Equipment For Sale

2019 Link-Belt 3740 Road Builder REDUCED -7300 original hours -Tight and dry -UC is at 70% -Hydraulic thumb -Comes with 2 buckets as pictured Work ready

2005 Linkbelt 210 LX Track Log Loader, Tilting Cab, New Undercarriage last Year, Both Final Drives Resealed, All Cylinders including Grapple Cylinders Repacked, 90% of Glass Windows Replaced, Enclosed Cab with Heat and AC, Heavy guarding and Cat Walks, Pierce Boom and 52" Grapple. Ready for the Woods. Operating Weight 59,013 lb Shipping Length 42.91ft in Shipping Height 10.71ft in Overall Width 11.96ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2007 Link-Belt RTC8050 13,700 Hours 50 Ton One Owner Certification expired 2/21 Auxiliary Winch Block & Ball Greer LMI & A2B Excellent Condition

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Cummins Tier 2 Engine, 249 hp (186 kw), Operating Weight: 82,893.811 lbs (37,600 kg), Shoe Width: 23.6 in (600 mm), Max Digging Depth: 288.97 in (7,340 mm), Max Digging Height: 403.14 in (10,240mm), Fuel Capacity: 163.78 gal (620 l) Shipping Not Included - Call for Pricing!

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! ATTACHMENT IS NOT INCLUDED Cummins QSC8.3 Tier III Engine, 280hp (209kw), Operating Weight: 81,571lbs (37000kg), 32"" Track Pads, 10'6"" Arm, 2 cu yd 57"" HD bucket with side cutters, Heavy Lift Hyd Pwr Boost Hyd Circuits, Control Pattern Changer, 2 way Hyd Circuit w/ Controls, Attachment piped for 2 way Aux Hyd, 2-speed Propel Circuit, Travel Alarm, Suspension Seat, Pilot Controls, Radio, Precleaner, Beacon, 2 outside & 1 inside review mirror, High ambient engine cooling package, Bucket Capacity- 1.6-2.3 m³, Travel Speed: 3.2mph (5.3 km/h), Bucket Breakout Force: 54853.3lbs (244 kN), Maximum Dig Depth: 288.9in (7,340 mm), Reach at Ground Level: 429.1 (10,900 mm), Maximum Dig Height: 403 (10,240 mm), Dump Height: 281.8 (7,160 mm), Maximum Dig Depth of Vertical Wall: 254.3in (6,460 mm), Overall Length: 36’8’’, Overall Width: 10’6’’: Overall Height: 10’5’’ Shipping Not Included - Call for Pricing!

1yr/ 1 hour powertrain & hydraulics warranty. ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Cummins Tier 3 Engine, 260 hp (194 kw), Operating Weight: 82,893.811 lbs (37,600 kg), Shoe Width: 23.6 in (600 mm), Max Digging Depth: 288.97 in (7,340 mm), Max Digging Height: 281.88 in (7,160 mm), Fuel Capacity: 163.78 gal (620 l) Shipping Not Included - Call for Pricing!

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Enclosed Cab w/ Heat, A/C & Radio!! Quick Coupler & Hyd. Thumb!, Cummins QSB6.7 Engine, Net HP: 142, Operating Weight: 50,500 lbs, Fuel Capacity: 108.8 gallon. Max digging depth of 21.7 feet (7 m) with a max reach along ground of 31.8 feet (10 m). Shipping Not Included - Call for Pricing!

ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! (Breaker is NOT included in price!) Enclosed Cab w/ Heat, A/C & AM/FM Radio! Cummins QSB6.7 Diesel Tier 3 Engine, 178.3 hp (133 kW) @ 2,000 RPM, Operating Weight: 55,115lbs, Standard Track pads: 32 in. (800mm.), Standard length arm: 9ft. 10 in. (2.962m), 50 in. wide 1.55 cu. yd. H.D. bucket., Heavy lift hydraulic circuit and power boost digging circuit, Control pattern changer. 2 way aux. hyd. Attachment piped for 2 way aux. hyd. circuit. Two speed propel circuit w/ 90Db travel alarm. Suspension seat. Pilot Controls, 3 in. seat belts and Rotating Beacon. H.D. Counterweight. Air filter/Pre-cleaner. Two outside and one outside rear view mirror. High ambient engine cooling package. Operation manual, parts book and one key. Bucket Capacity: 0.8-1.4 m³, Travel Speed: High: 5.3 km/h Low: 3.1 km/h, Bucket Breakout Force, max, ISO: 160 kN Maximum Dig Depth: 276.1in (7,015 mm), Maximum Dig Height: 365.9 (9,720 mm), Dump Height: 269.2 (6,840 mm), Overall Length: 401.5 (10,200 mm), Overall Width: 125.5in (3,190 mm), Overall Height: 125.9in (3,200 mm) Shipping Not Included - Call for Pricing!

LMC - 460 IR, Dust Collector 20 HP Motor; free-standing & self-contained internal air return system; 16-bag unit rated @ 6,850 CFM. -- Equipped with: (16) Upper cloth filter bags with 144 sq. ft. filter area. -- 17" Inlet dia.; dust baffling system to fill bags evenly. - Complete with: 7" Dia. x 60" long high flow filter bags; quick clamps for easy replacement of lower bags and Heavy-Duty 14-gauge fabricated steel construction. -- Motor starter included!

2020 LOAD TRAIL 16' DUMP TRAILER WITH WIND UP TARP GVWR 14000 POUNDS

GB-CIS Single-end 575V / 3 Ph / 60 Hz 5” wide rubber pad conveyor Equipped with industrial motor for full power cutting and sanding capacity

Lobo 3-Head 43″ Wide Belt Sander (+ Flap/Brush Head)43" width cap, Drum, Drum, Combination HeadHead Configuration1st Head: 9"; diameter grooved rubber-covered contact roll, with 20 HP – 1,760 RPM Motor.2nd Head: 9"; diameter grooved rubber-covered contact roll, with 15 HP – 1,760 RPM Motor.3rd Head: Combination Head with 6"; diameter grooved rubber-covered contact roll, smooth steel contact roll, with a 2″ air-inflated finishing platen, & 15 HP – 1,760 RPM Motor.Specifications -- All (3) heads have dial indicators for positioning PLUS a FOURTH dial indicator on the platen. The fourth head is a flap sander brush with 3 HP -- Between heads one and two you will finds hold down shoes. Hold down shoes are used to control a workpiece as it passes through the sander, making it easier to run shorter parts through as well as prevent trailing edges and sniped or dubbed leading edges. -- Overall all capacity is 43″ wide X 5-5/8″ thick. -- Sanding Belt Dim. 43" X 75"Equipped with & Features -- The feed mat, besides having 100% life, is 43″ wide and 7-1/2′ long. -- The feed motor is 3-1/2 HP and has variable speed from 5-45 FPM. -- The “FPC-515"; Touchpad Position Controller with LED Display for programmable thickness adjustment is in near flawless condition.

Year: 2006 Working Width: 25mm to 230mm (1" to 9") Working Thickness: 8mm to 120mm (0.31" to 4.72") Bottom Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Top Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 7.5kW (10 HP) Side Spindles (x2): 40mm diameter, 0-20mm transverse movement, 6000 RPM, 5.5kW (7.5 HP) Configuration: Bottom, Side, Side, Top, Top, Bottom Feed Motor: 4kW (5.5 HP) Elevation Motor: 0.75kW (1 HP)

Lobo 6-Head Moulder 9" Wide capacity

LOCATELLI "OMK-300" Automatic Lathe with Sanding; From automatic feeding to finished product ejection - a complete "Turning & Sanding" System. -- 11-13/16" Max. between centers, 3-1/8" max. & 5/16" min. stock dia., 5.5 HP spindle motor with (3) spindle rotations of 3,020 - 4,580 & 6,400 RPM.6-Station Rotary Carousel/Drum with the following operations: -- Station 1: Pickup and centering of workpiece. -- Station 2: Turning with hydraulically operated roughing & finishing gouge. -- Station 3: Finish turning with hydraulically operated finishing gouge; rough & finish gouges advance via 1.5 HP hydraulic motor at a rate of 0.33 - 52 FPM. -- Station 4: Initial sanding with adjustable 0.5 HP vibrating brush. -- Station 5: Secondary sanding with adjustable 0.5 HP vibrating brush. -- Station 6: Ejection of finished workpiece. -- PLC Function for immediate fault detection and facilitates setup. Complies with CE high standards for operator safety. -- Features: Billet capacity has been increased to a special 5.9" x 5.9" (150 mm square). -- Complete with: Separate operator control panel. -- Includes: Inventory of spare parts and tooling. -- Machine kept under power but has not been used for production for several years.

Lower Denibbing Sander

Loewer Discmaster 6TD Brush Sander Vacuum Bed

2022 Loftness N38440 G4 Mulcher, Under 50 Hours of Use! Please Call For More Info

KOMATSU 430-5 BRACKET FIXED MOUNT 411XL BAR SAW BOTTOM WITH 3/4" CHAIN INTEGRATED TOP SAW HYDRAULIC UPPER DELIMBING KNIFE 360 DEGREE NON-CONTINUOUS FIXED MOUNT ROTATION LOGMATE 510 CONTROL SYSTEM 1.3-71.3 CM BETWEEN FEED ROLLERS MAX CUT DIAMTER OF 80 CM V-STEEL ROLLERS 4182 LBS