Equipment For Sale

Vollmer Finimat Circle Saw Sharpener 120V 3 Phase

VALPATO LBK-150-ST 1 Feed Through Profile SanderTECHNICAL FEATURES: An added small needle type drum sander can be fitted with drum sanding aggregates of 25, ­30, ­35,­40, ­45 ­50 mm diameters which can be used for tighter curves and smaller radius sanding requirements. Storage compartments (2 in total) are located on each machine extremities, these are easily accessible and can be used for sanding belts and various tooling storage. Sanding belt motor power: 3 Kw Abrasive head motor power: 1.5 Kw Oscillation motor power: 0.38 Kw Feed motor power: 0.75 Kw Motor power for electrical adjustment of sanding group: 0.19 Kw Machine voltage: 480/3/60 Full Load Amps @ 480V: 15A Compressed air: Not required Dust collection requirement one (1) only 6" (150mm) port: 950 CFM Sanding belt speed: 14 Mt/sec Variable speed of the belt: from 5 to 25 m/min Sanding belt dimensions: 150 x 2640 mm Height of working table: 930 mm Dimensions of front working table: 1980 x 250 mm Machine dimensions: 2500 x 900 x 1600 mm Net weight: 1000 KMAIN FEATURES: User friendly PLC touch screen control panel is accessible from 360° by the operator, the control panel is centrally located on the infeed end of the machine. Factory installed variable feed drive (VFD), enables machine to run from 5 M/Min to 25M/min (+/­ 80 ft/Min). The entire sanding plenum rise and fall is motorized, it can be adjusted vertically in height to utilise the full height/width of the sanding belt. An oiling unit ensure long life of sanding plenum rise and fall master cylinder.

Air Conditioner Auxiliary Hydraulics - 4th Valve Boom, GP Combined Hydraulics - One Way Counterweight Coupler - Quick Coupler Type - Hydraulic Differential Lock Differential Type - No Slip Emissions Level Engine Enclosures Grapple Lighting Mirrors Radio - AM FM Radio Regulatory Marking Regulatory Status ROPS - Enclosed Steering Type - Wheel Tier 1 Compliant Tier 2 Compliant Ultra Low Sulfur Diesel Fuel Vital Information Management System (VIMS)

2007 Volvo DHD D12 464 HP engine 10 speed Full locking 46k rears 4:44 ratio T ride suspension 452k miles Nice truck PICTURES COMING SOON

2016 VOLVO 170H WHEEL LOADER 6,742 HRS QUICK COUPLER 3YD BUCKET HEAT AND AC GOOD TIRES VERY GOOD CONDITION FINANCING AVAILABLE WITH NO MONEY DOWN 3 MONTHS NO PAYMENTS WITH GOOD CREDIT GRANITEHE.COM

1996 Volvo A35C, 16,981 hrs., Volvo 6cyl. Turbo diesel, automatic trans., 6 wheel drive, front/rear diff locks, tailgate, EROPS, Heat/AC, 26.5R25 tires, new air and fuel filters, %59,500

Static tipping load at full turn 22,265 lbsBucket capacity 2.9 - 9.2 yd³Log grapples 1.6 - 2.9 yd²Operating weight 31,968 - 38,140 lbsBreakout force 31,470 lbfEngine Volvo D6JMax power at 1,400 - 1,900 rpm...ISO 14396 gross 184 hp...ISO 9249, SAE J1349 net 184 hpMax torque at 1,400 rpm...ISO 14396 gross 689 lbf ft...ISO 9249, SAE J1349 net 689 lbf ftTires 20.5R25 600/65R25

2013 Volvo L70G Wheel Loader with Forks S/N VCE0L70GL08614024 18491 Hrs.

Volvo loader buckets, In good condition. Your Choice buy one buy both the price is by the piece. Write Riverside Hardwoods 663 McAtee Rd. Cadiz, KY. 42211 Call 270 498 8454

2019 Volvo L150H Wheel Loader with 12,655 hours, on a diesel engine. Good condition, all glass and mirrors intact, minimal rust. 26.5R25 Bridgestone Tires with life left. Heat and A/C. Weight 56,440 lbs Length 28.91ft in Width 9.72ft in Height 11.75ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

#201 • Volvo L70C Wheel Loader Serial #: L70CV14857. Model: L70C. Meter Reads: 24,120 hrs. Engine: Volvo Diesel. Fuel: Diesel. Tire Size: 20.5R25. 3rd Valve: no. Attachment: none. ROPS: Closed. Center to Center of Pins: 39 1/2" x 24". Lift Capacity: NA. Air Conditioner: no. Heat: no. Features and Notes: Glass is missing in cab, power quick attach has small leak when using, runs and operates.

MLS Number 10842936 2019 Volvo EC250EL Excavator 404 hours UC 95% 36" In like new condition Warranty remaining

This 2006 Volvo truck is in great condition internally and externally. The truck has 1,429,462.4 miles on it. The truck has an automatic transmission. The passenger seat has been taken off. We are currently waiting for the title of the truck to come in. If interested in this truck call Mr. Gavin 601-394-7796 Mr. Tim 251-366-3237 Kameron 251-242-5493 The truck is located in State Line, Mississippi, 467 St Peter St

Less than 400 hours! This includes the hydraulic bucket from Volvo.

1999 Volvo L50 Wheel Loader, 5800 Hours, 17.5 X 25 Tires, Bucket 2yd, Coupler, Clean/Nice

2022 Volvo L70H Wheel Loader Only 1,700 Original Hours, DEF Engine, Long boom Loader, 3rd Function, Ride Control Reversing Fan, Back Up Camera, Electronic Joystick Controls, Load Rite Scales, JRB 416 Coupler, 3.5 Yard Bucket, Extended Warranty Purchased 5000 Hours or 3 Years, 20.5 z 25 Tires, Ready for Work Compare a New Price. Weight 31,107 lbs. Length 24.64ft in Width 8.08ft in Height 10.77ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Volvo L-90C wheel loader, 20,567 hrs., includes log clamp attachment, has quick-attach, working condition

Volvo wheel loader bucket, 2 yard capacity, good condition

2022 Volvo EC250E LR -485 hours -60 ft long reach -60” cleanout bucket -Has both rear & side view cameras -Fresh 500 hour service -Extended Premier Warranty

2018 Volvo ECR145EL -2,995 hours -A/C and Heat -Hydraulic Thumb -X1 Auxiliary -Hydraulics Plumbed for Hydraulic Quick Coupler -Push Blade -Engine Block Heater -36” Bucket w/ new teeth -15'1" Boom -8'2" Arm -20" Shoes w/ Bolt-on Rubber Pads