WHOLE TREE CHIPPER BAD MOTOR V-12 CAT LOTS OF NEW PARTS DISC SHAFT BEARINGS DECK CHAIN AND SPROCKETS JUST WENT THRU CHIPPER AND MOTOR THREW A ROD LOTS OF NEW PARTS JUST NEEDS MOTOR
2016 Morbark Beever M12D 1,237 Hours Auto Feed 89hp Power Solutions International (PSI) 3.0L gas motor TorqMax Feed Wheel Compression System Hydraulic Lift Yoke Cylinder 53" Folding Feed Table 18" x 12" Throat Capacity Fully serviced with new fluids, filters, tires, wheels, knives, battery and rain cap 360 Degree Rotating Adjustable Chute LED lights
1992 Morbark Model 27 Whole Tree Chipper Cat V12 800 HP Engine Currently in production PRICE REDUCED
1993 MORBARK 30/36 TREE CHIPPER HOURS ARE UN-KNOWN 325 CAT ENGINE REPLACE IN 2009 NEW BRAKES AND TIRES ALL HOSES REPLACED RECENTLY VALVE BANKS REBUILT ON BOARD AIR COMPRESSOR NEW BELTS AND CHAINS REW RADIATOR JOYSTICK CONTROL WORKS DAILY FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM
Call for Price
1994 Morbark 23 WCL Whole Tree Chipper Engine is a 3412, Seperator, Enclosed Fold Down Cab with Heat, 6 Sets of Knives and New Anvil, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
Call for Price
2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 249,500
Cat 3412E 860hp Engine status report shows 43% average load factor, 3317 idle hours. 8899 hours on original engine. Completely serviced and runs properly. Morlift 500 loader with tight grapple, A/C cab all nicely fitted. Auxiliary air compressor Michigan model 40 knife grinder Extra knives Very sound, tidy chipper throughout. Call for complete condition report.
Call for Price
2006 Morbark Hurricane 18 with 4,942 hours. 18" chipping capacity, Caterpillar 213 pre emission diesel, 1,593 hours on newer motor. Machine has full hydraulics- 360' rotation chute, (3) jacks and 5000 LB winch. New: blades , blade bolts , blade pockets, cutter bar, drum bearings, blade belts , feeder wheel chain, 150' winch line with dog bone, batteries, leaf springs, fluids, filters, paint, waiting on sticker kit from Morbark. Ready for work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.
$ 155,000
2009 Morbark 30/36 Tree Chipper -1045 Original hours -C13 440 HP -A/C blows cold -Clean tight chipper
$ 109,000
2019 Morbark 1821 Tracked Chipper, Cat 173HP Diesel, Winch, Remote. Excellent Running Machine.
$ 152,900
1994 Morbark 23WCL 23" disk chipper With loader Good condition Includes: extra (new and used) knives, counter knives, & top plate
-400 horsepower John Deere(rebuilt within the last five hundred hours) -new injectors and new injection pump new fuel pump -new head -new belts -hydraulic pumps -replaced all hydraulic valves -new brakes -all new fluids and filters -new paint chipper has remote control to that works -recently put on 12000 pound winch on back
$ 415,000
2021 Morbark 30/36 whole tree chipper -1884 hours -Cat Engine -Pintle hitch towed -Extra sets of knives and parts -Factory Engine warranty remaining PRICE REDUCED!!!!!!!
2008 MORBARK 30/36 TREE CHIPPER 5.100 HOURS GOOD DRUM JOHN DEERE ENGINE 500 HP GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM