sawmill Equipment For Sale

2007 Wood-Mizer LT300 3400 hours 3 phase Great condition Includes 80 new blades and upgraded steel spindles with new bearings

REDUCED TO SELL!! Wood-Mizer LT-300 W/ Infeed log deck, outfeed incline belt LT300, 3-way outfeed conveyor, includes extra blades, 9,400 hours - Wood-Mizer 24 x 19 belt outfeed conveyor and electric drive, S/N 10004089A2.00 - Wood-Mizer TD2D12 3-way separator, S/N 1004027A1.00 - Wood-Mizer 25.5’ (2) strand log infeed deck w/ hydraulic stop & load & hydraulic drive Complete mill (ref # 162) Call Amy for more information (928) 723-9449

Woodcraft cut off saw, In & outfeed,(4) Air Stops.

One man Woodland Band mill with a built-on K6 edger. This entire mill is in good condition. 30" Cooks band wheels, 64hp Kubota running hyd. & the edger, 46hp Kubota running the band, 2" band or 3'' if desired, extra edger blade, (carbide tipped),filters, some spare parts, a band sharpener & setter, THIS is a unique outfit 10' H 12' W with out motor 31' long to haul, there are videos on the web. Call 269-358-9015 for more info. [email protected]

WOODLAND model K6 stationary traveling band mill with 2" wide blade to saw up to 30" diameter logs x 16' long. Includes edger or 1 man operation. Log stays stationery in 19 degree tilt position and 2" saw travels. Not used since installed. Includes complete hydraulic system and electric motors. Good condition

2022 Woodlandia 200X LogRipper Sawmill. Used for 5 months. No pipe work or infeed deck. Blower is included. #C902

Woodtech Modular Full Shop Dust Collection Sizes - 20,000- 77,000 CFM Negative airflow System - Keep the blowers clean, the sawdust or wood chips never damage the fans Multiple Blowers keep your system always running at optimal CFMs European Technology Grecon Spark Detection, All Pipe, Trunkline, and flex pipe included as a package NFPA rated Schneider Electronics

Woodtech HD Horizontal Band Saw Max. workpiece size: 300mm Thickness of production board: 5–160mm Width of conveyor belt: 375mm Diameter of saw wheel: 711mm Feeding speed: 0-15m/min Hydraulic pressure: 50-60kg/cm Size of saw blade: 185” Length, 2” wide, 1.6mm thick Electrical Requirements: Voltage: 460V/60 HZ/3 phase Full electrical load: 18.5 KW Overall dimension: 2800L x 2200W x 2000H

Worthington Rollair 50HP Screw Compressor

Automatic dual side grinder for carbide tipped circle saws. 480 V 3 phase.

WW Meyers Airlock/Feeder 1HP 3Phase Motor

YALE OSO-30 Order Picker Fork Lift3,000 Lbs Cap. Narrow aisle electric order picker, powered by 24 Volt Battery. -- 3-Stage mast, max. lift height 212" and 89" lowered. -- Equipped with 4" x 42" x 19" between forks, power steering, overhead guard, comes with extra battery and battery charger. -- Used for 2,063 hours.

YALE OSO-30 Stand UP Order Picker Fork Lift with ChargerSpecifications: -- Capacity: 3,000 Lbs -- Mast: 3-Stage -- Power: 24 volt battery -- Max. lift height 212" / 89" loweredEquipped with: -- Power steering -- 4" x 42" x 19" between forks -- Overhead guard -- Battery charger

16 ton electric Yale/ Ingersoll-Rand chain hoist / Chester hoist, low head room hoist, unused 32,000 lbs powered trolley overhead crane hoist, Yale overhead crane unused, Columbus Mckinnon –Baldor motors, 230/460 volt, 3 phase, never used 16 ton Chester hoist, overhead crane, 16 ton overhead hoist Shipping dimensions: 72” wide x 56” deep x 40” tall, Weight 2850 lbs. stored inside our climate- controlled warehouse Contact us for a delivered price PRICE INCLUDES FREE SHIPPING TO LOWER 48 STATES USA., SELLER WILL ARRANGE AND PAY FOR SHIPPING, BUYER IS RESPONSIBLE FOR UNLOADING ITEM. ADDITIONAL TIME MAY BE REQUIRED TO ARRANGE SHIPPING AND FOR DRIVER DELIVERY TIME. PLEASE CONTACT US FOR SHIPPING AND DELIVERY TIME.

YAMANI Band Resaw - 1997 model SF800 vertical band resaw with adjustable fence and powered feed rolls. Built in blower to remove sawdust. Numerous bands included.

(3) Yaskawa V-1000 VFD, ABB, Fuji AF-300P11 25Hp Max

Yates American V60 52" Band Head Rig Line Bar. S/N 22098

The seller has confirmed that this Yates American resaw was in working/running condition when it was pulled from production. It is ready to load! - Vertical resaw - All parts and blades included - Approximately 35 years old - 50-60HP - 440 amp

Yuasa saw analyzer, great working condition comes with saw centers, magnifying camera and monitor.

ZAFFARONI MSR 160 P BS/PD MULTI-BLADE PANEL SAW (W/TOP & BOTTOM ARBORS): -- SpecificationsZAFFARONI is the "Top of the Line" in Precision Multi-Rip Saws for Panels. Blade Depth is mechanically adjustable with a tolerance of +/- 0.01 mm (0.0004").The Saw is so precise it can also be used for V-Grooving.The Saw blades project through the table from above & below. A double-row of hold-down wheels are mounted above the saw, with (28) adjustable rollers to prevent contact with the blade.The Top & Bottom shafts & wheels are connected by a quick flange system that can be removed/replaced without dismounting the bearing collars.Motorized adjustment of the depth of the saw blade projection by the touch-screen operating control(4) motorized & self-adjusting (according to material thickness) upper rubber coated rollers with grooves,(4) Idle lower polyethylene coated rollers & (1) Pair of ejector rollers at the output of the machine.Automatic locking and unlocking arbor shaft with HSK collector on the LH side controlled with electro-pneumatic device for the automatic cleaning of the coupling Safety device that features a presence and positioning sensor of the shaft; closed circuit air cooling device for the shaft bearingsSaw Blade work table with interchangeable MDF inserts.Technical Characteristics: -- Working Width is 1,600 mm (63"). -- Max. panel pass through is 1,780 mm (70"), min. length is (450 mm) 17.7". -- Motorized thickness adjustment from 0 - 70 mm (2.7"). -- Adjustable projection of the saw blades from the working from 0 - 62 mm (0" - 2.4") with circular saw blades or hogger trimmer up to 280 mm dia. (11"). -- Working table height is variable, from 970 - 1270 mm (38" - 50"). -- Material Feed Speed from 3 - 45 MPM (9.8 - 147.6 FPM). -- Main Motor Power is 45 kW (60 HP) with toothed Belt Drive arbor. -- Saw Blade arbor 80 mm dia. x 1,310 mm (3-1/8" x 51-1/2"), with double-tangs and automatic anti-rotation locking clutch. -- Blade Arbor Speed of 4,000 RPM.Machine Features: -- Opening of the roller group through pneumatic cylinder with timer interlock for safety. -- Safety protection hood with sound absorbing materials to conform to ISO 7960/95 Norm. -- PLC Logic touch screen control with digital communications through profibus cable.Spacer Sets: Machine requires Spacer Sets and Saw Blades (not included); pricing is available on request.Examples:width from......1 - 10 mm ...$ 25.45width from.....11 - 25 mm ...$ 30.15width from.....26 - 50 mm ...$ 35.60width from.....51 - 75 mm ...$ 40.15width from.....76 - 100 mm ...$ 45.20width from...101 - 125 mm ...$ 49.75width from...126 - 150 mm ...$ 54.90Example of productivity:Approx. 240 panels/hour running the machine at 49 FPM (15MPM) – considering to load 4 panels/minute) & a change-over time of approx. 10 minutes.