Equipment For Sale

Duct work as pictured Make a reasonable offer For new applications please call for layout assistance and pricing!!

Assorted flanges as pictured make a reasonable offer

1800 SCFM 3 HP portable Fume collection for wielding, grinding etc Fume Arm still in crate

Avani Fume arm for wielding and grinding used as pictured

ATLAS COPCO GA 45 60 HP Oil-Injected Rotary Screw Air Compressor, with 13,975 Run Hrs. & 9,704 Load Hrs.Specifications: -- Cap. 273.2 CFM. -- Maximum allowable working pressure 132 PSI. -- Noise level 70 dBA.Equipped with: -- 45 kW (60 HP) 3,565 RPM IE3 Motor. -- Oil separator. -- Air-cooled aftercooler. -- "ELEKTRONIKON GRAPHIC" Digital controller & monitor system, with LCD Display, Touchpad, & Automatic restart after voltage failure.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Compressor is currently ready to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service in April 2024.

ATLAS COPCO GA-30 FF Rotary Screw Air Compressor w/DryerSpecifications: -- 40 HP - Approx. 187.4 CFM at 125 PSI, single-stage oil-injected rotary screw air-end & totally self-contained. -- Standard features: -- Inlet air filtration, oil injected lubrication, long-life RDX (Roto Duty Extend) synthetic oil; direct-on-line motor starter, and drain trap. -- Equipped with: -- Elektronikon Operator display panel, PLC controller, with pressure gauges, control mode selection, and hour meter. -- Includes: -- Built-in Refrigerated Air Dryer.

Altas Model GX11FF 15 HP Compressor 3,580 Hours

Atlas Copco GA-18 Screw Compressor S/N AII 260972 125PSI

Atlas Copco GA7 Screw Compressor S/N AII 134402 132PSI

Atlas Copco GA37 220PSI 50HP Compressor

Atlas Copco 100HP ZE 4 Combustion Air Blower

Atlas-Copco FD345 Air Dryer S/N 300197

ATLAS COPCO GA 45 60 HP Oil-Injected Rotary Screw Air Compressor, with 15,985 Run Hrs. & 11,072 Load Hrs.Specifications: -- Cap. 273.2 CFM. -- Maximum allowable working pressure 132 PSI. -- Noise level 70 dBA.Equipped with: -- 45 kW (60 HP) 3,565 RPM IE3 Motor. -- Oil separator. -- Air-cooled aftercooler. -- "ELEKTRONIKON GRAPHIC" Digital controller & monitor system, with LCD Display, Touchpad, & Automatic restart after voltage failure.DE-INSTALLATION & SHIPPING PREPARATION NOTE: Compressor is currently ready to ship and can be loaded from a dock or ground level. It was fully operational without any issues when removed from service in April 2024.

---Liquidation Listing---Free Loading--- 60 HP Rotary Screw Air Compressors (2 Available) https://exfactoryauctions.com/Detail/AC-232162/event/L052024$1

---Liquidation Item---Free Loading--- New, Never Used 1,293 CFM Cycling Refrigerated Compressed Air Dryer https://exfactoryauctions.com/Detail/AC-232164/event/L052024$1

Atlas Copco SF2 Air Compressor with 18,750 Hrs

ATLAS COPCO - GA 55, ...Rotary Screw Compressor with Air Dryer 75 HP - 1,755 RPM Motor, totally self-contained, single-stage rotary screw air end; approx. 380.1 CFM at 125 PSI; 132 PSIG max. rated operating pressure, max. modulation pressure 135 PSI.Standard features include: -- Inlet air filtration. -- Oil injected lubrication, -- Motor starting control system. -- Air cooled after-cooler, moisture separator and drain trap.Operator Display Panel with: -- Pressure gauges, control mode selection, remote & automatic start, and hour meter.Includes:INGERSOL RAND "TS 325" Air Dryer wired on 230 Volt single-phase.Total operating hours: 52,774.

Auburn End Pro End Matcher Width Cap: 8" Thickness cap: 2" Spindle motor: 5 HP Min piece length: 4" Variable speed spindle Spindle diameter: 1-1/4"

austin Western super 30l motor grader s/m 361-540 side shift mold board, scarifier, 4321 hrs

AUTO-V-GROOVE AVG-48 MFT UNIVERSAL V-GROOVER: -- Specifications:(1) Head automatic cross & linear V-Groover, 48" max. material width on cross-groove,Unlimited length for linear grooving, 1-1/4" max. material thickness. -- Features:(1) 10 HP - 3,600 RPM Motor, 30 mm dia. belt driven precision cutter arbor, 3-1/4" max. cutter width.2 HP Hydraulic feed motor for infinitely variable crosscut feed speed from 0 - 50 FPM & 0 - 60 FPM for linear feeding.Heavy-duty double belt feeder assembly for linear grooving. -- Includes: Adjustable pneumatic material hold-down bar.(1) 84" x 24" Main table, (1) 20" x 58" auxiliary table, (1) large 96" long floating table on rails. -- Complete with: Automatic tape applicator (12" max. dia. tape roll), manual quick crank tape applicator positioning system. -- Options Include: An assortment of V-Groove cutters as pictured.Actual Model is AUTO-V-GROOVE AVG-48-M/FT.