Equipment For Sale

Cooks edger, 6" thick x 36" wide capacity, 2 movable blades, set up for tailing belt, hyd drive, includes controls, tailing belt, dust auger under edger, nice condition and ready for production

Cook Accu Trac AC 36 Portable Band Sawmill. 4582 on diesel Power Unit has trailer Package. Located in Clarkrange, TN 38553 Call for video of sawmill running. Runs Great! Contact Zach Kittrell 931-224-0699 for more information. Seller moving, motivated to sell.

COOK 2 SAW EDGER-BOTH SAWS SLIDE W/9' INFEED ROLLCASE, 20HP MTR & 7 1/2 MTR S/N 3682981

MLS Number 10679774 Cook Grade Lumber Resaw 30 HP Will saw 16" wide No return 1 1/4" to 2" blades

Cook 6" x 48" 2 Saw Edger. W/ in & out feed.

Coollair Model SPL-CBY72N.1Exhaust / Intake Fans - 72" - 2 HP, Belt drive Industrial/Commercial Heavy Duty Panel Axial Exhaust Fan Estimated Dimensions 80" x 80" Each heavy duty all welded structural frame, heavy duty self aligning ball bearing pillow blocks, heavy duty V belt drive with cast iron sheaves, 8 Blades Baldor M3558T AC Motor 2HP 208-230/460V 1725 RPM 3 Phase Frame 145T 3PH 60Hz TEFC Belt Size (Qty 2) BX 88 GREENHOUSE FANS, ARGICULTURAL , WAREHOUSE , HEAVY DUTY , https://www.coolair.com/ Call 800-459-2148 for more info.

MLS Number 11413038 Cooper Overhead End Dogging Scragg With Debarker And Gang Edger Transfer Chain Conveyor x 60’, H82,1-7.5 HP 480V gear drive 54" Cut Off Saw, 20 HP 480V motor, hyd stop gates, 20 HP hyd pack 4 strand x 12' long Debarker In Feed Deck, 5 HP 480V gear drive, H78 16” wide x 19’ long log haul belt conveyor (driven from debarker in feed tire drive) Cambio 24" Debarker, 75 HP 480V drive, spiked in/out feed rolls 20 HP 480V drive 3’ wide x 36’ long hour glass rolls transfer, 7.5 HP 480V gear drive 5-strand Scragg in feed deck x 20', H82, hyd log stop loader, 7.5 HP 480V gear drive Cooper Overhead Scragg Mill, 30 HP 480V 150 gal hyd package, variable speed cable drum feed works with pantograph arm Log positioning rolls on infeed w/ double overhead dogging system, 48” dia. saw husk(125 HP 480V each saw), setworks control 2-18” wide 2-position slab and side board belt conveyors, operators control cab w/ controls, camera and monitor for centering log 8-16’ length capacity, maximum log dia. 22”, largest square cant 12” x 12”, smallest square cant 4” x 4” 5-strand lower camel back landing transfer x 9’-6” long, 4-strand hyd lift transfer to gang edger and cant center bypass Center bypass rolls and belt conveyor to edger out feed landing transfer 10” mainland gang edger w/ 200 HP 480V drive,34” inserted tooth saws with 5/16” kerf(24 spare saws with collars), 2-2-2-4 spacing 6” x 50” mainland board edger w/ 150 HP 480V electric drive, 24” inserted tooth saws with 5/16” kerf, 8”-4”-4”-10”-6” pockets, 7-individual actuated self tailing belt conveyor out feed c/w splitters Camel back transfer,4-strand x 27-1/2’ long, H78B, 5 HP 480V gear drive 2-Saw Trimmer, 4-strand x 10’ long, 16’-4” between 20” dia. saws,10HP 480V drive on feed works and saws, 16” wide x 28’ long out feed belt conveyor, 5HP 480V gear drive 4-strand x 26’ long H78 camel back transfer w/ 5HP 480V gear drive

Complete mill that needs to be removed from the current location. Seller will not split up the operation. (2) Infeed Decks: - (2) 3-Strand Infeed Deck 24' Long - H82 Chain - 3-7/16" Shaft - (2) 10 HP Drives - 3-Strand infeed deck 60' Long Cut Off Saw: - 54" Saw - 20 HP Motor - Hourglass rollers - Hydraulic length stops - Diverter gate to debarker Debarker - Infeed Deck - Cambio 24" Debarker - 75 HP Main motor Scragg: - 5-strand Infeed, 20' Long - Copper Scragg: 30 HP Hydraulic package, variable speed cable feed works with pantograph arm, log positioning, 48" saws with 125 HP motors, (2) 18" 2-position slab conveyors, cab, 8'-16' length capacity, max log 22", largest cant 12"x12" - Outfeed sorting system to two edgers: 5-Stand lower deck, 4-strand hydraulic lift to gang edger Gang & Board Edger: - 10" Mainland Gang Edger: 200 HP Motor, 34" inserted tooth saws with 5/16" kerf - 6" x 50" Mainland Board Edger: 150 HP motor, 24" blades, self tailing outfeed conveyor Trim Saw: - 2-Saw Trimmer with outfeed Greenchain: - Camel Back Landing Transfer - 4-Strand x 26' Long - 4-Strand: 8'4" Decline transfer - 4-Strand 66' Greenchain

2004 Cooper 16ft Enddogging Scragg S/N CM-6181

1988 Cooper End Dogging Scragg Mill with 48" Diameter Blades & 125HP Motors S/N CM-6076. Out and ready to go.

COOPER Dropsaw Trimmer - 24' left hand trimmer. Cuts up to 8" thick and 24 feet long. 15 hp saw motors. Zero saw adjustable for desired overtrim. Saws every 2 feet from 6 to 24 feet. 11 lugged feed chains with even-ender. Hydraulic variable speed feed. Controls and console remain wired. Over dimensional for transporting 32' long x 11.5' wide x 10'3" tall.

Cor-Dus Custom Belted Live Rolls 12" x 12.5' With Motor and Drive.

Cor Dus 12" x 5' Belt conveyor

In stock and ready to ship! Coral EuroDry Paint Booth - 3500-11771 CFM - 5'-16' Wide

Brand new System - IN STOCK! Coral FM 10 Ready Dust System 5,000 RPM 10 HP 230 or 480 V

In stock and ready to ship! ICON Pro Series from Coral - Integrated Fan - Easy installation - Plug and play! - 2900-3500 CFM - 5.5-7.5 HP

New in the crate - Ready to ship! The ICON class dust system from Coral comes in 1-5 bag systems ranging from 1,400-3,800 CFM. - Easy installation! - Plug & Play setup - 3-10 HP Available!

2021 CORD KING CS2740 MODEL 60 279 ORIGINAL HOURS 134 HP DUETZ T4F ENGINE 60" CARBIDE CIRCLE SAW 58 TON SPLITTER 16 WAY WEDGE GRAPPLE ASSIST HYDRUALIC LOG STOP HIGH FLOW OIL COOLER 20' INFEED CONVEYOR 5 LEG LIVE DECK CAB WITH HEAT AND AC 24' OFFLOADING CONVEYOR TUMBLEKING DEBRIS TUMBLER 16' OFFLOADING CONVEYOR 32' DOUBLE CHAIN CONVEYOR, 10' HOPPER LIKE NEW CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2022 Cord King Model 44 HD 2030, Equipped with a Deutz 74 HP Diesel. ONLY 98 ORIGINAL HOURS,, 29" Cutting Capacity, Hydraulic Chuck Quick Change Box Wedge 16' Infeed, Hydraulic Log Stop, Auto Cycle ,Hydraulic Oil Cooler. Optional $2500.00 in Price, 5 Year Engine Warranty, Hydraulic Oil Cooler, 3 Leg Folding Live Deck, New Style Fold up Discharge Conveyor. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2021 Cord King Model 60 Firewood Processor, Deutz Diesel Engine with Only 466 Hours, Self Contained 16' Discharge Conveyor, Enclosed Cab with Heat, 27" Cutting Capacity, 58 Ton Splitter, Dual Drive4 Leg Live Deck,60 Carbide Teeth, Auto Clamping, Hydraulic Oil Cooler, (2) 16-way Hydraulic adjustable quick change box wedge (5 × 5) (4 × 4) piece for packaged firewood , 20 infeed with continuous chain drive feeding, -Overhead Log Grapple assist (Crooked Log), -Pintle Hitch. Tumble King debris separator, Hydraulic log stop (adjustable 12"-24" length) Ready for Work Weight: 16,000 lbs Transport Dimensions: 8’-6” wide, 12'-0" high Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.