Equipment For Sale

Carrier 28ft vibrating conveyor, 24" width, 4+" high, 5HP,

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

Carthage Brunnette Machine 21" Ring Debarker 150' Per Minute put through.

CAS (COMPRESSED AIR SYSTEMS) B73H84-E Reciprocating Air CompressorElite Series 7.5 HP 80 Gallon Horizontal Compressor @ 175 PSI / 24 CFMFeatures & Specifications: -- Access to Compressor Valves without Compressor Head Removal. -- All UL Electrical Controls -- ASME Tested Powder Coated Steel Tank. -- Auto Start / Stop. -- Bearings on Both Ends of the Crank Shaft. -- Centrifugal Unloader. -- Disk and Spring Valves. -- Fully Enclosed Belt Guard. -- Heavy-Duty Air Filter. -- Heavy-Duty (2) Stage Solid Cast Iron Pump. -- Industrial Grade Electric Motor. -- Magnetic Starter Mounted and Wired. -- Needle Bearings, and Inserts on Rods. -- Stainless Steel Flex Air Lines. -- Swedish Steel Valves. -- TEFC Drive Motor (3 Phase Only). -- Torrington Needle Bearings. -- 2-Grove B Width Motor Pulley. -- 2-Piece Tank Top Plate Design.Elite Compressor Features: -- All Basic Features. -- Automatic Tank Drain. -- Belt Guard After Cooler. -- Low Oil Monitor. -- Tank Discharge Ball Valve. -- Vibration Pads.

CASADEI RANGER MC 3012 CNC MACHINING CENTER (VERTICAL, W/ATC): -- Specifications: Flexible "Vertical" Machining Center reaches movement speeds of 131 FPM (40 MPM) in X-axis, 98 FPM (30 MPM) in Y-axis, & 66 FPM (20 MPM) in Z-axis. -- Work Capacity:Max. part size for: X-Axis is 118" (3,000 mm); Y-axis 47.2" (1,200 mm); max. part thickness 3.9" (100 mm). -- Worktable:Vertical Phenolic MATRIX Grid table with: (5) Adjustable "tubeless" pneumatic locking panel supports, (3) adjustable vacuum pods per support.Pop Up Pneumatic backstops & pneumatic side stops for material positioning on the LH or RH side of the machine for mirror imaging. -- Boring Unit:(1) Boring block with: 2.25 HP (1.7 kW) - 4,000 RPM Motor.(10) Vertical spindles with: (5) Spindles in X-axis & (5) spindles in Y-axis.(6) Horizontal spindles with (2 + 2) in X-axis & (1 + 1) horizontal spindle in Y-axis.(1) X-Axis grooving saw: 5,000 RPM; for max. 120 mm dia. saw blade. -- Machining:(1) 6.7 HP (5 kW) Router with: ISO 30 Adaptor, variable speed from 1,000 - 18,000 RPM.(1) 5-Position ATC rack mounted on the side of the working unit. -- Operator & Machine Control:CNi PC Front End + Windows "XP" Operating System; 17" LCD, TFT monitor; international keyboard, soft touch keypad & industrial mouse; RS-232 Serial ports, USB ports; Ethernet connection.Real-time multitask processing; programs can be transferred via USB or downloading by wire is possible. -- Complete with:(1) 100 CBM/Hr BECKER Vacuum Pump; sound enclosure & perimeter safety devices. -- Actual Model is: CASADEI - RANGER MC 3012.

CASADEI FLEXA 208-MA-8 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge material thickness 0.4 - 3 mm coil & 8 mm (0.314") strips ~ min/max panel thickness "all units" 10 - 45 mm (0.39" - 1.77") ~ min. panel width, 100 mm (3.9") and 210 mm (8.2") min. length.Equipped with: -- Automatic coil & strip feed magazine, with Heavy Duty 3 mm PVC cap. guillotine. -- Gluing Unit, Teflon coated quick change glue tank, approx. 10-minute heat-up time, programmable temperature control w/timer if machine idles to prevent glue overheating/burning. -- Side Pressure Unit: 3-roll pressure unit w/1st roller power driven via clutch with pneumatic in & out positioning, (2) idler rollers.Workstations: -- Pre-Milling Unit: (2) 2.0 HP (1.5 kW) motors, to rectify/clean panels already sized. -- End Trimming Unit:Front & rear end trim (2 x 0.3 HP - 12,000 RPM motor ea.), with pneumatic tilting (0° - 15°). -- Top & Bottom Trimming Unit: Combination flush/bevel/radius trimming (2 x 0.65 HP - 12,000 RPM ea. motor), with pneumatic tilting from 0 - 25°. -- Corner Rounding Unit: 2-Motor Corner Rounding unit for leading & trailing edges. -- Edge Scraping Unit: Top & Bottom PVC Scraper for up to 3 mm radius, complete with 3 mm scrape shaving collection box. Programmable, pneumatic exclusion on/off. -- Buffing Unit:Top & bottom buffing unit (2 x 0.2 HP - 1,400 RPM motor each), Tilting range 8°Controller: -- "MEGA 200":Sequential motor start, 6" color monitor, up to 100 programs capacity, maintenance alarms & machine use statistics.Complete With:- Electronic positioning of upper pressure beam- Pneumatic exclusion of trimming unit and edge scraping unit- Track Drive Chain feed speed 12 MPM (39 FPM) - (2) rows of upper pressure wheels in hold-down beam.- Adjustable material support outrigger.- Sound & Safety Hoods- Used Tooling -- Actual Model is CASADEI FLEXA 208-MA-8NOTE: Pictured Dust Collector & Return Conveyor is not included.

CASADEI FLEXA 37 RMAT-7 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: 0.4 mm - 3 mm Max. edge thickness cap., (0.5 mm to 3 mm for solid strip edge thickness). 8 mm - 50 mm (0.3" - 1.97") panel thickness cap. (when edgebanding 3 mm PVC max. thickness is 40 mm). -- Minimum panel dimensions 80 mm wide x 140 mm long (3.15" x 5.5"). -- Automatic feed of coil banding and semi-automatic strip fed magazine (strips 1- 3 mm max.) with 3 mm PVC cap. guillotine.Equipped with: -- Teflon coated glue pot w/fast (10 - 12) Min heat-up time; 1 Kg. capacity. -- Guillotine to cut edgebanding in coils up to 3 mm thick. -- Pneumatically controlled pressure section with (3) pressure rollers; 1st drive, (2) idle.Workstations: -- Cutting group moves on rounded ways made of hardened steel, to guarantee high precision and reliability; cutting movement from the top of the panel is synchronized by the PLC control. -- Pre milling unit with 3 HP - 8,300 RPM High Frequency motors. -- Double motor end trimming saw unit with (2) 0.25 HP - 12,000 RPM High Frequency motor. -- Top & Bottom Trim station with (2) 0.45 HP - 12,000 RPM High Frequency motors; unit features adjustable copying on vertical & horizontal floating movements, adjustable cutter-head position by mechanical digital readouts, quick release (electrical & mechanical). -- Single motor Corner Round Unit (set up for 3mm). -- Top & Bottom 3 mm scrape station -- Top & Bottom Buffing unit with (2) 0.20 HP - 1,400 RPM motors. -- Fixed feed speed 23 FPM. -- Actual Model is CASADEI FLEXA 37 RMAT-7

CASADEI ALA 23 EDGEBANDER WITH CORNER ROUNDING0.4 - 15 mm (1/2") Edge cap., panel thickness 10 to 60 mm (.39" to 2.36"). Minimum panel length 120 mm (4-3/4") and 55 mm (2-1/8") minimum width. Equipped with: -- Quick heat-up glue system,(approx. 12 Min) 1.5 Kg glue pot capacity. -- Pressure roll section with (3) rolls - one driven. Pneumatic cut-off guillotine.Workstations: -- Double end trim, chamfers 0° - 15° -- Top & bottom flush/radius trim, bevels 0° - 15°. -- Double motor Corner Rounding station -- Top & bottom scraping for 3 mm radius, -- Top & bottom buffing (0.25 HP - 2,800 RPM motors).NOTE: Seller states that the buffing unit appears to have an electrical issue and is not currently being used by the current owner";Actual Model: "ALA 23 R"

Panel height: 0.3 – 2.36” Coil edge thickness: .12” Strip edge thickness: .015 – .24” Max Overhang Total Top and Bottom: 0.16” Min panel width (min length of 8 ¼”: 3.54” Min panel length (min width of 3-15/16?): 5.5” Feed Speed: 33 f/min Glue Tank GP-200 Power: 2.4 kW Glue Capacity: 3.3 lbs End Trimming Unit IK/200 (each): .3 HP Cutting Speed: 12,000 RPM Blade Tilt: 0-15 deg. Top and Bottom Trimming TT/K Motor (each): .4 HP Cutting Speed: 12,000 RPM Shipping Footprint: 13' x 4' x 5' Weight: 2500 lbs Equipped With: – Pre-Milling Unit – Glue Applicator and Pressure Rollers – Edgebanding Trimming Guillotine – End Trim With 2 Tiltable Motors 0-15 deg. – Top and Bottom Trimming via 2 Motors – Profile/ Radius Scrape – Glue Scraping – Buffing

2016 Casadei Flexa 47 Edgebander 230 V/3 PH

CASADEI FLEXA 37 M-5 EDGEBANDER (W/PREMILL & CORNER ROUNDING): -- SpecificationsEdge material thickness 0.4 - 3 mm coil & 6 mm (0.25") strips. Min./max. panel thickness 8 - 60 mm (0.31 - 2.36"). - Min. panel width 80 mm (3.1") and 140 mm (5-1/2") min. length.Equipped with: -- Pre-milling Unit: (2) x 3 HP - 8,300 RPM High Frequency motors with counter-rotation. -- Automatic Coil & Strip Feed Magazine with: Heavy Duty 3 mm PVC cap. Guillotine. -- Gluing Unit: Teflon coated quick-change glue tank; approx. 10-minute heat-up time, programmable temperature control w/timer if machine idles to prevent glue overheating/burning. -- Side Pressure Unit: 3-Roll pressure unit w/1st roller power; driven via clutch with pneumatic in & out positioning; (2) idler rollers.Workstations: -- End Trimming Unit:Front & rear end trim, (2) x 0.3 HP - 12,000 RPM ea. motor with pneumatic tilting feature (0° - 15°) from the control panel. -- Top & Bottom Trimming Unit: Combination flush/bevel/radius trimming (2) x 0.65 HP - 12,000 RPM ea. motor; tilts from 0° - 25°. Pneumatic 3-position presets programmable from the control panel. -- Corner Rounding Unit: 2-Motor Corner Rounding unit for leading & trailing edges. -- Edge Scraping Unit: Top & Bottom PVC Scraper for up to 3 mm radius; complete with 3 mm scrape shaving collection box. - Programmable, pneumatic exclusion on/off. -- Buffing Unit:Top & bottom buffing unit; (2) x 0.2 HP - 1,400 RPM ea. motor each; tilting range 8°.Controller: -- "MEGA 300 TS"Sequential motor start, 12" color touch screen, up to (100) programs capacity; maintenance alarms & machine use statistics.Complete with:&#9679 Chain feed motor; feed speed 11 MPM (36 FPM) &#9679 (2) Rows of upper pressure wheels in hold-down beam &#9679 Adjustable material support Outrigger &#9679 Sound & Safety Hoods &#9679 Tooling: (1) Used set of tooling in the machine, cutter-heads are combination flush/bevel/radius &#9679 Original Factory Machine documentation. -- Actual Model is: CADADEI FLEXA 37 M-5.

CASADEI FLEXA 47 RMA8 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING):Specifications: -- 0.4 mm - 3 mm Max. edge thickness cap., (0.5 mm to 3 mm for solid strip edge thickness). 8 mm - 50 mm (0.3" - 1.97") panel thickness cap. (when edgebanding 3 mm PVC max. thickness is 40 mm). -- Minimum panel dimensions 80 mm wide x 140 mm long (3.15" x 5.5"). -- Automatic feed of coil banding and semi-automatic strip fed magazine (strips 1- 3 mm max.) with 3 mm PVC cap. guillotine.Equipped with: -- Teflon coated glue pot w/fast (10 - 12) Min heat-up time; 1 Kg. capacity. -- Guillotine to cut edgebanding in coils up to 3 mm thick. -- Pneumatically controlled pressure section with (3) pressure rollers; 1st drive, (2) idle.Workstations: -- Pre-milling unit with 3 HP - 8,300 RPM High Frequency motors. -- Cutting group moves on rounded ways made of hardened steel, to guarantee high precision and reliability; cutting movement from the top of the panel is synchronized by the PLC control. -- Single motor, double-end trimming saw unit with (1) 0.25 HP - 12,000 RPM High Frequency motor. -- Top & Bottom Trim station with (2) 0.45 HP - 12,000 RPM High-Frequency motors; unit features adjustable copying on vertical & horizontal floating movements, adjustable cutter-head position by mechanical digital readouts, quick release (electrical & mechanical). -- Includes (2) 3 mm radius cutters. -- Corner Rounding Unit: 2-Motor Corner Rounding unit for leading & trailing edges. -- Top & Bottom 3 mm scrape station -- Top & Bottom Buffing unit with (2) 0.20 HP - 1,400 RPM motors. -- Fixed feed speed 23 FPM. -- Actual Model is CASADEI FLEXA 47 RMA8

Casadei R32 MK Pin Router

2021 Case TR310B Skid Steer, Engine ONLY HAS 95 Hours, Engine is a 75 HP Tier 4 Turbo, H Pattern Controls, Selectable ISO, 2 Speed Drive System, High Flow, Back Up Camera, Snow Push Box JB Attachment, 6 way dozer blade Hydraulic Forks, Ready for Work. Operating Weight 8,880 lbs Length - with Bucket 11 ft Width Over Tracks 6 ft Height - Top of Cab 6.6 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1999 Case 580 Super L 4x4 Backhoe, Engines is a Cummins with 3300 Original Hours, New Battery and Starter, Enclosed Cab with Heat, No AC, Ready for Work. Weight 13,282 lb Transport length 22.57 ft Transport width 7.15 ft Transport height 10.87 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

MLS Number 12999975 Case 455C Crawler Loader 2899 hours on meter Sweeps Back screen

Case 321F 3000 hours Forks Bucket AC Heat Runs and operates great

MLS Number 12783859 Case 450C Dozer 4433 hours 4 BT Cummins engine Carco Winch New sprockets, rails and bottom rollers

The motor is rebilt with most parts Brand New and - 50 hr. Transmission in solid state. Hyd are tight. Tires are good. All in working order. CALL 270-291-1027

2020 CASE 850M DOZER ENCLOSED CAB HEAT AND AIR 6 CYL 138HP ONLY 6 HOURS WITH WARRANTY