Equipment For Sale

2021 PROMAC HSM60 Depth Control Hi-Flow Mulcher, 95-120 HP Skid Loader, 35-45GPM, 107CC Variable Speed Motor. Please Call For More Info.

2021 PROMAC RHP 36 Rotary High Production Excavator Brush Cutter, NEW, Min of 15 ton Max 20 Ton, 80CC Drive Motor, Please Call for More Info

2022 PROMAC TDM72 Twin Disc Mulcher, Hi-Flow, 72 Cut. Please Call for More Info.

2022 PROMAC HDM48 Heavy Duty Drum Mulcher, 20-30+ Ton Excavator, 107CC Drive Motor, Very Good Condition, Low Hours

PROSAND HF-412 Curved Part Belt SanderBelt oscillates up and down.÷Feed wheel removable.

PRO TEC SNOW PUSHER USED ONCE SKID STEER SET UP LIKE NEW CONDITION

The Stringer-Mate Model SS200 offers high production splicing for operations with higher volume requirements. A two stage pump produces a 4 second cycle time for a productive, efficient splicing operation. The hydraulic system requires only 110 volt, single phase electricity to operate.

PRS Dual Max Trim Saw with Conveyors

PTR - PT-330, ...Self-Contained CompactorSpecifications: -- Charge Box cap.: 1.5 Cu/yard -- Container cap.: 30 Cu/yard -- Clear Top opening: (L x W) 41"; x 60"; -- Feed height: 40" -- Hydraulic cylinders: (2); Bore 4"; -- Hydraulic cylinder rod: 2-1/2"; -- Horsepower: 10 -- Cycle time: 31 Sec -- Total normal force: 42,708 LbsEquipped with: -- Standard 3-button controls -- On/Off key switch -- Mushroom stop

PTR - 2300HD, ...Vertical Downstroke BalerSpecifications: -- Cylinder bore: 6"; x 3-1/2"; -- Feed Height: 54-1/2"; -- Rod stroke: 48"; -- Baler chamber (depth x height): 30"; x 48"; -- Main motor: 10 HP -- Load opening (width x height): 60"; x 27"; -- Cycle time: 56 Sec -- Systems pressure: 2,000 – 2,700 PSI -- Bale size platen force: 56,500 Lbs

PTR - 3600-HDLP, ...Low Profile Vertical BalerSpecifications: -- Bale size: 60" x 35" x 30" -- Bale weight: 600 to 800 Lbs -- Baler chamber: 36" D x 36" H -- Feed height: 33" -- Cylinder bore: 6" -- Cylinder rod: 3-1/2" -- Rod stroke: 27" -- Working force: 67,858 Lbs -- Motor: 10 HP -- Loaded onto your Truck

PTR - 2507-HD, ...2-1/2 Yard Stationary CompactorSpecifications: -- Charge box capacity: 2.5 Cu/Yd -- Clear top opening (L x W): 54-1/2" x 60" -- Total normal force: 59,376 Lbs -- Cylinder bore: 6" -- Cylinder rod: 3-1/2" -- Capacity per hour: 63 Cy/Hr -- Average cycle time: 57 SecEquipped with: -- Heavy-Duty structural steel components -- 3-Button controls

SPECIFICATIONS: - Chip Capacity: 50 LBS/HR - Puck Size: 2? - Chamber Size: 16? X 6? - Puck Exit Conveyor: 6' X 6? - Approximate Floor Space: 5’8? LR X 4' FB X 6’2? H - Electrics: 480 Volt, 3 Ph, 60 Cyc Allen Bradley Panelview 300 Controller

PUTSCH EBP 950PMCR EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge material thickness 0.4 - 3 mm coil & up to 5 mm strips.Min./max. panel thickness "all units" 8 - 50 mm (0.39" - 1.97"). Max. material thickness when using CR unit is 1.77" (45 mm). Min. panel width: 95 mm (3.7") & 110 mm (4.3") min. length.Fixed feed speed of 9 MPM (29.5 FPM).Equipped with: -- Automatic coil feed magazine with an oscillatory cutting shear for uninterrupted edge feed. -- Gluing Unit: Teflon coated glue tank, approx. 10-minute heat-up time. -- Side Pressure Unit: 3-roll pressure unit w/1st roller power driven via clutch with pneumatic in & out positioning, (2) idler rollers.Workstations: -- Pre-Milling Unit: (2) 2.0 HP (1.5 kW) motors with (2) opposing 60 mm diamond cutters that are micro-adjustable to mill up to 2 mm from the panel edge for optimal, chip-free glue application. -- End Trimming Unit:(1) 0.3 HP (0.2 kW) - 12,000 RPM Motor, automatic single motor end trim unit with (2) 80 mm blades. -- Top & Bottom Trimming Unit: (2) 0.5 HP (0.37 kW) - 12,000 RPM ea. Motor with 75 mm cutters (with disposable knives) that offer a straight 2 mm radius / 15° bevel.The flush trim unit also includes 120 mm scratch-resistant vertical disc copiers that are ideal for delicate finishes. -- Corner Rounding Unit: NOTE: When using CR unit, the max. material thickness is 1.77" (45 mm) & min. panel length is 7.78" (200 mm).(1) 0.3 HP (0.2 kW) - 12,000 RPM Single motor Corner Rounding unit for leading & trailing edges. The corner rounding unit is fixed to the frame crossbeam on double linear guides and features 50 mm cutter blocks, as well as vertical/horizontal 50 mm diameter copiers for profiling straight, curved, and beveled edges. -- Edge Scraping Unit: Top & Bottom PVC Scraper for up to 3 mm radius, complete with 3 mm scrape shaving collection box. Programmable, pneumatic exclusion on/off. -- Buffing Unit:Top & bottom buffing unit (2 x 0.2 HP - 1,400 RPM motor each), tilting range 8°.Controller: "ETOUCH" Touch Screen Control for the "EBP 950" Series; the ETOUCH touch screen control is a 7-inch color programmable display.Operators can store up to (99) working programs and connect to an optional network to read statistical data, diagnostic messages and online updates.The Control permits the operator to engage or disable specific work operations, while also providing immediate access to diagnostic messages and statistical data such as hours of operation and length of coil used.Complete with:Track Drive Chain feed speed 9 MPM (29.5 FPM).(2) Rows of upper pressure wheels in holddown beam.Adjustable material support outrigger.Sound & Safety Hoods.Used Tooling -- Actual Model is PUTSCH EBP 950PMCR.

Late Model Quadco 22B w/ 360 Degree Rotation, All New Hoses and MORE

Quadco Boom adapters available to fit Timbco, Valmet, Komatsu, Timberpro, Barko, John Deere or Caterpillar feller bunchers

Several Quadco Saws Available, Ready to Work and Ready to Load! Call 740-541-1211

Quadco QFH20B Very Nice, 360 Rotation $29,500

Several different Quadco boom adapters

2020 QUADCO 2900 INTERMITTENT FELLING HEAD 2,300 HOURS ON IT 360 DEGREE ROTATION 29" CUTTING DIAMETER 6,500 LB OPERATING WEIGHT LIKE NEW CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN GRAINITEHE.COM