Equipment For Sale

Tigercat 1801 Shear for 18” softwood and 15” hardwood. 24.5 tires.

COMPLETE TRANSMISSION WITH BOTH HYDROSTATIC DRIVE MOTORS TAKE OUT OFF OF A724D-0734 MACHINE. PRICE FOR THE COMPLETE UNIT IS $12,500. WILL SELL PARTS SEPARATE LEFT DRIVE MOTOR PART # AQ092 IS $4500 RIGHT DRIVE MOTOR PART # AQ093 IS $4500 TRANSMISSION USED PART 3 9488B IS $3900 THIS ASSEMBLY NEW IS OVER $30,000 CALL GAVIN AT 601-410-3416 OR CALL/TEXT TIM 251-366-3237

TC 5702 Sawhead, 110-degree wrist. 36” tri trac New teeth, serviced and dried up.

2013 Tigercat 610C Grapple Skidder, 11,000 hours, Brand new set of dbl diamond chains, Good running machine newer motor and hydraulic pump. Weight 33,995 lb Length 21.67in Width 11 ft Height 10.34ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 Tigercat 234B, low hours, very good condition, $70,000 - Call Tom: 272-223-1324 or 570-889-3636

2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Tigercat 240B -13,000 hours -5.9 Cummins -Tight loader with small leaks -Lights good -Tires good -Plumbed for saw

30.5 tires, winch, 19’ grapple, very well maintained machine, serviced and ready to work.

Tigercat 630D with Cummins, engine needs assembled and installed - Special Pricing or Possibly Part Out

This 720E Tigercat is in good condition it has 28L-26 tires with dually plates. We will be willing to sell the cutter head off it for $15,000 separate. Or if you want a smaller head for this machine we will swap out the head for a smaller one free of charge. This cutter is located at 467 St Peter St, State Line, Mississippi If interested in more details call Gavin 601-394-7796 Tim 251-366-3237 Kameron 251-242-5493

2007 Tigercat 720E, runs good but does need a saw disk. We plan to put a disk on it. So it'll be ready for the woods when purchased. Located on our yard at 437 Saint Peter Street State Line MS 39362 For more information you can call Gavin 601/394/7796 Call or text - Tim 251/366/3237 Kameron-251/242/5493 ALL SALES ON USED EQUIPMENT ARE CASH, CASHIERS CHECK OR BANK TRANSFER.

2012 Tigercat L870C Feller Buncher -3500 hours on the following: -New engine -Pumps -Finals -Uc is around 70% -New A/C compressor and belts Ready to work

1999 Tigercat 630B -14000 frame hours -4200 on 8.3l Cummins -New fuel filter -Greased -Two boom cylinders will be needed re-repacked -Top center pin is a little bit loose but almost don’t notice yet Functional woods ready skidder

2022 Tigercat X822E -2,755 hours -Tigercat 5702 sawhead -HID lights -Webastos engine and hydraulics heater -FH400 undercarriage with 24" pads -Remainder of 3 years or 6,000hrs powertrain and hydraulics warranty which ends Aug,8th 2025 -$4,000 worth of spare hoses -Spare saw teeth and bolts -Oil filters -Machine is in like new condition

2009 TigerCat 845C -14000+hours -Uc 50% -5702 360 head -Disk in good shape -Woods ready

Tigercat 240B with Washer Saw Still under power and available for inspection.

2018 Tigercat 720G -6789 hours -5600 head -Disk @50% -Tight and dry -Tires @50% -One owner

2005 TIGERCAT 244 LOG LOADER 17,000 FRAME HOURS 2006 BIG JOHN TRAILER CTR DELIMBER NEW CUMMINS 5.9 GROUND SAW RECENT PUMPS VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

2020 Tigercat 610E -2500 hours -Tight and dry -Winch -One new tire rest @ 80% -Joystick

2014 Tigercat 620E, Woods Ready