Equipment For Sale

2005 Wilkens Walking Floor Brand New Tarp

WILLIAMS - Hammer Mill: Half-round Type ConfigurationFeatures: -- 220 HP Main Drive Motor with Belt Drive; complete with Guard. -- 26"; x 12"; Input Opening. -- Powered Input Pull Rolls -- 4"; Main Shaft with Swing Hammers, approx. 3/8"; thickness -- Ratchet Lift Access Lid. -- Mounted on Steel Support Structure with Access Platform and Ladder -- Pneumatic Bottom Discharge with built-in Viewing Window in Ducting below the Hammermill (no fan included) -- Electrical Cabinet with Motor Starters -- NOTES: This machine was last utilized to break up virgin dried pulp for further processing. Already been removed from service – ready to load.

Williams Hammer Mill 40"w #C740

Williams Hammer Mill 34" wide drum, powered by 100 HP 3-phase electric motor. SN#17053. In fair working condition.

Williams 125 CJS1 Hammermill

Williams 125 HP Hammermill 230/460 3-phase

24” x 36” inlet 8” x 36” outlet 150 HP motor fan on outlet

24” x 36” inlet 8” x 36” outlet 150 HP motor fan on outlet

Manufacturer’s Soecification Feed Type:0-19 fpm, variable feed Motor:2 HP (3450 rpm) Voltage:240V Maximum Profile Depth ¾ inMinimum Stock Length 9 inMaximum Profile Width 6 ¾ inMinimum Stock Thickness ¼ in Maximum Height Above Final Cut 3/16 in Maximum Stock Thickness 8 in Planes 7 in WideOverall Machine Dimensions:28 inL x 22 inW x 50 inHWorking Height:35 in

Model 206 For smooth moulding and planing; (1) 2 HP Baldor motor, 7,000 RPM spindle speed, variable feed rate of 1 - 19 FPM includes "Deluxe" variable feed control with magnetic drop out switch and cords. Built in Multi-Pass system and Guide sytem -- Capacity: Max. material width 7", material thickness from 3/4" to 8" max., min. 9" stock length. Max. profile depth 3/4" and max. profile width 6-3/4", planes 7" wide and can do a 7" radius with optional jig; working height 31", overall height 45", overall width 20". -- Includes: Table guides, dust hood, belt, pulley, planing knives, welded steel stand, custom moulding catalog, oil, and operator's manual. -- With OPTIONAL accessories like the elliptical jig you can make arches and elliptical mouldings, please add...$ 700. Also available in 115/1/60 and 230/460V/3/60. Weight: Approx. 242 Lbs.

Williams and Hussey 2007 W7-S model 206 planer/molder good condition Ser# 00452 Weight 250 ish Max thick 7”, Max width 7” Multi pass Baldor motor Powered infeed and out feed New std knives available at W/H for app 100/set Custom knives available from W/H

WILLIAMS & HUSSEY Planer/MoulderSmooth moulding & planing; used for making: Custom trim, molding, & millwork. Creates a variety of moldings, plus oval & round frames and curved-top frames.Specifications. (1) 2 HP BALDOR Motor; 3,450 RPM spindle speed; feed rate: 15 FPM.Capacity: Max. material width 6"; material thickness from: 3/4" - 8" Max.; min. 9" stock length. - Max. profile depth: 3/4"; max. profile width: 6-3/4"; planes: 7" wide & 7" radius with: Optional jig; working height: 31"; overall height: 45", overall width: 20".NOTE: Specifications based on Model "154" & listed electrical plate; exact model is unknown/not on machine.

Ready to run Williams and White circle saw tooth setter. Will run up to a 42" saw.

Williams Hammer Hog 30 with 125HP Motor S/N 20053

Williams Hog S/N 14482 150HP Electric Motor

WILLIAMS hammermill S/N 15958. Top opening approximately 12" x 18".  2 1/2" fixed wide hammer type. No motor but base for direct connection.  Top feed hopper included. Used to grind shavings. $4,800.

Hammer Mill. This machine is a Williams hammer mill. Item #C549

WILLIAMS Horizontal Hog - Model C32 horizontal feed, bottom discharge, swing hammer hog. Feed opening approximately 5-1/2" x 32" wide. Includes a direct drive 100 HP electric motor. Hog serial number #19369. The maximum recommended HP is 150 HP.

Williams Hog Grinder s/n 14028, 40" cutting head, 20"x29" top opening, 150hp motor