Equipment For Sale

Verville VP400 Bagger Includes: Bag Placer & Automatic Bag Sealer 92" Tubes (2) Systems available 575v/3PH NO infeed auger or conveyor included. Systems will be available by the end of April 2024.

Verville VP300 Bagger

VERVILLE VP300 3-Station Bagging SystemSpecifications: -- Main motor: 25 HP -- High of Tubes 116" -- Bag Size 11" x 17" x Up to 30" Finish HighNote: Bin and Infeed auger/conveyor is not included.

VERVILLE 6-SCREW HOLDING BINSpecifications: -- (6) Motorized 14-1/2" Diameter Bottom Screw -- (1) Motorized 14-1/2" Diameter Exit Screw -- 11 Feet Long -- 16 Feet Wide -- 18 Feet High -- 12 Feet High Support LegsDismantled and Loaded on Truck

Verville 4 Stage Bagging System. #C921 Located in WI.

VERVILLE VP400SE 4-STATION BAGGERComplete 4-Station Bagging System -- Automatic Bag Placer -- Automatic Bag Sealer -- Bag Size 12" x 17" x up to 30" High -- Hydraulic System and Control -- Tube Height 130''Loading on Buyer's TruckNOTE: This machine requires 27' clearance inside a building.

Verville VP400SE 4-Stage Bagger Heavy duty 4" compression cylinder compared to the normal 3-1/2" Bag Placer Bag Sealer Includes: 3-Screw Feed bin, Auger infeed Located in Australia - Will ship in one 40' container.

VERVILLE VP424-S-CCW BAGGING SYSTEM4-Station Compression Bagging SystemSpecifications & Includes: -- High Tubes of 116" -- Bag Size 11" x17" up to 30" High -- Automatic Plastic Bag Sealer -- Oil Tank Heater and Modem -- Supplied with Transformer for your VoltageLoaded on your Truck

VESTIL EHLT-4896-4-56 Scissor Lift Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities.Safety features: -- Electric toe guard to protect pinch points during lowering of the table. -- Internal safety velocity fuse to maintain platform height in event of hose or fitting failure. -- Maintenance prop, and upper travel limit switch to stop table at maximum height. Specifications: -- 4,000 Lbs. lifting capacity. -- 2 HP totally enclosed electric motor. -- Platform size 48" x 96". -- Lowered height 8", raised height 56". -- 24V AC push button hand control. -- Hydraulic component rating of 3,000 PSI.

VESTIL EHLT-2464-2-55 Scissor Lift Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities.Safety features: -- Electric toe guard to protect pinch points during lowering of the table. -- Internal safety velocity fuse to maintain platform height in event of hose or fitting failure. -- Maintenance prop, and upper travel limit switch to stop table at maximum height. Specifications: -- 2,000 Lbs. lifting capacity. -- 2 HP totally enclosed electric motor. -- Platform size 24" x 64". -- Lowered height 7", raised height 55". -- 24V AC push button hand control. -- Hydraulic component rating of 3,000 PSI.

VICKERS - 60 HP, ...Hydraulic Power PackHydraulic Power Pack with all the bells and whistles: VICKERS Pump & valves and a SENTINEL tank. Hydraulic Power Pack Includes -- Variable volume, pressure compensated, piston pump. -- Capacity: 8 Cu. in./rev. -- Pressure rating: 4,000 PSI. -- Driver: 60 HP Electric motor; 1,750 RPM. -- Reservoir: 200 Gal. -- Kidney Loop: Gear pump w/filter. -- Air-cooled Heat Exchanger. -- Return line filter. -- Liquid lever switch and temperature switch. -- Fluid inspection window.NOTE: This item was installed earlier but never used. Year of manufacturing is approximate.

VIET Challenge S2-3232620-SW53 Wide Belt Sander, 3-Head with (3) Contact Rollers3-Head, 1,350 mm (53") max. working width. Solid wood and thick veneer sander. Head configuration:1st Head: Rubber covered contact roll 320 mm (12-1/2") diameter. Shore hardness 80, 18.5 KW motor, abrasive belt speed 24 m/Sec. (79 FPS).2nd Head: Rubber covered contact roll 200 mm (7.9") diameter. Shore hardness 50. 15KW motor. Abrasive belt speed 20 m/Sec. (66 FPS).3rd Head: Rubber covered contact roll 200 mm (7.9") diameter. Shore hardness 30. 14 m/Sec (46 FPS). (2nd motor 15 KW drives 2nd & 3rd headSpecifications: --All heads equipped with 1380 x 2620 mm (54 " x 103") abrasive belts; roller & pressure shoe hold downs. -- Feed system: Vacuum conveyor system. 3 KW (4 HP) motor variable speed belt drive from 3 - 16 m/Min (11 - 52 FPM). -- Material thickness range 3 - 160 mm (0.1 - 6.3"). -- Pneumatic feed conveyor tension; constant pass-line with height adjustment (for varying material thickness) with digital read-out, driven by 0.75 HP (0.55 KW) motor for the upper section. -- Machine control system: PLC processor control with sequential motor startup and storage for multiple sanding programs.Equipped with & Features: --Panel cleaning followed by turbo-jet air jets at exit side; belt cleaning by air blasts. -- Load meters on all heads. Dust extraction for each head [email protected]" diameter and [email protected]"; disc brakes on all heads; emergency stop for belt breaks. CE Compliant.Note: Comes with 2 extra rollsActual model is VIET S2-3232620-SW53 Wide Belt Sander

VIET - S211 R+ KRT, 2-Head Wide Belt Sander43" Width. cap.: Drum and Combination head.Head Configuration:1st Head: 160 mm 6.3″ Helical grooved rubber drum. 25 HP motor2nd Head: 160 mm(6.3") Helical grooved rubber drum with a platen combination head., 25 HP motorSpecifications: -- Each heads are powered by 25 HP motor. -- The heads can be programmed to pneumatically raise & lower along with the platen and do (3) sanding combinations (with the twist of a button). -- Digital height readout along with a calibration unit to the left side of the conveyor. -- Conveyor speed is controlled via a variable frequency drive 2.5 HP . --Max width: 43″. -- Max. height: 6-1/4". -- Variable speed conveyor belt drive from: 3 - 16 MPM (11 - 52 FPM).Equipped with & Features: -- Both heads equipped with: 1,130 x 1900 mm (44-1/2" x 75"). -- Roller & pressure shoe holddowns. -- Pneumatic tension of sanding belts and feed conveyor. -- Load meter on main motor. -- Disc brake on main motor. -- Emergency stops front & back. -- Roller table extensions front & back.. NOTE: This is an extremely low hour 2016 BIESSE Viet S1 dual head 43″ calibrating Wide Belt Sander.

VIET - S2-321-HP/KRT, ...3-Head Planer Sander3-Head Planer/Sander 43" with: Planer, Drum and Combi-HeadSpecifications: -- Max. operating width: 1,100 mm (43") -- Min/Max thickness: 3 mm - 160 mm (1/8" to 6.3") -- Working Height: 900 mm (36") -- Abrasive Belt dimension: 44" x 103" -- Feed speed: 3 - 16 MPM (9-3/4 - 52 FPM) -- Rubberized drum: 30 HP Motor -- Combination head with drum & platen; driven by the same motor as the sanding drum -- Extended infeed & outfeed roller -- Planer head with helical insert knives: 30 HP Drive motor

VIET - S1 211, ...2-Head Wide Belt SanderWidth Cap. 43"; Drum and Combination Head.2-Head with: (1) Contact Roller and (1) Fine Sanding Platen; 1,100 mm (43") working width. Solid wood, veneer & lacquer Sander.Head Configuration:1st Head: Rubber covered contact roll, spirally grooved, dia. 200 mm (7.9").2nd Head: Fine sanding platen, segmented, electronically controlled.Specifications: --Both heads driven by (1) main motor 15 kW (20 HP). -- Both heads equipped with: 1,130 x 2,620 mm (44-1/2" x 103") abrasive belts. -- Roller shoe holddowns, Pneumatic tension of sanding belts and feed conveyor. Feed System: -- Vacuum conveyor system for small and lacquered parts. -- Variable speed conveyor belt drive from 3 - 16 MPM (11 - 52 FPM). -- Part thickness 3 - 160 mm (1.2" - 6.3"). -- Motorized part thickness adjustment, with digital height readout. Equipped with & Features: -- SCS Control panel with storage capacity for multiple sanding programs. -- Load meter on main motor. -- Disc brake on main motor. -- Emergency stops front & back. -- Roller table extensions front & back.

VIET Planer Sander Sander model S2 321 HR/KRT ( 2018 ) !st head planer with helical insert cutter knives 30 HP 460 volts 2nd head drum contact roller 3rd head combination drum rollers with finish platen Both sanding heads run by 30 HP motor 460 volts Adjustable rubber coated pressure rollers Opening capacity range 1/8” to 6” Sanding belt size 44” x 103” Feed speed 19 to 52 FPM Electronic digital readout with auto thickness positioning Disc brakes on each machining station Front and rear emergency push buttons Electro pneumatic sanding belt tracking This machine has low hours as owner only ran half days first year and less after next years

Viking Champion 304A Pallet Nailer Good Working Condition Left Hand Setup Outfeed Roll Case

1995 | Viking Turbo 505 | Right/Right | Includes Space Parts - List in Pictures

2019 | 480V | 72" x 60"

2021 | 480V | 72" x 60"