Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 500 of 506
10114 Results Found
Sort By 
Call for Price

Woodcraft cut off saw, In & outfeed,(4) Air Stops.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 45,000

WOODLAND model K6 stationary traveling band mill with 2" wide blade to saw up to 30" diameter logs x 16' long. Includes edger or 1 man operation. Log stays stationery in 19 degree tilt position and 2" saw travels. Not used since installed. Includes complete hydraulic system and electric motors. Good condition

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

$ 55,000

2022 Woodlandia 200X LogRipper Sawmill. Used for 5 months. No pipe work or infeed deck. Blower is included. #C902

 Sturgeon Lake, MN
L & L Sales
218-382-0898
Call

$ 3,750

WOODMASTER 5076 SINGLE HEAD DRUM SANDER(1) Head, 52" width cap., 7.5 HP motor; the 6" dia. dynamically balanced hollow steel drum uses 4" wide Velcro adaptable abrasives (steel drum is covered with Velcro); 1/2 HP gear motor, variable conveyor feed speed 0 - 16 FPM. -- Complete with: (1) Infeed and (1) outfeed rubber covered holddown roller; (1) 5" dust port.

EX-FACTORY INC.
704-841-2001
Call

Call for Price

Woodmaster W725 Helical Head Planer 24” capacity 7.5 HP motor

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 19,000

DOT ready, good rubber and brakes.

Forestry First
855-588-7871 ext:1
Call

Call for Price

Woods 502M hardwood flooring machine

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 7,500

2000 Woods BH9000 Backhoe Attachment Was on Kubota M108S Good shape Work ready

Carolina Used Machinery
828-773-2204
Call

Call for Price

Woodsman 790 Grinder Power it how ever you want Was Running off a Diesel Power Unit.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 219,900

2007 Woodsman 337-FC Chipper with 900 Hours, Cat 540 HP Motor, All Factory Updates have been Completed. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Fairfield, ME
NEF Equipment
855-251-2648
Call

$ 92,500

2008 Woodsman 332 Whole Tree Chipper, Cummins 365 HP Turbo Diesel Engine ONLY 159 Hours, Twin Disc Clutch, Autofeed System, 20 x 36" Opening, Has 10' Infeed Conveyor, 1,500 Lbs, Tether Remote Control, Ready for the Woods. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

 Winchester, VA
NEF Equipment
855-251-2648
Call

$ 29,900

Woodsman Model 2018 Chipper SN: 45400956 Cummins 6BTA Automatic feed Works great

Mitch Stevens
828-773-6986
Call

Call for Price

Woodtech 16" Resaw with return conveyor

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 14,298

Woodtech QSG 650-R-RPA 24" Widebelt (2) Heads24" width cap, Drum, Combination HeadHead configuration1st Head: Contact roll2Nd Head: Combination head (Roller and Pad)Specifications -- 24" Widebelt Service Side: Left -- Working Thickness: 3-150mm -- Minimum Working Length: 460mm -- Feed Speed: 0-19m/miMachine Frame -- Built with rectangular profiled steel beams to give a very high rigidity to the frame;Main motors positioned inside the frame in a protected position -- Machine frame is connected by high strength hardware (8.8G), and welded for maximum rigidityEquipped with & Features -- V-belt drive from main motors to sanding heads, -- Disk brakes on each sanding drum for emergency stopFeed System -- Feed table is made of steel with a surface tolerance within 0.05mm; table polished to avoid wear of the internal side of the feed belt -- Table is heat treated for accuracy and durability -- Feed speed variable in continuous from 0-19m/minNote : Extra BeltsWoodtech Model QSG 650-R-RPA 24" Widebelt

Joe Retzlaff
800-374-5009 ext:348
Call

Call for Price

1994 Woodtech Bandsaw Model 816420

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

RipMaster400 with Auto skewing - Heavy Duty 60 HP Motor Touchscreen controls 2 movable blades Infeed System with Scanning ( We offer 3D rip optimization as well) Custom outfeeds available. 480V 3Phase Seimens Electronics

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Woodtech Heavy Duty Moulder Models: WTM-330 – 12” wide – available in 4, 5 or 6 head configurations.WTM-260- 10” wide – available in 4, 5 or 6 head configurations. WTM-230 – 9” wide – available in 4, 5 or 6 head configurations.WTM-200 – 7” wide – available in 4, 5 or 6 head configurations. Electrical Requirements: Operating voltage: 460 Volt/60Hz/3 Phase Features Available: Outboard bearings on WTM-330 Pneumatic hold-downs, and side pressurePLC controlled – LCD readout Heavy duty drive motorsBelt driven spindlesAuto Lubrication Optional: Automatic Infeed Table 7000 RPM 1st Spindle - 15 HP 2nd Spindle - 15HP 3rd Spindle - 15HP 4thSpindle - 255HP 5th Spindle - 25HP 6th Spindle - 15HP 480V 3Phase Schneider Electronics

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Woodtech Planer Sanders Touchscreen Operation Pneumatic Exclusion on the Planer head. Heavy Duty Planing head with anti kickback and pressure shoes - 30 HP 2 Sanding heads 1st sanding head Steel Drum - 30HP 2nd sanding head - Combi -head -rubber roll with Platen- 20 HP Dust Brush on the outfeed ABB electronics 480V 3phase Heavy duty heat treated frame

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Woodtech Modular Full Shop Dust Collection Sizes - 20,000- 77,000 CFM Negative airflow System - Keep the blowers clean, the sawdust or wood chips never damage the fans Multiple Blowers keep your system always running at optimal CFMs European Technology Grecon Spark Detection, All Pipe, Trunkline, and flex pipe included as a package NFPA rated Schneider Electronics

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Woodtech HD Horizontal Band SawMax. workpiece size: 300mmThickness of production board: 5–160mmWidth of conveyor belt: 375mmDiameter of saw wheel: 711mmFeeding speed: 0-15m/minHydraulic pressure: 50-60kg/cmSize of saw blade: 185” Length, 2” wide, 1.6mm thick Electrical Requirements: Voltage: 460V/60 HZ/3 phaseFull electrical load: 18.5 KWOverall dimension: 2800L x 2200W x 2000H

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved