Equipment For Sale

Air Conditioner Arrangement, Mass Excavator Auxiliary Hydraulics Pressure - High Pressure Combined Hydraulics - Two Way Emissions Level Front Shovel Hand and Foot Control Lighting Mirrors Radio - AM FM Radio Regulatory Status Thumb Type - Hydraulic Tier 1 Compliant Tier 2 Compliant Ultra Low Sulfur Diesel Fuel

2016 Doosan DX140LCR-5, Hydraulic Thumb, 36" Digging Bucket, 4320 Hours, Rubber Pads on Steel Tracks.

2011 Doosan 225DX Manuel thumb but is plumbed for hydraulic attachments UC is good (65-75%) Machine needs nothing Ready for the job site

DOOSAN portable lighting with only .2 hours.

MLS Number 11411411 2016 Doosan DX300 LL Logging Processor 5967 hours Doosan 265HP Engine Forestry Cab with Hydraulic Tilt 28” DG pads on 80% Undercarriage Tight and Dry Very Good Condition SOUTHSTAR Processor Model QS600

2017 Doosan DL250 Wheel Loader, 650 hours with scales. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2018 Doosan DL250-5, Hydraulic Coupler, Aux Hyd, Bucket. Clean Machine.

2010 Doosan dX140LC -5400 hours -A/C and heat work -Power pack is a browns Brontosaurus Brand with a deer 4045 engine making a 125HP -Includes -Ryan’s equipment stump grinder -Tag brand bucket 36” dirt bucket with tag quick coupler - Bodine demolition grapple -Also have a brand new denis Cimaf tilt system I can add in for extra cost Ready to work

2018 Doosan DL220-5 Wheel Loader, In Stock Ready to go, JRB Hydraulic Quick Coupler and 3 Yard Bucket.

Aluminum Open Top, Spring Suspension, Aluminum Top Hinge Door, Aluminum Floor, 22.5 Tires Shurco Lock and Roll Tarp, Extruded Aluminum Top and Bottom Rail, Side Post on 16" Center Settings, Aluminum Prepainted White Sides, Front Ladder Same trailer with Slide tarp $41,900 Same trailer with Live Floor $66,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

Aluminum Open Top Live Floor, 48x102, Air Ride Sliding Tandem, Aluminum Rear Barn Style Doors, 22.5 Tires, Shurco Lock and Roll Tarp, Hallco 4000 Series Floor with 3/16 Slats, Extruded Aluminum Top and Bottom Rail, Side Post on 12" Center Settings, 12" Crossmembers, Aluminum Prepainted White Sides, Front Ladders Air Ride 45x102 $69,500 Spring Ride $66,900 Prices are plus FET LMI is your go to source for semi-truck trailers located in Waverly, Tennessee! We have been family owned and operated since 1980. We are North America’s largest stocking dealer of lowboy trailers. We are proud to be ranked #1 in New Trailer Sales for Pitts Trailers since 2009, Dorsey’s Top Dealer since 2015, Jet’s largest detach dealer, and Landoll’s Top 3 Dealer since 2019. Our inventory also includes new and used forestry, scrap, and material handling equipment and trailers, and we’re proud to be an authorized dealer for Barko, Robotec, CSI, and Demco. We also carry parts for the equipment lines we carry. Give us a call today and we will get your parts shipped out quickly. Need your purchase moved? We have a network of over the road trucks to get your trailer to you ASAP! Need your purchase financed? We offer financing options to fit your needs. We accept and welcome used trade-in trailers, as well as purchase used trailers. Our location stocks and install on-demand the following: toolboxes, ramp kits, chains, binders, straps, bungees, bulkheads, headache racks, tarps, sliding tarp systems, aluminum wheels, new and used tires, everything you would need for your flatbed, drop deck or lowboy. Check out our inventory online. If you don’t find what you’re looking for, contact us and we’ll help you track it down. We look forward to serving you!

1991 Dorsey open top walking floor trailer; swinging doors; spring ride; serial number 1DTV75W22MA200926

2018 Dorsey Trailer, Good tires, maintained well, located in Tazewell, VA Contact Zach for more information. Ready to hit the road. 931-224-0699

DOUCET 12-SECTION Clamp Carrier (Hydraulic)Specifications: -- (12) Sections, 8-1/2' width, -- (9) Clamps per section (108) clamps total, -- 36" Clamp opening (rapid change) with 2-1/2" high jaws.Complete with: -- 5 HP hydraulic power pack and motor for rotation -- Hydraulic clamp tightening; -- Pneumatic overhead panel flattener.Note: Tear down not included

Good Condition 3 phase .5 HP motor

DOUCET 16-SECTION Clamp Carrier (Hydraulic)Specifications: -- (16) Sections, 8-1/2' width, -- (6) Clamps per section (86) clamps total, -- 32" Clamp opening (rapid change) with 2-1/2" high jaws.Complete with: -- 5 HP hydraulic power pack and motor for rotation -- Hydraulic clamp tightening; -- Pneumatic overhead panel flattener.Note: Tear down included

2001 Doucet EM2 End Matcher

DOUCET ERS-96/RS-75 MULTI-BLADE PANEL GROOVE/RIP SAW SYSTEM:The Doucet ERS-96/RS-75 Automated Panel GROOVE/RIP Saw System is designed to GROOVE and/or RIP panels as well as edge the sides of core materials. Ideal for plywood, OSB, MDF, HDF and other composite panels.This Line was originally designed for Engineered Flooring Blanks.ERS-96 Grooving Specifications:40 HP - 3,500 RPM belt driven saw arbor motor. Material width cap. 96" maximum. Material thickness 0.5" - 0.625" maximumGrooving pattern on 4" centers across the 96" width of panel. Depth and width of groove approx. 3/16" kerf/width by 1/8" deep.3" dia. Arbor shaft with 1.5 HP motor for motorized arbor adjustment for panel thickness. Saw arbor accessible from above for tool changes. -- Feed system:5 HP - 1,750 RPM feed motor, variable feed speed up to 75 FPM.(4) Powered bottom feed rollers & adjustable top idler pressure rolls with positive panel support during grooving operations.Top & bottom feed rollers have slip resistant urethane covered rollers, feed rollers are chain driven with air tensioning. -- Complete with:Dynamic saw arbor brake; Infeed anti-kickback fingers; Saw blade safety interlock cover; 12" dia. dust collection outlet (4,000 CFM required). RS-75 Ripping Specifications:40 HP - 3,500 RPM belt driven saw arbor motor. Material width cap. 60" maximum. Strip width cap. 2.5" minimum. Depth of cut 0.25" - 0.75" (6 - 19 mm) maximum.3" dia. Arbor shaft with 1.5 HP motor for motorized arbor adjustment for panel thickness. Saw arbor accessible from above for tool changes. -- Feed system:5 HP - 1,750 RPM feed motor, variable feed speed up to 75 FPM.(4) Powered bottom feed rollers & adjustable top idler pressure rolls with positive panel support during grooving operations.Top & bottom feed rollers have slip resistant urethane covered rollers, feed rollers are chain driven with air tensioning. -- Complete with:Dynamic saw arbor brake; Infeed anti-kickback fingers; Saw blade safety interlock cover; 12" dia. dust collection outlet (4,000 CFM required). -- Operator Interface: Doucet OI/HMI Control System for automatic loading & stacking with minimal human intervention other than a forklift operator to bring in new material and remove the processed parts/strips. -- Options Include:&#9679 (1) Doucet AP-508 Automatic panel feeder with Indexing scissor lift. &#9679 (1) Cross Transfer Chain Conveyor to feed panels sideways by the long edge through the Groover, max width 96". &#9679 (1) Cross Transfer Chain Conveyor to feed panels short end wise through the panel RIPSAW, max. width 60" &#9679 (1) Outfeed Lift Table to automatically stack ripped strips. &#9679 Maximum weight of stack: approx. 5,000 LBS. -- Actual Model is DOUCET RS-75/ERS-96

Doucet MSP-CR-19-48-15-TRF-C-8-7 Conveyor

DOUCET EM-2 End Matcher, Double End:Specifications: -- 12" Min. to 96" max. length x 1-3/4" to 5" width x 3/4" thick cap.; bar spacing is available at 12" center to center. -- Feed chains are is powered by a 3 HP fixed speed drive at 28 lugs per minute (simple to add a variable speed drive). Equipped with independent tongue & groove machining centers laid out on opposite sides of the transport table. -- Capacity is approx. 8,000 - 10,000 board feet per shift based on feed stock 2-1/4" wide x 36" long. Tongue & Groove Machining Centers with: -- 12" Dia. squaring saw; tongue station features a bottom & a 10" dia. top groover; Groove Station with 10" dia. groover; (5) squaring saws & groovers are powered by 3 HP arbor motors. -- When the machining centers, material is pushed up against the holddown press foot for justification with respect to the top of the board; material is placed between the traverse bars at the infeed end of the machine. -- While random length pieces are brought forward, material is positioned by perpendicular roller conveyors ahead of both machining centers; 3rd roller conveyor takes care of lateral outfeed. -- Roller conveyors are 24" wide and are embedded into the transport table; system equipped with motorized pinch roller to re-align pieces longer than 60" prior to the 2nd machining center. -- End-Matcher Model "EM" is designed for end-matching of strip flooring in a mid-sized volume production environment; End-Matcher "EM" is 21' long; overall width including the machining centers is 8 feet.