Equipment For Sale

Precision 5' x 5' Chip Screen 3 Sort 2 Screen S/N S-1762

70’ Precision Vibrating Conveyor with sawdust section and chipper mouth section. In good condition. Call 800-459-2148 for more info.

48" dia. 6 knife wheel with 3 blocked, bottom discharge, good condition

Precision 58" 6 Knife Chipper w/Horizontal Feed Top Discharge S/N 3135

MLS Number 10237206 Precision Husky ProGrind 4000 Tub Grinder 4092 Hours 500 HP Cat 3406B engine Loader with cab

Believe it's a Precision 10' x 10' Dual Screen Chip Screen with Motor & Drive.

Precision 8x16 Screen

Precision 48" 3K Chipper S/N 589

58” Precision - Husky Chipper - 58” RH Chipper - Chipper Size: 58-15 - Serial #: C2555 (built in 1993) - QTY 3- new sets of chipper knives (19.625” x 4” x 0.375”) - QTY 6- used sets of chipper knives (19.625” x 4” x 0.375”) - QTY 1- 150HP Motor (old style) HP: 150 RPM: 1780 FRAME: 445T HERTZ: 60 PHASE 3 - SN: U1950114132 - Spare Parts: (6) Fan Blades or “Paddles” (2) Horizontal anvils + (1) Vertical anvil (1 ea. per set) (11) Counter knives (6 per set) Feed Plate Background: - Incredibly reliable machine for 30 years (installed in July 1993) - Rebuilt most recently in April 2023 –including belly plate - Only missing component in “complete rebuilt set” is the belly plate - Previously handled waste from 5MMBF/year post mill operation for 30 years without issues, rebuilt as needed - We needed to upgrade to a larger chipper once we started adding an additional 5MMBF/year scragg mill operation and the additional sideboard waste - Spare / used parts value ~ $17,100 Call 800-459-2148 for more info.

75" Precision 4 knife chipper with side discharge. Progress 7 x 7 Chip Shaker. Will not separate. Call 800-459-2148 for more info.

Precision 636 Slant Track Rosserhead Debarker w/ cab & controls

Precision 5' x 5' chip Screen With Cyclone.

Precision Rosserhead Log Debarker with 60hp motor on head and 15hp electric/hydraulic power unit with 30' carriage

Complete chip plant includes: - The infeed is 12’ above ground level. They were feeding it one log at a time with a shovel. - There is a single chain 12” wide leading to the debarker. - The debarker is a Salem 20” ring debarker with mcdiarmond controls. - From the debarker it goes through I think is a metal detector. It’s is enclosed, 8’ long with a belt conveyor. - 75’ of 3-strand chain that reduces to 2-strand chain for 35’ then goes to another 2-strand chain for 12’ then goes into the chipper. - The chipper is a Precision with 2- 400 hp high efficiency 3 phase motors. - From the chipper the chips drop onto a 42”x50’ inclined belt that leads to the 2 deck screen. The screen is 92”x20’ - The waste goes on a 9”x20’ incline belt and dropped into a truck. - The chips go out on a 3-strand 100’ conveyor (strands are 14” wide) to a radial stacker for loading trucks. The stacker belt is 42”x65’ - Chips can be redirected to blower unit system that will transport them to a rail siding to so they can be loaded into a rail area. It starts out with 75’ of 12” pipe running on the ground. Then it sweeps straight up to a height of about 24’ and goes 150’ to a siding across the county road. The chip loading facility is intact. - The hog is located back by where the logs are loaded onto the chain going to debarker. Here’s a list of the conveyors going back to the Kockums hog. It has a 24”x36” opening at the top. - Conveyors: 12”x100’, 12”x 25’, 12”x60’. All of these conveyors are 1 strand steel.

Precision 25' Incline & 60' Chain that was in Concrete.

Precision 3-knife Chipper with new knife holders, Model 48-11, S/N C-3132

Precision 5x5 Shaker Screen s/n 5-2259, No drive, includes elbow on top

Precision 6 X 6 Chip Screen.

Precision 6' Chip Screen with Cyclone

48" Precision Chipper - 6 knife chipper operating as a 3 knife.  Includes 100 HP electric motor. Visit https://benjones.com/shop/102005/ for more information