Equipment For Sale

2019 Freightliner 122SD X15 500 HP 18 Speed Air Ride

2010 Freightliner M2 Crane Truck National 400B Crane New Cable 49648 Miles

2021 Freightliner M2 Bucket Truck Odometer38,296 miles Stock#1367 VIN 1FVACWFD1MHMR2977 Engine Make- Cummins Engine Model-6.7L ISB 240 Engine HP -240 Fuel Type Diesel Drivetrain Trans Make- Allison Trans Model- 2500RDS Trans Speed- Auto Boom Make Altec Boom Model LR7-60E70RM Boom Serial# 1120FF13027 Capacity/Full Reach 75' Boom-Type Rear Mount Class 7 Delivery is available at the buyer’s expense

2014 Freightliner Coronado with 628,000 miles. New DD 15 complete crate motor with less than 50,000 miles. New Crate Motor installed by freightliner of sav, with full warranty, new clutch installed, new spring bushings in rear, new power divider less than 3 months ago. Brand New Fifth Wheel and A/C. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Frick 00 Sawmill 4 head block 471 Detroit (missing radiator) 4 saws Steel track New wheels and bearings Needs some work

Frick Timber-Tiger 10" Double Arbor Gang Rip Saw 36" opening includes 15' shifting infeed with 10" ladder back chain. (2) 300hp 1775 RPM electric motors

Parts machine log turner hydraulic power pack other parts

Frick Saw Husk with Top Saw

Frick Sawmill 4 Head Block Mounted on a drop deck trailer. Everything folds up for transport. Includes: Cummins motor

Frick 38" 4 Head Block,Track, Paneagraph,Husk frame cab controls, Top Saw 36" and 56" Blade on Husk, Carriage & Track with T-Berry carriage Drive.

Frick Gang Edger (no motor) 636 S/N 160 with Gang of Blades.

Frick 4 Head Block Carriage With Track & Carriage Drum Drive, Husk, Cab & Controls

Frick 3 HB carriage, track, husk, cab & controls

FRUILMAC RANDOMAT-E End Matcher;For end-matching flooring or cabinet & entry door rails; the feed-thru system allows continuous feeding of random-length parts with any kind of profile.Specifications: -- Width cap. of 1-3/16" to 9-7/8"; length cap. of 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity. -- Approx. (10) cycles/Min depending on part length & width; -- Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors, and a positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed, and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time, the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Touch-screen SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation. -- Variable feed speed conveyor line; shaper head advance with led readout on the controls. -- Cutting station with overhead holddown wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps.Includes:(4) set of used tooling

FRUILMAC RANDOMAT E - End Matcher; --÷For End Matching flooring or cabinet & entry door rails or tongue and groove. The feed-thru system allows continuous feeding of random length parts with any kind of profile.÷Capacity & Description: --÷ Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- -- Approx. (10) cycles/Min depending on part length & width; --÷ Feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors. --÷ Positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. --÷ Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part. --Equipped with: -- -- Twin 7.5 HP - 7,500 RPM high-speed shaper motors which pneumatically traverse in tandem for each cutting cycle. -- -- Cutting station with overhead hold-down wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. --Controller & Operator Interface: Key Pad SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. --÷Includes Infeed and Outfeed Conveyors

FRIULMAC Quadramat Double End Tenoner:This machine is set up with (4) four profiling units left and right for a total of (8) eight -- 1,500 mm (59") Max. x 95 mm (3.7") min. opening -- Loading space 1,041 mm (41") -- Thickness 10 - 100 mm (0.4" to 3.9")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorized opening with LED readout on the control panel, approx. 25" infeed in front of hold downs. -- Variable speed feed 6-28 M/min. , feed motor 4.5 HP -- Feed chain 2-7/8" wide with rubberized pads -- Top pressure with non-stainable stretching wheels driven by gear motor and inverter with speed adjustment synchronously to chain feeding speed -- Infeed fence on left side -- Machine left side fixed, right side adjustable -- Complete control panelWorking Stations: -- 1st station: Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 2nd station Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 3rd Station : Profiling unit J-33 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm -- 4th Station: Profiling unit J-32 Right and Left. spindle motor 7,200 spindle 40 mm dia. with max tool diameter 250 mm NOTE: machine will require some rebuilding and maintenance in regards to ball screws and Dovetail Guides per statement by current owner. They are replacing it with a new machine.

Friulmac Rondamat E End Matcher

FRIULMAC - Dual-Feed, ...Double End Cut-Off SawFor squaring workpieces and for transportation to a Planer or Moulder with a straightening table.Specifications: -- 79" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left-hand fixed with left-hand fence line. -- Hopper Magazine - material capacity: Min. length: 7.87" (200 mm), max.: 79" (2,000 mm); width: 1-1/8" (30 mm) to 6-3/4" (170 mm); and thickness: 0.59" (15 mm) min. up to 2-3/8" (60 mm) max.; hopper stack height: 23-1/2" (600 mm).Each side is equipped with: -- (2) Trim saw motors, 5.36 HP each; saw blade dia. 9.84" (250 mm). -- Hydraulic feed drive unit: 4 HP (3 kW) motor. -- Trimming & throughput capacity: Up to (55) pieces/Min.NOTE: Voltage transformer for 600 Volts available with the machine

FRIULMAC Quadramat Single End TenonerSingle end tenoner with (4) heads with Jump cope, cope, disc sanding and disc sandingSpecifications: -- Workpiece Length: 125 - 1500mm -- Workpiece Width: 125-1500mm -- Workpiece Thickness: 13 - 40mm -- Configuration: Jump-Cope, Cope, Wheel-Sanding, Wheel-Sanding -- First Station: 7.4 HP Jump-Cope/Profiling Unit with 40mm Diameter Shaft, 6000 RPM Rotation -- Second Station: 7.4 HP Cope/Profiling with 40mm Diameter Shaft, 6000 RPM Rotation -- Thirds Station: 4.7 HP Sanding Wheel -- Fourth Station: 4.7 HP Sanding Wheel -- Variable Speed Control of Sanding Stations from 750 - 1400 RPM -- Feed Speed: 13 - 98 FPM