Equipment For Sale

1992 Ford L8000 Log Truck 104k miles 8 speed Double locking rears Single bunk Clean inside and out Nice old truck

2013 FORD F750 BUCKET TRUCK 46,351 MILES 5,623 HOURS 6.7 CUMMINS ENGINE 61' CRANE HEIGHT 12' DUMP BOX BOOM INSPECTION DIELECTIC TEST COMPLETE VERY GOOD CONDITION FINANCING AVAILABLE FOR MOST CREDIT SCORES 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

F550 CHIP BED TRUCK 7.3 Diesel Engine 6 Speed 4X4 Mileage 256,289

2022 Ford F-550 with Service Body, 611 Engine Hours Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Ford L8000 Crane Truck with 5,649 Engine hours Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2009 Ford F-750 Service Truck, Equipped with Auto Crane and Welder and Crane has only 125 Hours,, Engine is a 6.7 Cummins, 80,000 Miles, 4 x 2 Drive Transmission, Ready for Work. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1988 Ford Aeromax LTS8000-113 T/A Boom Truck, IMT 8025 Extendable Boom, Hydraulic Stabilizers, Flatbed, 3208 Caterpillar Diesel Engine, Full Lockers, Allison Auto Transmission, Spring Suspension, Extendable Side Bunks for Hauling Pipe, Dual Front Winches, Spring Susp, Odometer Shows 135k M/L.

2015 FORD F750 BUCKET TRUCK 60,445 MILES LR756 61" FORESTRY BUCKET 4,245 HOURS CUMMINS 6.7 ENGINE 6 SPEED MANUAL TRANSMISSION BOOM INSPECTION DIELECTRIC TEST GOOD VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS DEFERRED PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2004 F350 Super Duty four-wheel-drive diesel. $12,000. OBO 731-336-4179

1990 FOREST PRO FLAIL CHAIN DEBARKER MODEL 23, UP TO 23 INCH LOGS, 40 TONS PER HR, 400 HP CAT 3406 CAT 3406 400HP ENGINE REMANUFACTURED 2 YEARS AGO, 6 NEW TIRES 2 YEARS AGO, RUNS GOOD HAS SOME HYDRAULIC LEAKS Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

FORESTECH ENTERPRISES - D-GR-1S: DryerDrum Dryer designed for a large Pellet plant; never put into production.Diameter (approx.): 12-3/4 Ft.Drum Length (approx.): 48 Ft.Dryer comes with Forge Tire but does not come with trunnion drives, which we can have manufactured.

Forestor 900. Owned 10 years. Last used about 2 years ago. No power. Used to split round posts. Takes a 4 x 6 and makes a 2 x 6. Call 800-459-2148 for more info.

Forestor 900 Resaw 4" Blades Powered Infeed

FORMOSA - RSN-12, ...Straight Line Rip Saw w/Laser LightSpecifications: -- Saw dia.: 14". --Saw kerf: 3.2 - 5.0 mm. -- Max thickness: 2" -- Max. process width: Left of saw blade 250 mm; Right of saw blade 500 mm. -- Min length: 200 mm -- 3,450 RPM. -- Feed Speed: 39 or 26 MPM. -- Main motor: 7.5 HP. -- Feed motor: 1 HP. -- Machine dim.: L 1,950 mm x W 1,280 mm x H 830 mm. -- Weight: 950 kG.Equipped with Laser Light.

Forrestline Laser Sights - 2016 but never used - Laso 1165 times 2.2 lasers Call 800-459-2148 for more info.

Fortis Heavy Duty sliding table shaper, 4 speeds, 2 spindles, with air cylinder. Very nice machine $4,500 - Call 218-638-2810 or 218-410-0548

2001 Foster 6 Ton Trailer Pintle hook Tandem Ramps Good decking 18' long 12k lb capacity Good shape

4INDUSTRIES 12-200 Roll Feed multiple Rip SawRoll feed multiple rip sawSpecifications: -- 12" maximum width -- 1/2" to 2" thickness -- Minimum length 16" -- Feed speed up to 200 FPM with driven bottom feed rollers, non driven top roller -- Main saw motor 40 HP -- Feed motor 7.5 HP -- Saw blade 12" diameter

FRAMA - TC-1500, ...Hydraulic Copy Lathe.Hydraulic Copy Lathe with (3) different speeds during execution of the work. Possibility of manual or automatic configuration on (3) intensities: 1) Regular working speed, 2) slow working speed for difficult points reproduction, and 3) fast speed to eliminate nonproductive points. Technical Data. -- Main drive motor: 6 HP. -- Hydraulic pumping unit: 2 HP motor. -- Max. turning dia.: 300 mm (12"). -- Distance between center: 1,500 mm (59"). -- Max. cross-slide speed: 9.5 MPM (30 FPM). -- Carriage return speed: 11 MPM (36 FPM). -- Copying device stroke 75 mm (3"). -- Max. hydraulic pressure between cones: 20 kG/CBM. -- Headstock taper: MT 4. -- (8) Turning speeds: 1,000 - 1,250 - 1,750 - 2,000 - 2,250 - 2,500 - 3,500 - 4,500 RPM. Also included : -- Knife Grinder: 1 HP motor.

John Deere Motor (Power Tech)