logging Equipment For Sale

Arch - Dual Function Blade Emissions Level - EU - IV Emissions Level - Japan - STEP 4 FINAL Lighting Online Owner's Manual Product Link Radio - AM FM Radio Regulatory Marking Regulatory Status - CAT_NR_EPA/CARB_MLIT_EU_R120_China Export ROPS - Enclosed Ultra Low Sulfur Diesel Fuel Wheeled

2012 CAT 320D FM, 12,000 hrs., fitted with 2019 Ryan’s DS-3550 Dangle saw head with 2000hrs/ Good UC/ No leaks and tight, $110,000

Rotobec 4552HD grapple, 32" triple grouser pads, high rise cab, fully operational

SH56B saw, 30.5 tires

CTR 426, hydraulic crawler trailer, GLK55 grapple, fully serviced and ready to work.

CTR 426, hydraulic crawler trailer, GLK55 grapple, fully serviced and ready to work.

JUST IN CALL FOR STATUS Dual arch, winch, 30.5 tires

CTR 426, crawler trailer, GLK55 grapple, serviced and ready to work.

1993 Caterpillar 518C Grapple Skidder, 13000 hours, 30.5 x32 Tires at 90% Enclosed Cab with Heat, Center Section is Good, Good Chains New Belts and Batteries, Ready for the Woods. Operating Weight 26,510.6lb Overall Length 18.25in Overall Width 11 ft Height To Top Of Cab 9.55ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

RARE FIND Cab Heat Air LGP Package 30" Tracks Winch Fair Leads 5500 Hours Never In Woods

HFW232 saw, 30.5 tires, operates properly, engine has blowby.

2014 Caterpillar 564 Forwarder -3500 hours -Tight and dry machine -Grapple and boom tight and dry -Tracks included on pricing

2014 CATERPILLAR 545D GRAPPLE SKIDDER 14,XXX FRAME HOURS RECENT ENGINE RECENT TANNY HEAT AND AC GOOD TIRES AND CHAINS VERY WELL MAINTAINED 100 PAGES OF ALL SERVICE RECORDS FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

CAT transmission rebuild at 7,100 hours 35.5 Tires, 19’ grapple

QUADCO 2900 intermittent saw 29? cut, dry, tight, ready to work. 28” single grouser pads u/c SC 57 Hotsaw available

FACTORY WARRANTY THROUGH 8/5/23 FITS 305-306 CAT NEXT GEN MACHINES INCLUDES 585-0454 JUMPER LINES 5850431 WIRING HARNESS INCLUDES S40 24” HD DIG BUCKET, AND 48” S40 DC/ GRADING BUCKET Online Owner's Manual REQUIRES 570-7210 MULTIFUNCTION JOYSTICKS TRS6 – PART NUMBER 5858423 (PIN ON TOP) S40 BOTTOM WITH GRAPPLE TINES

CAT G126 Contractors Grapple FOR USE WITH: "CB" Linkage FOR USE WITH: PIN ON OR PIN GRABBER COUPLER Online Owner's Manual

1998 Caterpillar 525B Grapple Skidder, No Winch, 12,700 Hours, Tires are 30.5 x 32, Good Tread, New Hydraulic Pump, Axle has New Bearings, Center Section is Tight, Front Axle Bearing Replaced, Two Seals in Cylinder Replaced, New Bearings in Cradle, Ready for the Woods. Operating Weight 35,800 lb Overall Length 21.29ft in Overall Width 11.11ft in Height To Top Of Cab 10.61ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 Caterpillar 579 Log Loader with CTR 426 Delimber, 13,000 Frame Hours,, Enclosed Cab with Heat and Air Conditioning,, Meter is Reading 3,400 Hours, Ready for the Woods. Weight 36,480 lb Height 13.5ft in Width 101.3 in Height 161.9 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.