Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 479 of 506
10114 Results Found
Sort By 
$ 219,900

2015 Vermeer FT3001358 hours Can run carbide to chipper teeth

 Brainerd, MN
U.S. Equipment Sales
877-451-9525
Call

$ 815,000

2018 Vermeer HG2800 Cat C27 950HP Has Cat Engine Warranty to 6,000 Hours or Approx. 10-31-22 Approx 2600 Hours

Mitch Stevens
828-773-6986
Call

$ 510,000

2022 Vermeer WC2500TX -300 hours -Tier4f Cummins 600H.P -Microchip and Macro chip Drums available -Dual infeed conveyor Turn key unit !!!!!

Josh Digirolamo
828-302-7264
Call

$ 410,000

Hours-1,677 Serial Number- 1VRC312H8K1001097 Low-hour late model grinder That was used for regrind. The machine is very clean and straight for age and hours. Machine Has Full Factory Warranty Remaining Delivery is available at the buyer’s expense

Vernon Novak
828-773-6456
Call

$ 174,900

2019 Vermeer TR-5300 Trommel Screen, 2,200 Hours on Engine, New Sprockets and New Drive Chains, In excellent condition. Ready for Work. Weight 32,000 lbs Width (transport): 8.2 ft Length (transport): 39 ft Height (transport): 13.4 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Winchester, VA
NEF Equipment
855-251-2648
Call

Call for Price

2004 XL Specialized HG 6000 Vermeer Grinder Has a new end feed. Has less than 6000hrs ran on it. Has new hammers

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Versatech 78" Brush Grapple for Skid Steer - NEW

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

VERVILLE 95-VP-438SE-CCW-35/125 - 4-Station Bagger complete Automatic Bag Placement and Bag SealerComplete line that was used for wood shavings only. The line is in operation at the time of this write-up.The Verville VP438-CCW is a four-station compression bagging system designed for high-efficiency bagging operations. It features high tubes of 125", automatic plastic bag sealing, and the ability to handle bag sizes ranging from 11" x 17" to 30" high. This system is often used in industries like biomass and packaging. It also includes features like an oil tank heater and a modem for remote monitoring.Bagging Capacity: -- It can handle bag sizes ranging from 11" x 17" to 30" high. -- Automatic Features: Includes an automatic plastic bag sealer for seamless operations. -- Height: The system features high tubes of 130 inches, making it suitable for large-scale bagging needs. Additional Features: -- Comes equipped with an oil tank heater and a modem for remote monitoring, ensuring smooth and efficient performance.Included with the system: -- The control box is mounted on the side of the auto-bagger with the Allen-Bradley Panel View 550 unit. --The main 4-section bagger is 125 " tall. --The main master control cabinet, -- The long 45° screw auger to feed from the bottom of the sifter to the top of the bagger, -- The Cousins HP2100 plastic wrapper with a turn table to wrap full skids. -- The master hydraulic tank & pump arrangement with all hoses. -- The full sealed bag auto discharge conveyor belt & turning roller conveyor. --The sifter with the canvas wrap cover. -- The screw conveyor that runs from under the outside dust collection system rotary airlock drops the “good"; wood chips down to the 45° screw with the “light dust going out thru the screw conveyor into an open dump trunk outside.Total HP 75Price Includes Loading on a Truck

Mark Joel
800-374-5009 ext:355
Call

Call for Price

VERVILLE VP300 3-Station Bagging SystemSpecifications: -- Main motor: 25 HP -- High of Tubes 116" -- Bag Size 11" x 17" x Up to 30" Finish HighNote: Bin and Infeed auger/conveyor is not included.

Mark Joel
800-374-5009 ext:355
Call

Call for Price

VERVILLE 6-SCREW HOLDING BINSpecifications: -- (6) Motorized 14-1/2" Diameter Bottom Screw -- (1) Motorized 14-1/2" Diameter Exit Screw -- 11 Feet Long -- 16 Feet Wide -- 18 Feet High -- 12 Feet High Support LegsDismantled and Loaded on Truck

Mark Joel
800-374-5009 ext:355
Call

Call for Price

VERVILLE VP424-S-CCW BAGGING SYSTEM4-Station Compression Bagging SystemSpecifications & Includes: -- High Tubes of 116" -- Bag Size 11" x17" up to 30" High -- Automatic Plastic Bag Sealer -- Oil Tank Heater and Modem -- Supplied with Transformer for your VoltageLoaded on your Truck

Mark Joel
800-374-5009 ext:355
Call

Call for Price

4 Station Bagger

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Verville VP300 Bagger

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Verville VP400 Auto Bag Sealer Auto bag placer Tube size: 15.75" x 11.5" New air lines, contacts, sensors

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 40,000

Verville 4 Stage Bagging System. #C921 Located in WI.

 Sturgeon Lake, MN
L & L Sales
218-382-0898
Call

Call for Price

VESTIL EHLT-2464-2-55 Scissor Lift Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities.Safety features: -- Electric toe guard to protect pinch points during lowering of the table. -- Internal safety velocity fuse to maintain platform height in event of hose or fitting failure. -- Maintenance prop, and upper travel limit switch to stop table at maximum height. Specifications: -- 2,000 Lbs. lifting capacity. -- 2 HP totally enclosed electric motor. -- Platform size 24" x 64". -- Lowered height 7", raised height 55". -- 24V AC push button hand control. -- Hydraulic component rating of 3,000 PSI.

Bernie Straple
800-374-5009 ext:339
Call

$ 6,255

VESTIL EHLT-4896-4-56 Scissor Lift Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities.Safety features: -- Electric toe guard to protect pinch points during lowering of the table. -- Internal safety velocity fuse to maintain platform height in event of hose or fitting failure. -- Maintenance prop, and upper travel limit switch to stop table at maximum height. Specifications: -- 4,000 Lbs. lifting capacity. -- 2 HP totally enclosed electric motor. -- Platform size 48" x 96". -- Lowered height 8", raised height 56". -- 24V AC push button hand control. -- Hydraulic component rating of 3,000 PSI.

Bernie Straple
800-374-5009 ext:339
Call

Call for Price

VICKERS - 60 HP, ...Hydraulic Power PackHydraulic Power Pack with all the bells and whistles: VICKERS Pump & valves and a SENTINEL tank. Hydraulic Power Pack Includes -- Variable volume, pressure compensated, piston pump. -- Capacity: 8 Cu. in./rev. -- Pressure rating: 4,000 PSI. -- Driver: 60 HP Electric motor; 1,750 RPM. -- Reservoir: 200 Gal. -- Kidney Loop: Gear pump w/filter. -- Air-cooled Heat Exchanger. -- Return line filter. -- Liquid lever switch and temperature switch. -- Fluid inspection window.NOTE: This item was installed earlier but never used. Year of manufacturing is approximate.

Jim Reedy
800-374-5009 ext:455
Call

$ 78,000

VIET (BIESSE) OPERA 5-3.3 XLL Denibbing Sander with 53" Width Capacity:53" Width cap. Denibbing Sander with a patented combination of rollers and rotating/oscillating discs make the VIET Opera Sanding Machine the ideal finishing solution for entry doors, cabinet doors, drawer fronts, sheet goods, shutters, face frames, furniture, and much more. Ideal solution for all sanding applications including whitewood, stain, and sealer coats. Head Configuration: -- 1st Unit: (11) Rotating discs with Slide out system for easy setup. 15 HP Electronic Inverter. -- 2nd & 3rd Units: 300 mm dia. Roller Brushes (Hub for 36 strips). Oscillating System with electronic 7.5 HP inverter. Specifications: -- Working Width: 1,350 mm (53.15"). -- Constant Pass Line TM (Fixed Table). -- Working Height Opening: 200 mm (7.87"). -- Laser Electronic Positioning for working thickness. -- Min. processing thickness 3 mm, Max. processing thickness 200 mm. -- (2) Longitudinal rotating brush-backed sanding rollers. -- 5" Rotating sanding discs. -- Forward speed 3-16 m/Min. -- Vacuum Table with 5.5 HP Motor, Electronic System, IPC Control. -- 50-Shore Rubber Conveyor. -- Front & Rear Extension Rollers. -- Emergency stop.Equipped with: -- IPC Touch-screen control: Simple & user-friendly "TOUCH SCREEN" IPC control with a color monitor. This control system supports the management of all machine parameters. -- PC processor provides control and feedback information to the machine in real time. -- The software version can be configured for right and left-handed operation. -- Text-free user interface; icons facilitate the operator's task. -- Optional rotating blower attachment at the back to blow off dust particles as items come off the machine. -- Includes matching transformer for 600 V to 460 V.

Tony Cornacchione
800-374-5009 ext:432
Call

$ 28,300

VIET - S211 R+ KRT, 2-Head Wide Belt Sander43" Width. cap.: Drum and Combination head.Head Configuration:1st Head: 160 mm 6.3″ Helical grooved rubber drum. 25 HP motor2nd Head: 160 mm (6.3") Helical grooved rubber drum with a platen combination head., 25 HP motorSpecifications: -- Each heads are powered by a 25 HP motor. -- The heads can be programmed to pneumatically raise & lower along with the platen and do (3) sanding combinations (with the twist of a button). -- Digital height readout and a calibration unit to the left side of the conveyor. -- Conveyor speed is controlled via a variable frequency drive 2.5 HP . -- Max width: 43″. -- Max. height: 6-1/4". -- Variable speed conveyor belt drive from: 3 - 16 MPM (11 - 52 FPM).Equipped with & Features: -- Both heads are equipped with: 1,130 x 1900 mm (44-1/2" x 75"). -- Roller & pressure shoe holddowns. -- Pneumatic tension of sanding belts and feed conveyor. -- Load meter on main motor. -- Disc brake on main motor. -- Emergency stops front & back. -- Roller table extensions front & back.NOTE: This is an extremely low-hour 2012 BIESSE Viet S1 dual head 43″ calibrating Wide Belt Sander.

Joe Retzlaff
800-374-5009 ext:348
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved