Equipment For Sale

Gardner Denver Electra-Saver II 75HP Screw Compressor

2L Sutorbilt -- 5 HP Motor -- 5,275 Max RPM -- Pressure to 15 PSIG -- Flows to 3015 CFM

Gardner-Denver 50HP Air Compressor

Gardner Denver Air Compressor - 25 HP - Gardner Denver Air Dryer - 250 Gallon reservoir and stand

Air compressor was used in food processing and is very clean, variable feed, Seller will load on your truck, ref # 188, Call 931-797-6284

Laminating Rolls: 61" (155 cm) roll face with thermally conductive high release silicone surface; upper and lower main rolls internally heated; temperature controlled by state-of-the-art infrared sensors and digital PID controllers Laminating Opening: 1.5" (3.8 cm) maximum opening controlled with dual air cylinders. Laminating Material Uses heat activated and pressure-sensitive materials 0 - 55" (0 - 140 cm) wide on a 3" (7.6 cm) ID core Laminating Speeds 0 to 14.5 fmp (0 to 4.5 mpm) Post Lamination: Fanless cooling system provides uniform, filtered air for thermal shock without exposure to dangerous fan blades. Vinyl Transfer Complete roll to roll transfer, lamination, and edge trimming in one pass Safety Features • Two emitter-receiver photoelectric systems protect rolls from damage. • Emergency kick cables front and rear. • All electrical and moving mechanical parts are located in bolted cabinets • Four emergency stop buttons Installation Requirement 220 to 240 VAC, 50/60 Hz, 55A. 32 A per phase. Air: 2 cfm at 100 psi, minimum(0.5 m3 at 700 vPa)

GBN 48" Block & Mat Assembly with Hydraulic Power Unit.

GBN Excalibur Pallet Nailing Machine

GBN Explorer Pallet Nailer

GBN 48" Parts Machine with Hydraulic Power Unit.

480v | Setup for Stringers | Can be converted to Block Pallets

GBN 48" Block & Mat Assebly with Hydraulic Power Unit

2017 Gehl R150 Skid Steer - Front Loader with 968 hours, enclosed Cab, Yanmar Diesel engine. Front and rear tires have 100% tread remaining. Weight 2.69 t Transport length 3.101 m Transport width 1.336 m Transport height 1.948 m Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 10740956 2011 Gehl SL4640 Skid Steer 1633 hours on meter Gauges working Diesel engine Solid pneumatic tires 30%

2018 Gehl VT320 Skidsteer 1800 hours Loftness mulching head Great shape Work ready

2017 Gehl R150 Skid Steer - Front Loader with 968 hours, enclosed Cab, Yanmar Diesel engine. Front and rear tires have 100% tread remaining. Weight 2.69 t Transport length 3.101 m Transport width 1.336 m Transport height 1.948 m Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Generac 200 HP Genset

GENERAL - 350 10", ...Tilting Arbor Table Saw with: 5 HP Motor & Rip FenceSpecifications: -- Table size: 20" LR x 28" FB x 34-1/2" H. -- Arbor dia. 5/8"; tilt 0° - 45° to right; blade speed: 4,000 RPM. -- Max. depth of cut: 3-1/8" at 90°; 2-1/8" at 45°; max. width of dado cut 13/16". -- Max. rip cap.: 52" Right.Equipped with: -- 8" Left & right table extensions. -- 5 HP Motor.Complete with: -- DELTA "Unifence Saw Guide"; 43" L x 3-1/2" H Rip Fence System. -- Blade Guard. -- Miter Gage.

GENERAL - 40-400, ...SINGLE SPINDLE SHAPERSpecifications: -- 7.5 HP Motor, 1-1/4" spindle. -- (4) Working speeds: 3,600 - 5,000 - 7,200 & 9,000 RPM. -- 5" Vertical spindle adjustment. -- Table dimensions: 30" x 36"; Distance in front of the spindle: 16-1/2"; table insert rings: 5-1/2" & 8-3/4"; split style adjustable fence.Includes: -- Push button magnetic switch & spindle reverse rotation switching. - Not included: Interchangeable spindles. -- Knives max. width cap.: 5".

GENERAL - 30-225, ...15" x 6" Single-Sided PlanerSpecifications -- Planing thickness: 1/8 - 6"; min. stock length: 6-1/2"; max. depth of cut: 3 mm (0.12"). -- Table size: 14-1/2" W x 19" x 30-1/2" H. -- Cutterhead speed: 5,000 RPM; Feed speeds: 16 & 20 FPM. Equipped with: -- 3" Dia. 3-straight knife cutterhead; 3 HP Motor. -- Serrated spiral infeed & smooth solid steel outfeed rollers. -- Anti-kickback fingers & chip breaker. -- (2) In-table rollers. -- 16-1/2" W x 20-1/2" L Infeed & outfeed folding extensions. -- Built-in mobile base; pedal lock.Dimensions with infeed & outfeed tables extended: 61"; x 30"; x 48"; H.