Equipment For Sale

2017 Komatsu D65PX-18, 4039 hrs., Stk# KM19457, Cab with heat and A/C 6 way blade Winch Komatsu SAA6D114E-6 engine, 217 HP 51,960 lbs Columbia, MO, $219,500

2016 Komatsu WA500-7, 8447 hrs., Stk# KM19654, 9.8 yard bucket Komatsu SAA6D140E6 engine 353 HP 75,435 lbs Portage, IN, $229,500

2014 Komatsu 445XT-L Feller Buncher, Machine has 12,000 Hours, Engine is Cummins 8.3 300 HP, Quadco 22" 360 Degree Head, Undercarriage is 75%, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Ready for the Woods. Weight 72,091 lb Height 14' 1" Width 10' 8" Length 29' 0" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2023 Komatsu 430-5 hot saw, 18 hrs., comes with Komatsu Care Package: 3 years or 2000 hrs., (whichever comes first), Komatsu Factory Warranty Package of 2 years or 5000 hrs., 1.9% financing to qualified buyers, $599,900

2013 Komatsu D51 PX-22 dozer, 4236 hours, Undercarriage @ 75%, New Cutting Edge, A/C works great, Everything works, nice machine, $92,900

2012 Komatsu 430-2 Track with a J.P. Skidmore CF22 Processor Head, 6,700 Original Hours, Undercarriage is 80-85%, Enclosed Cab with Heat and Air Conditioning, Ready for the Woods Length 26 ft 10 in Width 10 ft 8 in Height 11 ft 9 in Weight 64,460 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2001 komatsu D39PX 5500 hours Winch Forestry package New rebuilt final drives 80% on tracks Runs great

2021 KOMATSU XT430-5 FELLER BUNCHER 4,400 HOURS QUADCO HEAD GOOD UNDERCARRIAGE CUMMINS QSL9 ENGINE 70,000 LB OPERATING WEIGHT VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2018 KOMATSU WA270-8 WHEEL LOADER 2,193 HOURS 29,000 LB OPERATING WEIGHT GOOD TIRES NO RUST CLEAN CAB GOOD GLASS VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

Air Conditioner Auxiliary Hydraulics Pressure - High Pressure HYDRAULIC COUPLER Lighting Mirrors Pilot Control Radio - AM FM Radio REAR CAMERA Regulatory Marking

2017 Komatsu PC88MR Excavator, Engine has 3100 Hours, Enclosed Cab with Heat and Air Conditioning, Pin Grappler, Hydraulic Quick Coupler Filler, Undercarriage Good at 80%. Ready for the Woods. Length 20 ft 0 in Width 7 ft 6 in Height 8 ft 9 in Weight 19,421 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 12937591 2020 Komatsu PC130 Excavator 1939 hours 70% UC Hydraulic thumb AC Nice condition

Table Configuration: • KOMO VR 512 Mach I CNC Router • 60 x 144" Cast aluminum machined vacuum table • Table has been designed for High Flow vacuum pump • Ideal for nested based manufacturing • Heavy Duty fixed Gantry Bridge • A-Frame style Gantry Support legs • Pop up part locating pins (set of three pins) Head Configuration: • 12 HP High Frequency 4-pole Router Spindle • Programmable spindle speeds from 9,000 - 18,000 RPM • 8-Position Dynamic tool changer with BT-30 tool holders • (6) Vertical drill spindles on 32 mm centers • (4) Horizontal boring spindles with 1 + 1opposing in the X-axis and 1 + 1opposing in the Y-axis Positioning: • All axes are positioned by AC Servo Drives • Heavy Duty Profiled machine rails and bearing trucks • Preloaded precision ball screws for positioning • Automatic Lubrication system to all bearings • Rapid travel speeds of 1,250 IPM on both the X and Y-axes • Travel speeds of 600 IPM on the Z-axis Controller: • FANUC 210i PC Front end Controller • Windows Operating system • RS-232 Serial interface • 3-axis simultaneous control • Feed rate override • Spindle speed override • Hand help pendant • Remote operating pedestal with vacuum and cycle start buttons, pop up pins, as well as emergency stop.

Komo VR512 CNC Router Fanuc Controls SN 24129-03-01-93 Quincy Vacuum Pump

Komo VR508 CNC Router 60" x 120" Table 25 HP Sullair Vacuum Pump Dust Collector (10 or 15 HP - need to confirm) (2) Two main router heads with Quick Change (2) Vertical Drill Units (1) 8 HP 10" Saw Fanuc Control

KOMO MHS AUTOMATIC VACUUM PANEL FEEDER: -- Specifications: Single vacuum Infeed & Rake-Off system for Nested Based CNC Router operation.Designed for loading of a 5' x 10' (61" x 128") panel cap. CNC Router and can handle material up to that size; Load/Rake cycle time is approx. (25) Seconds. -- Operating Process:A fully Automatic sheet Feeder and Unloader. Designed for a single bunk application and the ability to load from 3 sides.As it moves the sheet over the router table the previously nested parts are pushed onto a conveyor or sorting table, the dust is cleaned from the router table by the dust collection on the front of the gantry and the new sheet is Squared up on the router table.Full Bunk of material is loaded into staging area constructed of tubular steel with cross-support and safety guides to properly position bunk, preventing damage by Forklift operator to loader base.Loading is performed via a vacuum cup system with (4) rows of adjustable vacuum cups, (2) cups per row; front-to-back spacing is fixed and cups are adjustable left-to-right.Material is picked up from the top of the stack and loaded onto the router table, pusher arms at front & right side square the material onto the table.After machining, the vacuum lift picks up another sheet for processing; as it brings it over the side, squaring arm rakes the processed panel and skeleton onto a side table. PLEASE NOTE: This unit will need to be integrated with the controller of your current CNC Router. Actual Model is KOMO MHS.

2013 Komptech Cribus 2800E trommel screen with 4,735 hours. Diesel generator Tier 3 for 480V/60 hz power socket for external power supply 480v/60Hz drums: 1/2" & 1-1/4". Power socket external supply towable, new fines cleated sidewall belt Oct 2020, new belly belt Aug 2020. Operating Weight 35,274 lb Length 34ft 9in Width 8ft 4in Height 13ft 1in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2012 Komptech Cribus 2800e Trommel -4735 hours -74hp -1/2 1-1/4 in -7ft 2inch drum -Complete records on machine -Will produce up to 220 yards cube per hour

CAT C18 Length 25ft (transport) / 35ft 9in (working) Width 9ft 4in (transport) / 11ft (working) Height 11ft 2in (transport) / 13ft 7in (working) Loading Height 9ft 6in. Discharge Height (10°-35°) 5ft 11in - 13ft 6in.

KRAEMER B21/40 Shaker Style Rectangular Baghouse. -- General Data: 10,889 CFM Square Baghouse with (6) 55-gal. barrel waste collection underneath (barrels not incl.), 1,406 sq. ft. of filter media from 5" dia. polyester filters (washable) for mixed dust, 1.0 TEFC HP motor for mechanical shaker bag cleaning. -- Equipped with: KRAEMER 23" Material Handling Blower ground-mounted blower belt driven by a 40 HP TEFC. -- Includes: Support legs (not shown), panels forFilter Access/Explosion doors, Electrical Control Panel with motor starters. Msc. piping if you want it.. -- Overall dimensions of housing 112" by 112" by 148" Ht. Weight of housing about 3,500 Lbs.