Equipment For Sale

NOVA TTF-6200 Dry Kiln System; Unassembled Front Load Kiln with high horsepower Heat & Exhaust. -- Specifications: Interior Dimensions: H 10' 3,5" (3.14 m), D 7'2"(2.19 m), W 25' 3" (7.7 m). -- Loading Door Opening: H 9' 10" (2.85 m), W 25' 3" (7.7 m). 1/8 " Aluminum sidewall bumpers, side hinged doors, exterior installation. -- Average 4/4 capacity: 5,100 bd. ft (12 m3) with 3/8" (9 mm) stickers. -- Average 8/4 capacity: 6,120 bd. ft (14 m³) with 3/8" (9 mm) stickers. -- Price shown is for kiln only. -- High horsepower heat requirement: 128 k BTU/hour. -- Heated Floor System, manuals and blueprints. -- Electrical Requirements: 230 VAC, 1 Phase, 60 Cycle, 25 kw/Hr max.

Unassembled Front Load Kiln with Standard Heat and Exhaust -- Interior dimensions: H 17' 6" (5.33 m), D 25' 8" (7.8 m), W 26' (7.9 m). -- Loading Door Opening: height 14'6" (4.4 m), width 25'3" (7.7 m). 1/8" Aluminum Bumper Walls, Top Hinge Door, Exterior Installation. -- Average 4/4 capacity: 25,459 Bd Ft. with 3/4" stickers. Average 8/4 capacity: 33,293 Bd Ft with 3/4" stickers. -- Price shown is for kiln only. -- Standard HP Heat requirement: 382k BTU suitable for drying dark hard woods; Optional high HP Heat requirement: 674k BTU suitable for drying softwood and white hardwoods. -- Electrical requirements: 480 VAC, 3 Ph., 60 Cy; 16.5 kW/Hr. Timber Management Control System with touch screen operator interface, data recording, remote access & networking capability. -- Features: Control room with heated air intake; 12'H x 4'D x 26'W. Top Hinge door opening System includes "230" electric chain hoist. Boiler Room: 12' W x 25' D x 17'6" H. 10' roll up & (1) access door. - Timber Dry Management Network Capability.

(2) Unassembled front load Kilns only System with high HP heat and exhaust designed to hold 8,461 bd/ft (20 cub.m) of 3/4" (25 mm) lumber and 10,475 bd/ft (25 cub.m) of 8/4" (50 mm) lumber (35 cbm). -- Kilns internal dimension: Height 12'3-1/2" (3.75 m), Depth 16' (4.88 m), Width 21' (6.4 m). -- Loading door opening of 10' (3.05 m) x 21' (6.4 m); 1/8" aluminum side wall bumpers, side hinged doors, exterior installation. -- High HP will service the heat requirements up to 245k BTU/Hr. -- Electrical requirement of 230 VAC, 3-Phase, 60 Cy; 7.21 kW/Hr. -- System includes: Timber Dry management automated Dry Kiln Controls for each kiln, touch-screen operator interface, data recording, optional remote access, and networking capability, Replacement part kit for a kiln. Manuals & Blueprints

NOVA PELLET - N-Plus Plant Complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line: -- Capacity: 1.5 - 2.4 tons/Hr (1.4 - 2.2 metric tons/Hr). -- Raw Material: Wood chips, sawdust, and wood shavings. -- Power: 523 HP (390 kW) installed, 443 HP (330 kW) average.The Pellet Plant consists of the following main components: -- (1) Wood Chip Hopper: 706 cu. ft. (20 cbm) volume; includes: Discharge Screw and Motor. -- (1) Rotary Drum Dryer: 1.5 - 2.0 Tons/Hr (1.4 -1.8 metric tons/Hr) dry material capacity, moisture reduction from ...25% to 12% (Optional: Dryer for higher moisture contents); includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC (Optional: additional Dust Filter). -- (1) Biomass Burner: Approx. 955 Lbs/Hr (433 kG/Hr) Wood Chips, max. 45% moisture content. -- (1) Magnetic Separator. -- (1) Hammer Mill: 1.6 - 2.2 tons/Hr (1.5 - 2.0 metric tons/Hr) dry material capacity, 177 HP (132 kW) installed power, 1.2" x 0.78" x 0.2" (30 x 20 x 5 mm) max. grain size. -- (1) Dry Chip Silo: 1,130 cu. ft. (32 cbm) volume, 154" (3,900 mm) diameter, 476" (12,100 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, Safety System with Spark detection, and Rotative Valve. -- (1) Pellet Mill (Type: N-PLUS): 1.5 - 2.2 tons/Hr (1.4 - 2.2 metric tons/Hr) capacity; 215 HP (160 kW) main drive; includes: (1) x Die, (2) x Rollers, Electrical Cabinet with PLC. -- (1) Vibrating Screen. -- (1) Pellet Cooling Column. -- (1) Double Pellet Bin: 159 cu. ft (4.5 cbm) volume. -- (1) Automatic Packaging Machine: (5) bags/minute capacity; includes: Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kG Bags, semiautomatic Pallet Wrapping machine. -- Auxiliary Equipment: Conveyors, Ducts for Dedusting, Fan for Silo loading, etc. -- Shipment to US port; Mechanical & Electrical installation, start-up, and training included.

Complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line. -- Capacity: 0.9 - 1.3 Tons/Hr (0.8 - 1.2 metric tons/Hr). -- Raw Material: Wood chips, sawdust, wood shavings. -- Power: 335 HP (250 kW) Installed, 295 HP (220 kW) average.The Pellet Plant consists of the following main components: -- (1) Wood Chip Hopper: 706 cu. ft. (20 cbm) volume; includes Discharge Screw, Motor. -- (1) Rotary Drum Dryer: 1.0 - 1.2 tons/Hr (0.9 - 1.1 metric tons/Hr) dry material capacity, moisture reduction from ...25% to 12% (Optional: Dryer for higher moisture contents); includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC (Optional: additional Dust Filter). -- (1) Biomass Burner: Approx. 695 Lbs/Hr (315 kG/Hr) Wood Chips, max. ...45% moisture content. -- (1) Magnetic Separator. -- (1) Hammer Mill: 1.0 - 1.4 Tons/Hr (1 - 1.3 metric tons/Hr) dry material capacity, 100 HP (75 kW) installed power, 1.2" x 0.78" x 0.2" (30 x 20 x 5 mm) max. grain size. -- (1) Dry Chip Silo: 565 cu. ft. (16 cbm) volume, 124" (3,150 mm) diameter, 321" (8,150 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, and Safety System with Spark detection, Rotative Valve. -- (2) Pellet Mills (Type: N-MIDI): Each 1,100 - 1,540 Lbs/Hr (500 - 700 kG/Hr) capacity, 74 HP (55 kW) main drive; includes: (1) x Die, (2) x Rollers, Electrical Cabinet with PLC. -- (2) Vibrating Screens. -- (1) Pellet Cooling Column. -- (1) Packaging Line (Type: N-Pack): Manual operated line includes: Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kG Bags, semiautomatic Pallet Wrapping machine. -- Auxiliary Equipment: Conveyors, Ducts for Dedusting, Fan for Silo loading, etc. -- Shipment to US port, Mechanical & Electrical installation, start-up, and training included.

NOVA PELLET - N-Eco - 45 kW, ...Pellet Mill Low specific energy consumption per ton of pellet.Specifications: -- Capacity: 770 - 1,200 Lbs/Hr (350 - 550 kG/Hr) depending on the raw material. -- Main drive: 60 HP (45 kW). -- Pellet dimensions: 0.24" - 0.31" (6 - 8 mm) diameter. -- Raw Material: Wood chips, sawdust, wood shavings: 0.02" - 0.06" (0.5 - 1.5 mm) Length; 8 - 14% MC. -- Die: 15" (380 mm) Internal diameter; 0.6" - 2" (14 - 50 mm) long die holes. -- Roller: 7.2" (182 mm) Outer diameter.General specification: -- Pellet Mill with mechanical and electrical functioning system. -- Pellet Mill with (1) die and (2) Rollers. -- Electrical cabinet with: SIEMENS PCL System, touch screen, and remote modem connection. -- High efficiency motors with IE2 standards (Energy Saving). -- Raw material dosing system (frequency controlled). -- Mechanical level sensor for the saw dust hopper. -- Vegetable oil for start and end of production cycle. -- Automatic grease lubrication for rollers and main shaft. -- Electrical safety locks. -- CE conformity certificate.

NOVA PELLET N-Eco Pellet Plant;Complete Wood Pellet Manufacturing Plant including Dryer and Bagging Line: -- Capacity: 770 - 1,1212 Lbs/Hr (350 - 550 kG/Hr). -- Raw Material: Wood chips, sawdust, wood shavings. -- Power: 174 HP (130 kW) Installed, 148 HP (110 kW) average.The Pellet Plant consists of the following main components: -- Wood Chip Hopper: 110 cu. ft. (3 cbm) volume; includes: Discharge Screw, Motor. -- Rotary Drum Dryer: 770 - 1,100 Lbs/Hr (350 - 500 kG/Hr) dry material capacity, moisture reduction from ...40 - 50% to 14%; includes: Cyclone, Rotative Valve, Electrical Cabinet with PLC. -- Biomass Burner: Approx. 220 Lbs/Hr (100 kG/Hr) Wood Chips, max. ...25% moisture content. -- Magnetic Separator. -- Hammer Mill: 770 - 1,320 Lbs/Hr (350 - 600 kG/Hr) dry material capacity, 40 HP (30 kW) installed power, 0.78" x 0.78" x 0.2" max. grain size. -- Dry Chip Silo: 180 Cu/ft. (5 cbm) volume, 83" (2,100 mm) diameter, 264" (6,700 mm) height; includes: Dust Filter, Pulse Jet Cleaning System, Safety System with Spark detection, Rotative Valve. -- Pellet Mill (Type: N-ECO): 770 - 1.320 Lbs/Hr (350 - 600 kG/Hr) capacity, 60 HP (45 kW) main drive; includes: (1) x Die, (2) x Rollers, Electrical Cabinet with PLC. -- Packaging Line (Type: N-Pack): Manual operated line includes: Vibrating Screen, Conveyors, Storage Hopper, Pneumatic Valve, 15 kG Bags. -- Auxiliary equipment: Conveyors, Ducts for Dedusting, etc. -- Shipping to US port, Mechanical & Electrical installation, start-up, and training included.NOTE: Price and delivery terms will have to be reviewed and confirmed at the time the order is placed.

NOVA PELLET - N-Midi - 90 kW, ...Pellet Mill with low specific energy consumption per ton of pellet. -- Capacity: 1,765 - 2,315 Lbs/Hr (800 - 1,050 kG/Hr) depending on the raw material. -- Main drive: 120 HP (90 kW). -- Pellet dimensions: 0.24" - 0.31" (6 - 8 mm) diameter. -- Raw Material: Wood chips, sawdust, wood shavings; 0.02" - 0.06" (0.5 - 1.5 mm) length; 8 - 14% MC. -- Die: 15.7" (400 mm) Internal diameter; 0.6" - 2" (14 - 50 mm) long die holes. -- Roller: 7.2" (180 mm) Outer diameter.General Specifications: -- Pellet Mill with mechanical and electrical functioning system. -- Pellet Mill with (1) die and (2) Rollers. -- Electrical cabinet with SIEMENS PCL system, touch screen, and remote modem connection. -- High efficiency motors with IE2 standards (Energy Saving). -- Raw material dosing system (frequency controlled). -- Mechanical level sensor for the saw dust hopper. -- Vegetable oil for start and finish of production cycle. -- Automatic grease lubrication for rollers and main shaft. -- Electrical safety locks. -- CE Conformity certificate.

NOVA PELLET - N-Plus - 165 kW, ...Pellet Mill with low specific energy consumption per ton of pellet. -- Capacity: 2.2 - 2.8 Tons/Hr (2.0 - 2.5 metric tons/Hr) depending on the raw material. -- Main drive: 215 HP (160 kW). -- Pellet dimensions: 0.24" (6 mm) Diameter. -- Raw Material: Wood chips, sawdust, wood shavings; 0.02" - 0.06" (0.5 - 1.5 mm) length; 8 - 14% MC -- Die: 22.8" (580 mm) internal diameter; 0.6" - 2" (14 - 50 mm) long die holes. -- Roller: 9.4" (245 mm) Outer diameter.General Specifications: -- Pellet Mill with mechanical and electrical functioning system. -- Pellet Mill with (1) die and (2) Rollers. -- Electrical cabinet with SIEMENS PCL system, touch screen, and remote modem connection. -- High efficiency motors with IE2 standards (Energy Saving). -- Raw material dosing system (frequency controlled). -- Mechanical level sensor for the saw dust hopper. -- Vegetable oil for start and finish of production cycle. -- Automatic grease lubrication for rollers and main shaft. -- Electrical safety locks. -- CE conformity certificate.

NOVY 1872V Multi Spindle Vertical Boring Machine 12 Spindles Vertical boring machineSpecifications: -- Table Hardwood 18" X 72' -- Table stroke 0"- 6" -- (12) Spindles in line at 5" center to center, spindle nose with 0" to 1/2" chuck -- (2) drive motor 2 HP with magnetic starter -- (4) Spring loaded hold down -- Savety guard -- Foot swtich

Nye HD Loader Bucket Unlimited options and configuration available. Nye builds standard replacement buckets as well as specialized buckets to suit our customers' demands. Models include Hot Slag buckets, High-Rollout Buckets, Heavy Duty Loader Buckets (HD Buckets), General Purpose Buckets, (GP Buckets), Tire Buckets, Scrap Aluminium Buckets, Stump Buckets, Demolition Buckets, Garbage Buckets, and loader buckets with clamps.

2017 NYE HD Concrete pulverizer Solar 20CP47, Like new condition. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Nye builds standard replacement buckets as well as specialized buckets to suit our customers' demands. Models include Hot Slag buckets, High-Rollout Buckets, Heavy Duty Loader Buckets (HD Buckets), General Purpose Buckets, (GP Buckets), Tire Buckets, Scrap Aluminium Buckets, Stump Buckets, Demolition Buckets, Garbage Buckets, and loader buckets with clamps.

Nye High-Rollout Bucket, heavy duty design, extra dump height for loading high trucks. Nye builds standard replacement buckets as well as specialized buckets to suit our customers' demands. Models include Hot Slag buckets, High-Rollout Buckets, Heavy Duty Loader Buckets (HD Buckets), General Purpose Buckets, (GP Buckets), Tire Buckets, Scrap Aluminum Buckets, Stump Buckets, Demolition Buckets, Garbage Buckets, and loader buckets with clamps.

Nye Stump Harvester

Nyle Kiln L300 - L300 Nyle high temperature Lumber drying Kiln - 240v single phase. Capable of temps up to 160 degrees. - Bought new in 1999 Call 800-459-2148 for more info.

2014 Nyle L200M with 3500 bf hardwood capacity. 220 Single phase. Does not include fans. Includes controls, switches and wires. Power vents. Last used about 6 months ago. Photo is not actual kiln. Call 800-459-2148 for more info.

Nyle PHT350 Kiln System was powered up and tested, but not put into production.

350 Pallets / 6-8 Cords | 480V | 2023 | BTUh 800,000 | Dimensions 40' L x 8' W x 9' 6" H Drying Time: Summer - Drying: 2 - 3 Days / Heat Treating: 2 - 4 Hours Winter - Drying: 3 - 5 Days / Heat Treating: 3 - 6 Hours

Nyle Firewood Dry kiln No chamber included