sawmill Equipment For Sale
.gif)
3817 Results Found
Schneeberger 9 Sculptor Profile GrinderSwiss Made, Schneeberger Automated High Precision Grinder for Finger Joint, router bits, saw blades, straight and milling Cutters. Specifications -- Grinding Motor: 1,500 - 3,000 RPM. -- Cooling Pump: 2,800 RPM. -- Grinding Wheel Speed: 3,000 - 6,000 RPM. -- Grinding Wheel Diameter: 50 - 200 mm. Grinding Wheel Bore: 30 mm. -- Cross Travel of Grinding Wheel: 200 mm. Vertical Travel of Grinding Wheel: 400 mm. -- Grinding Head: Swivel-able. -- Worktable Travel: 400 mm. -- Coolant Capacity: 25 liters. -- Dimensions: 1,226 mm Lenght x 1,160 mm width x 1,180 mm height; Weight - 320 kG.10" Width cap., 11.5" dia., max. profile depth 5.5", radial clearance angle up to 35ø, lateral clearance angle up to 15øEquipped with & Features; -- 2 HP - 1,500 RPM motor, variable grinding speed 2,000 - 4,000 RPM, three sided full jet cooling. -- All std. grinding equipment for HSS grinding, 1-1/2" spindle arbor, (2) wheel flanges, (1) knife holder, dresser.
$ 40,000
4"x 48" capacity. Electric drive on feed rollers. Incudes control panel. Air cylinders on press down rollers. Single arbor. 4-22" blades all movable. 4- laser lights. Lubrication system panel. 125 HP electric motor. 200-600V 180 amp soft start. Infee, outfeed roll case is loaded with what is needed, 10 HP. Hyd. pack CALL 740-799-7101 ext.2 This machine has moving parts that are not mentioned. It is loaded to run production.
Call for Price
SCHURMAN MDL 8 DAS 30 DBL ARBOR GANG EDGER; (2) 75HP MTRS
Call for Price
SCHURMAN SINGLE ARBOR GANG SAW 6" x 60"
Call for Price
Shurman 6SBA 42 S/N 1171 Gang Edger with 150Hp Motor
$ 64,500
10D G60 thin kerf double arbor schurman gang edger; this item belongs with stock #729, which is also listed in our equipment for sale. Call Jeff at 574-370-5050 for more info.
$ 41,000
Belt, drive system, edger guide system -Call Jeff for more info at 574-370-5050
$ 14,050
Infeed to 10" Schurman gang edger; this item belongs with stock #727, which is also listed in our equipment for sale. - Call Jeff for more info at 574-370-5050
Call for Price
Schurman Gang Saw Infeed Positioner
$ 38,500
Schurman 6TA48 Combination Edger SN: 2121 3 phase 480 volt (2) 200 HP motors
Call for Price
9' Sherman Transfer Deck, 16' wide with H78A roof top chain, gear reduction drive, 16' jump up roll case, (9) 24"x6" rolls
$ 17,250
6"x42" wide overall, includes infeed and outfeed rollers, working condition
Call for Price
Schutte model 280.100 Hammer Mill Includes: 125 HP Motor - 480v Includes: (3) Screens: Approx 1", 3/4", 3/8" (to be confirmed) Includes: Stand
Shutte - Buffalo waste grinder, 18" wide, top feed, 3600 rpm's, includes numerous spare parts, good condition and recently in production
18"wide. In very good working condition, There is no power included. Works good to run waste wood thru. Call or write for info Levi Beechy E9050 Carlson Ridge Rd. Westby, WI. 54667 or Call 574 536 1646
Call for Price
Schutte Hammer Mill #40 S/N 111375-R
Call for Price
Grinder. This machine is a Shutte grinder. With Webster vibratory infeed. Item #C625
Schutte Pallet Hog - Model 56-35 heavy duty horizontal hog. Features 50 inch wide horizontal feed opening with top and bottom powered rolls; 50 2-way, reversible swinging hammers with hardsurfaced tips ; 250 HP direct drive electric motor; 3/4" thick screen with 1-3/8" diameter holes; Rear discharge. Electrical cabinets included. Hammers are approximately 1-3/4" x 5" x 8". Serial #0506071.
Schutte horizontal hog, replaced shaft w/ blower & motor, heavy duty design (ref #162) Call Amy for more information (928) 723-9449
Call for Price
Schutte Hammer Mill 40-HZF with 100HP Electric Motor. No. 172 Attached Blower.