Equipment For Sale

2014 Bandit 1590XP Chipper, Equipped with a Perkins/Cat 142 HP Turbo Diesel Engine, 4300 Hours, Hydraulic Winch, Hydraulic Lift Cyl, Autofeed System, New Tires, Ready for Work 15" Capacity. Length: 16' Width: 7' 5" Height: 8' 8" Weight: 9,000 pounds (approximate) Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Bandit 4680 Beast Recycler, Cat 3412 1,000hp with 6,000 hrs, 30 Tooth Mill, Radio Remote, Magnetic Head Pulley Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Bandit 1390 15” Drum Chipper, 140 hp Cat Diesel, Winch, Auto feed, Lift cylinder, Hydraulic swivel and height adjustable discharge. Weight 7,500 lbs Length 188" Width 81" Height 110" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Barberan UV Oven

BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg.F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump,water and steam piping Emissions Control: All required baghouses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

2022 Barko 495B with Barko grapple & Big John carrier

2019 Barko 495 Log Loader, Equipped with a CSI 264 Delimber and Topping Saw, Hydraulic Landing, Machine has 19,500 Hours, Enclosed Cab with Heat and Air Conditioning Ready for the Woods Approximate Operating Weight 48,500 lbs (without attachment) Shipping Height 11' 3" with tilt cab option Overall Height 12' 9" Overall Length 41' 3" with boom extended Overall Width 11' 4" Ground Clearance 28" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Nice trailer mounted loader with buck saw. Cummins diesel. Joy stick controls. Nice cab. Extra bar for buck saw.

2021 Barko 595B, 3860 hrs., hydrostatic, 52” Barko grapple, Rsquared 5628 Delimber, CSI 4400 groundsaw with extension, 2021 Pitts Trailer, Ready to go to work,

3385 HOURS CSI 264 ULTRA DELIMBER BIG JOHN TRAILER

2021 Barko 595B, 3800 hrs., Hydrostatic, R squared 5628 Delimber, 52” barko grapple, CSI 4400 slasher ready for the woods, $205,000

160A Barko Log Loader, Cummins Engine, 5500 Hours, Saw Buck, 5th Wheel Trailer, Tight/Nice, We’ll Maintained

2014 Barko 595ML Log Loader -12917 hours -Cummins -Hydraulic Kodiak series 3 trailer -No slack, tight turn table -Cold A/C -Heat -Radio everything works

2022 Barko 595B Log Loader -3300+ hours -Kodiak 3 trailer -Lights and tires good -Tight and dry machine Ready to work

2019 Barko 495B Delimber CSI cut off saw Hanfab slasher 6500 Hours Pitts trailer Great condition

BARKO 225 KNUCKLEBOOM LOG LOADER #11706

Barko 495ML for parts , runs and operates good turntable is shot . 4552 Rotobec

Brand New Barko 5222 Log Grapple ready to go to work! With a 52' opening this grapple is sure to load any logs you can fit. It comes complete with an Indexator rotator and link for your convenience and is built Barko Strong. Will ship anywhere in the country. Give us a call today to order!

New 2023 BARKO 930B Industrial Tractor Standard Options - Cummins QSL 8.9L T4 Final w/320 HP at 2,200 RPM - Fuel Tank 127 gallon (481 L) - DEF Tank 10 gallon (38 L) - Foot pedal operated hydraulic wet disk brake - Hydraulic axles with differential lock - Remote mounted cooler with auto reversing fan - Certified operators cab with A/C and heater - AM/FM radio with CD player - Nine (9) external LED cab lights 360 Degrees - Air knife windshield cleaning system - Left hand joystick steering, - MD4 7"" touchscreen display - Variable displacement pump and motor - Air compressor with filter and quick connect - High pressure filter on auxiliary circuit - In Cab hydraulic pressure diagnostics - Barko Telematic System (1 Year Free) INCLUDING THE FOLLOWING OPTIONS Industrial Tractor Foot Travel 30,000 # Hydraulic Winch Rear View Camera with Monitor 67Lx34-26 Primex 20 ply New 2023 SHEAREX HM-100SV2 100"" Mulching Head - 100"" Mulching Head Cutting Width - 36 Teeth on rotor - Optimal Target Diameter: 24"" - Approximate weight: 5,095 LBS - 2 x 110 CC Motors - Operating Speed: 2,300 RPM - Bolt on liner - Hydraulic pushbar - Front Deflector - Electronic controls - Barko Bracket - Maintenance Kit - Dewalt Grinder Kit 1 Year / 2,500 Hour Warranty

2001 BARKO 295 LOG LOADER METER READS 8,097 HOURS DELIMBER BUCKSAW NOT INCLUDED,, BUCKSAW CAN BE ADDED FOR ADDITIONAL $10,000 GOOD TRAILER CLEAN CAB GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTH DEFERRED PAYMENTS WITH GOOD CREDIT IN-HOUSE FINANCING FOR LOW CREDIT TYPES GRANITEHE.COM