Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 25 of 506
10114 Results Found
Sort By 
$ 12,700

BALESTRINI C 70 Double Sided Feed Through Copy Shaper;Profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation. -- Reversing rotation by switch for climb cut or conventional cut. Specifications: -- Max. working width 358 mm (14-1/8"), max. working height 118 mm (4-5/8"), min. working length 240 mm (9-1/2"); max. size of cutter blocks 90 mm x 120 mm and up to 3/8" vertical adjustment of heads. -- Part on template block is being shaped by running between spring loaded spindles with copy bearings following the template pattern. -- 1 HP variable feed motor 3 - 26 FPM, hand crank adjustable horizontal rubber infeed & outfeed holddown rollers. -- Machine has (2) 120 mm diameter dust outlets. -- Machine dimensions: 53" x 49" x 43" Machine weight: 2,310 lbs.

Torry Hiddema
800-374-5009 ext:371
Call

$ 12,900

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

Torry Hiddema
800-374-5009 ext:371
Call

$ 390,000

Micro Chipper C-27 Tier II 875 HP 5173 Hours

Carolina Used Machinery
828-773-2204
Call

$ 138,900

2005 Bandit Model 4680 Horizontal Grinder, Tri Axle Machine, Cummins 1000 HP Engine, Hours Unknown, Will have hours soon, Radio Remote Control, 4 " and New 2" Screens for Regrind. Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Hammonton, NJ
NEF Equipment
855-251-2648
Call

$ 135,000

2020 Bandit 1425 Horzontal Grinder, Cat 120hp with 81 hours, Radio Remote, Magnetic Pulley, Extra Parts, Excellent Condition. Weight 12,500 lbs Width 98 in Height 120 in Length 288 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Casper, WY
NEF Equipment
855-251-2648
Call

$ 285,000

2006 Bandit 4680 Beast Recycler, Cat 3412 1,000hp with 6,000 hrs, 30 Tooth Mill, Radio Remote, Magnetic Head Pulley Length: 36’ Width: 10’ 11” Height: 13’4” Weight: 93,000 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Mount Pleasant, MI
NEF Equipment
855-251-2648
Call

Call for Price

2023 Bandit SG40 WALK BEHIND Stump Grinder with only 41 hours. Features an aggressive cutter wheel drive system, enhanced operator visibility, and enhances stability. Operator controls are mounted on a 3-poisiton console. Two joysticks control the travel of the unit, while a single, easy to use joystick controls all cutter wheel functions. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Billings, MT
NEF Equipment
855-251-2648
Call

$ 375,000

2003 Bandit Model 5680 Beast Horizontal Grinder, Engine is a Cat 3412E V12 Engine, 1000 HP, Has 13,000 Hours, Wireless Remote, Air Compressor, Pintle Hitch, Ready to Grind. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Shreveport, LA
NEF Equipment
855-251-2648
Call

$ 640,000

2021 Bandit Beast 3680T Horizontal Track Grinder, Hours 920 Hours, Caterpillar 827 HP C-27, Can turn up to 1050 HP, Undercarriage Like New, Wireless Remote Control, PT Tech Clutch, Metal Pully on Discharge, Coloring System with Spray Bars, Various Screen Sizes Machine Sells New Right Under 1,000.000.00 Million Ready to Grind NO DEF ON ENGINE. Length: 37’ 3” 3680XP TRACK 1135.4 cm Width: 11’ 7” Height: 12’ 2” Weight: 85,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Indianapolis, IN
NEF Equipment
855-251-2648
Call

Call for Price

2010 Bandit 4680T Track Horizontal Grinder, Equipped with a Caterpillar C-27 1050 HP Engine,3700 Hours Currently, Undercarriage is 85%, Machine has 2" and 3" Screens, 2nd Owner, Wireless Control, New HG600 Clutch, New Head and Tail Shaft, New Conveyor Belt, Compressor on machine, Ready for Work. Weight 95,200 lbs Width 140 in Height 152 in Length 492 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Winchester, VA
NEF Equipment
855-251-2648
Call

Call for Price

2004 Bandit 3680 Horizontal Grinder with only 2,667 hours. Equipped with a 566HP Caterpillar engine. New tires, New set of teeth. Excellent condition. Length: 37’ 3” Width: 11’ 7” Height: 12’ 2” Weight: 85,000 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Atlanta, GA
NEF Equipment
855-251-2648
Call

Call for Price

Bandit Mdl 2400 Tracked Whole Tree Chipper w/Cummins, 257 Hrs, Onboard Air Compressor S/N 00018

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

2021 Bandit 1425 Beast Recycler with Liquid Color Unit, Cat 125hp Diesel with 114hrs, 2” and 4” Screens. Width. 98 in. Height. 120 in. Length. 288 in. Weight. 12500 lbs. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Aiea, HI
NEF Equipment
855-251-2648
Call

$ 595,000

2017 Bandit Beast 4680T -1800 hours -1050 hp Cat c27 -Spare New Screens -48 tooth mill -New overband magnet -Newer discharge belt

Josh Digirolamo
828-302-7264
Call

$ 525,000

2010 horizontal grinder/chipper mobile track 2800 hours New twin Disc clutch New conveyor New 3 stage pump New cutter mill drive belts Currently mill is converted to chip knives Have all cutterbodies, teeth, screens and gate to convert to grinding.

Carolina Used Machinery
828-773-2204
Call

Call for Price

New 2023 BANDIT 1425 14"" Beast Grinder Includes the Following: - Cat C3.4 Engine with 120HP - 25"" Wide Feed - 40 Gallon Hydraulic Tank - 30 Gallon Fuel Tank - Remote Hydraulic Oil cooler & Cover - Standard Bandit Green Paint - NACD Manual Clutch - Radio Kit with Remote - Steel Chain infeed conveyor - Tandem Axle with Air Brakes - Bolt on Aluminum Fenders - Magnetic Head Pulley on Discharge w/ Steel Collector Pan - Non-Adjustable discharge w/ 7' height - Grinder Cutterhead with Rakers - Equipped with double short shingle teeth - Installed: 3"" Diamond Screen - Shipped Loose: 2"" Diamond Screen - Shipped Loose: 4"" Mod Diamond Screen - Shipped Loose: Extra Shingle and Blunt nose teeth 5 YEAR/5000 HR PLATINUM WARRANTY (CAT ENGINES)

 Lake City, Fl
Quality Equipment & Parts
386-833-5458
Call

$ 630,000

2020 Bandit 3680T BEAST Tracked Horizontal Grinder - 1416 Engine Hours - 900 Grinding Hours - Cat C27 w/ 875 HP - PT Fluid Clutch - Remote Control - Automatic Greaser - Automatic Chain Oiler - On-board air compressor - Adjustable Discharge - 36"" Capacity - 30 Tooth Cutter mill This machine was just ran through by the Quality Equipment & Parts Service Department. Bandit dealer of 10 Years. - Infeed Chain: New Headshaft and Tailshaft, new bearings, some new infeed slats - New teeth & rakers on cuttermill - New Screen & Gate - New Poly slide boards on Primary Discharge - New Anvil Bar - On-board air compressor serviced - New grease lines

 Lake City, AL
Quality Equipment & Parts
386-833-5458
Call

Call for Price

2014 Bandit Beast 4680 Track Horizontal Grinder, Equipped with a Tier 2 CAT C-27 1050 HP Turbo Diesel Engine with 3,500 Hours, Reverse Fan ,Compressor , Magnetic Pulley Head on Shorter Length Discharge Chute , Additional Screens all sizes, Undercarriage 95% Wireless Remote Control with Tether Cord Electric Winch for screen installation... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 30,000

2014 Bandit 2550 Self Propelled Stump Cutter with Deutz 44 HP Diesel Engine, 1,450 Hours, Tether Cord Remote and Wireless Control, Dual Rear Wheels, Hydraulic Swing Speed, Two Speed Drive, Front Grading Blade, Ready for Work. Width: 35” (89cm) Height: 53” (135cm) Length: 120” (305cm) WEIGHT: Approximately 820kg Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

$ 339,900

2011 Bandit Beast Model 3680, Caterpillar Model C-18 765 HP Turbo Diesel with Only 2,300 Original Hours , Magnetic Head Pulley on Discharge Conveyor, , Air Compressor, Wireless Remoter Control,and Tether Cord Control, Autofeed Reverse System, Tri-Axle Unit with Hydraulic Tongue Jack with Air Brakes... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Blakeslee, PA
NEF Equipment
855-251-2648
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved