Equipment For Sale
10625 Results Found
QUICK 30-Section HEAVY DUTY Pneumatic Clamp Carrier with 8-1/2' width cap. -- (6) Heavy Duty zinc plated clamps per section for (180) total clamps, 38" opening on clamp. -- Jaw sizes on clamps are 3-1/2" high x 4-3/4" wide with 1° inward draft.Equipped with: -- Pneumatic overhead panel flattener, -- Pneumatic clamp tightener, -- Electric motor rotation with indexing.Standard features include: -- Foot levelers, coiled air lines where used, and flexible conduit for wires.
Call for Price
QUICK MACHINERY N-P80 Air Pod style Cold Press. -- Heavy Duty I-beam construction with machined steel plates for flat smooth pressing surface.Specifications: -- Platen pressing area size: 49" x 97" with end loading on 49" side. -- 80 PSI Platen pressure over the entire surface area with 102 PSI supply air pressure. Pressure is applied by 12.8" dia. air pods with 5.9" stroke; (28) air pods total for this size press. -- Air powered raise and lower idler rollers in the bed of the press for loading & unloading panels; raising & lowering of conveyor by control button on panel. -- Motorized Adjustable Daylight Opening from 2" to 40"; push button controls operate an electrically powered chain driven worm gear drive system for precise positioning of upper platen setting/opening. -- Controls: 60-Min cycle timers provide visual and audible signals at the end of each cycle and automatically releases platen air pressure at the end of each cycle if desired. -- Single platen 49" X 97" . -- The press model shown in pictures is a dual platen powered feed through end load press. -- Actual model is N-P80-04-08-EL-1PL-M-40-R-1Z
Call for Price
Call for Price
$ 21,600
QUICKWOOD CD2-300 Moulding & Profile Sander or Denibber;4-Head Brush Loading Sander, 12" width and 4" height cap., for 3-sided sanding & denibbing. Head Configuration: -- (2) "BH300" Overhead rotating abrasive/brush heads, both arbors equipped with a combination of abrasive and brush loadings, 12" long arbors, 12" max. dia. sanding discs. -- 0.75 HP Motor drives each arbor with inverter for 200 - 1,200 RPM arbor rotation speed. -- Right & Left ("BH-140" & "BH-100" respectively) side mounted rotating abrasive/brush heads. -- Tilting heads and adjustable in-and-out, 6" long arbor, 8" dia. sanding discs, 0.5 HP motor each head. -- 0" - 4" Max. manual part height adjustment via hand wheel; 57-1/2" long roller conveyor with PVC covered rollers, variable feed speed 10 - 60 FPM. -- Infeed & outfeed overhead holddown rolls and (1) between the top heads. Includes centralized control panel, hubs, abrasive, & brush. -- Can also be ordered with just (2) top heads or (3) heads, ie. Left or Right. Call for separate prices.
Call for Price
Call for Price
8 or more brushes arranged at 360 ° with respect to the work pieces Adjustable inclination for the profile step QRC module for the super finishing of the flat parts in view
Call for Price
TWO (2)150 HP QUINCY ROTARY SCREW AIR COMPRESSORS MODEL # 740B S/N: 800170; AND MODEL # 650H S/N: 73861. Service center tested and ready to go.
Call for Price
Call for Price
100hp Quincy Northwest QNW-V-100-F rotary screw air compressor Rogers 500 CFM air compressor Model: QNW-V-100-F Both compressors are photographed in the photo gallery Serial #1-- 060116 and #2-- 060117 Air end: model FSS204102, serial# NA064325, P/N 144220-001 Date: 4/25/2006 Motor: Toshiba 100hp, 460 volts, Two identical compressors are available Prior use was inside of a building Contact us for price and a freight rate. Can provide test run video
QUINCY "QSV-40" 40 HP vacuum pump:550 ACFM, 29.9"HgV, Direct drive rotary screw vacuum, positive lubrication fluid pump. -- Equipped with:Modulating inlet valve, temperature regulating valve, and high discharge temperature shutdown system with manual reset. -- Complete with:Complete unit enclosure, gauges, exhaust separation system, spin-on fluid filter, and magnetic motor starter -- Additional:All service records from date of purchase. -- Quincy the OEM did 1 partial and 1 full tune up every year since purchase.
QUINCY QSVB-25ANN2C Vacuum Pump:25 HP "QSVB Series", 371 CFM, 29.9"HgV rotary screw vacuum, positive lubrication fluid pump; 3″ inlet and 2″ exhaust port.. -- Equipped with:Modulating inlet valve, temperature regulating valve, and high discharge temperature shutdown system with manual reset. -- Complete with:Control panel, electrical enclosure, gauges, exhaust separation system, spin-on fluid filter, and magnetic motor starter. NOTE: The pump only has 969.2 total hours on the meter
QUINCY - QMT15 ACA, ...Air Compressor (Rotary Screw) w/DryerSpecifications: -- 15 HP - 54.9 CFM @ 125 PSIG; 120-Gallon tank mounted with Refrigerated Dryer & Filters. Equipped with: -- 15 HP TEFC Motor; air-cooled aftercooler; high efficiency inlet filter; upward package air discharge; vibration isolation; Wye-Delta start. -- 54.9 CFM @ 125 PSIG; 69 dBA; 120-gal horizontal tank; refrigerated air dryer.Total operating hours: (29,407).Specifications subject to verification
Call for Price
Call for Price
$ 5,500
Quincy screw compressor, Model; QSI245ANA31A, Serial #; 94877, 100 hp electric power, 69,848 hrs, good working condition
Call for Price
Call for Price
Call for Price
Cutting diameter up to 21.5 inches. Quick and easy adjustment of the cutting length from 7 inches up to 20 inches. 50 inch saw blade with Changeable teeth Adjustable log section splitting from 1 to 10 inch with 2 āVā shaped blades (22 Ton hydraulic ram). Operator-friendly cab (comfortable seat, sound proofing, air conditioning (optional), heating and radio). Manual or Automatic Sawing Output conveyor hydraulically orientable (40°) (optional) Screening system with hedgehog rollers. Easy maintenance: ā remote draining ā easy access to the hydraulic and electric chambers Machine connected via WIFI allowing a fast and efficient distance technical support. 4 Hydraulic Leveling Legs
Call for Price
Brand New Rabaud Xyloflam 330/450 Gas Powered kindling machine Comes with a waste tray, bagging system, reception platform. This unit is in stock ready to go.