Equipment For Sale

2015 Wilson Pacesetter Trailer Hopper bottom Was used for grain PRICE REDUCED

2006 Wilson Pacesetter Trailer Hopper bottom Was used for grain PRICE REDUCED

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

Wintersteiger DSG Sonic Frame Saw

WINTERSTEIGER - DSG 150 ECO, ...Thin Cutting Frame SawSide & Center Guides: Fitted as standard on the basic machine to guarantee the broadest possible range of application. Specifications: -- 11 kW (15 HP) Main motor; 0.3 - 1.5 MPM feed speeds; 210 mm saw frame stroke with (450) strokes/Min. -- 30 - 216 mm Cutting height, adjustable as required; max. +/- 0.5 mm difference in block height. -- 60 - 150 mm Cutting width (side guide); (2) 23 - 70 mm cutting width (using center guide); (2) channels max. 72.5 mm using 7.5 mm guide or with (5) channels max 24.5 mm using variable block width; 300 mm min. block length. -- 1.5 mm Cutting accuracy; +/- 0.2 mm Cutting loss (depending on saw length). -- Max. (30) saw blades (excluding scraper saws); (3) 120 mm sawdust extraction tubes. -- "Air Jet" Module: Cleans the lamellas and saw blades during the sawing process by blowing away the sawdust; cools down the saw blades during the sawing process and cleans the shaving space of the saw blades. -- "Air Jet" also increases the saw blades life and improves the lamella's accuracy. Sawdust-free lamellas can then be glued immediately after cutting.Comes with transformer

Section of WIREWAY HUSKY Teardrop Pallet Racking Equipped with: (4) 18,000 Lb. Cap. 8-1/2’ H x 3-1/3’ W Teardrop vertical frames, with 3” W x 1-5/8” Thick Frame beams, Step beams vertically adjustable on 2" Centers. (8) 9’ L x 4-3/8” H x 2-5/8” D Step beams, with 1-3/8” H x 1” D Step.

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

Wood Beaver 18 Firewood Processor Up to 20" capacity 16' conveyor Adjustable 4 way wedge

WM LT300 w/Cab. Electric Powered.

2016, Diesel engine. Around 14,000 hr. In operation and running reliable, Joystick controls, deluxe setworks. Axle & wheels in good shape road ready. Option to purchase loader arms separately Replacing it with a new mill. It is in good working condition. Be sure and check this out. Call 573 823 2015

Wood-mizer end-around tables for band resaw, includes infeed/outfeed tables, hyd/ electric drive, both sections are 78" x 100" overall' excellent condition

Wood-Mizer 4 Head Band Resaw

2015, 530 Hr.Diesel engine, Hyd. All is in Excellent condition here is a unit for you. Still is in operation .Box full of new bands. Call 515 493 8070

2022 Wood-Mizer LX25 Manual push mill. No power feed. This mill can be converted into a resaw with use of a belt. 7 HP gas engine. Cap 26" x 32.5' with 20' extension. Mill has been made portable. Mill is stored under cover.

Wood-Mizer 4 Head Resaw with Run around -4 brand new electric motors -Upgraded to 20 HP 3600 RPM motors -Everything is great working order -Still hooked up and operational

System includes: Wood-Mizer LT 70 Sawmill Wood-Mizer 2 Blade Edger Wood-Mizer 2-Head Resaw Norwood 2- Blade Resaw All powered by electric motors All decks and conveyors

6 Head Resaw with Auto Run-A-Round