Equipment For Sale
10558 Results Found
Call for Price
Vitap Forma Boring Machine 21 Vertical Spindles 21 Horizontal Spindles Approx $1000 worth of carbide bits DUAL LINE machine and there are (2) vertical lines of 21 spindles each for a total of 42 ...... PLUS an additional single line of 21 horizontal spindles!
VITAP LINEA 42 Line Boring SystemSpecifications: -- (2) Drill heads of (21) spindles ea., drills from bottom up, ea. support with 2 HP motor and (21) spindle boring block w/panel support mounted on top; -- Drills panels from 100 - 3,000 mm in length, and 100 - 950 mm in width. Complete with: -- Digital readouts for boring blocks, 2,000 mm bar scale fence with (5) adjustable flip stops. -- (2) Moveable overhead pneumatic holddown cylinders, foot pedal for clamping & boring cycle.
VITAP - ALFA 27, ...Construction Boring Machine27-Spindle boring head on 32 mm centers; drills vertically from bottom-up and head rotates to horizontal position for edge boring; head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth; 2-1/2 HP - 2,800 RPM motor; pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size; max. workpiece width 31-1/2". -- Equipped with: Left & right side fences for construction boring; (3) pneumatic holddown clamps; 118" line boring fence with: (4) flip stops; pneumatic foot pedal control.
VITAP ALFA 27 CONSTRUCTION/LINE BORER27-Spindle boring head on 32 mm centers, drills vertically from bottom-up and head rotates to horizontal position for edge boring, head rotation is pneumatic with switch control. -- 2-3/4" Max. drilling depth, 2.5 HP - 2,800 RPM motor, pneumatic drill head advance with speed control; head height adjustment with mechanical digital readout; 34" x 20" table size, max. workpiece width 31-1/2". -- Equipped with: Left & right side fences for construction boring, (2) pneumatic holddown clamps, 118" line boring fence w/flip-stops, pneumatic foot pedal control, magnetic starter & overload protection.
$ 1,500
For pre-glued PVC, veneer, & melamine laminate coil stock; 0.4 - 1.2 mm edge thickness; up to 35 mm panel thickness cap., automatic coil feed. -- Equipped with: Electronically controlled temperature setting for hot air blower; 3,000 Watts for up to 650° F temperature; (1) Min heat up time. -- Guillotine type front & rear end trim (with fast speed, flying knife); top & bottom flush trims with single motor drive to cutterheads. -- Overhead belt type feeder; 16 FPM feed speed. -- Mounted on machine base with panel support table.
Call for Price
VITAP - RC 92, ...Semi-Automatic Top & Bottom Edge Trimmer: New, Never Used!Specifications -- For straight & curved edge banded panels. -- Max. edge thickness: 3 mm (0.12"). -- Panel thickness: 10 - 60 mm (0.39" - 2.36"). -- Table size: 27" x 31".Equipped with: -- (2) 0.55 kW (0.7 HP) - 12,000 RPM Spindle motors. -- Large dia. guide bearings to ensure precise trimming of edges.NOTE: Sold "As Is" without Warranty!
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
$ 46,900
VALPATO LBK-150-ST 1 Feed Through Profile SanderTECHNICAL FEATURES: An added small needle type drum sander can be fitted with drum sanding aggregates of 25, ­30, ­35,­40, ­45 ­50 mm diameters which can be used for tighter curves and smaller radius sanding requirements. Storage compartments (2 in total) are located on each machine extremities, these are easily accessible and can be used for sanding belts and various tooling storage. Sanding belt motor power: 3 Kw Abrasive head motor power: 1.5 Kw Oscillation motor power: 0.38 Kw Feed motor power: 0.75 Kw Motor power for electrical adjustment of sanding group: 0.19 Kw Machine voltage: 480/3/60 Full Load Amps @ 480V: 15A Compressed air: Not required Dust collection requirement one (1) only 6" (150mm) port: 950 CFM Sanding belt speed: 14 Mt/sec Variable speed of the belt: from 5 to 25 m/min Sanding belt dimensions: 150 x 2640 mm Height of working table: 930 mm Dimensions of front working table: 1980 x 250 mm Machine dimensions: 2500 x 900 x 1600 mm Net weight: 1000 KMAIN FEATURES: User friendly PLC touch screen control panel is accessible from 360° by the operator, the control panel is centrally located on the infeed end of the machine. Factory installed variable feed drive (VFD), enables machine to run from 5 M/Min to 25M/min (+/­ 80 ft/Min). The entire sanding plenum rise and fall is motorized, it can be adjusted vertically in height to utilise the full height/width of the sanding belt. An oiling unit ensure long life of sanding plenum rise and fall master cylinder.
$ 152,000
2018 Volvo L110H -4,172 Hours -Original paint -3rd Valve -Quick Coupler -Boom Suspension -Engine Block Heater -Rear View Camera -23.5R25 Tires -118” 4.3-yd GP Bucket
$ 96,995
2018 Volvo ECR145EL -2,995 hours -A/C and Heat -Hydraulic Thumb -X1 Auxiliary -Hydraulics Plumbed for Hydraulic Quick Coupler -Push Blade -Engine Block Heater -36” Bucket w/ new teeth -15'1" Boom -8'2" Arm -20" Shoes w/ Bolt-on Rubber Pads
$ 82,900
MLS Number 12496080 2019 Volvo L50H Wheel Loader 3575 hours Volvo D4J Diesel Rockland GPX 2 yard bucket Solid tires @ 70%
Call for Price
Air Conditioner Auxiliary Hydraulics Pressure - High Pressure Beacon Combined Hydraulics EPA Label Hand and Foot Control Lighting Mirrors Pilot Control Radio - AM FM CD Radio Ultra Low Sulfur Diesel Fuel
$ 25,000
Volvo L-90C wheel loader, 20,567 hrs., includes log clamp attachment, has quick-attach, working condition
Call for Price
2019 Volvo ECR88D Excavator with 2500 hours, Quick coupler, Thumb, Blade, New Tracks, Radio, A/C and Heat. Weight 6,012 lb Height To Top Of Cab 8.91ft in Overall width 7' 7? ft in Overall length 20' 11? ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.