sawmill Equipment For Sale

SIERRA - 700T: Shear BalerSpecifications: -- Motors: (2) Electric 100 HP. -- Preload Table. -- Precompression. -- Shearing: 14 - 17 Tons per hour. -- Baling: 12 - 14 Tons per hour. -- Logging: 15 - 17 Tons per hour. -- Cylinders: (1) Main Compression ram; (6) folding box rams. -- Cylinder forces: Shear - 700 tons precompression; 115 tons main compression; 160 tons folding box; (6) cylinders @ 80 tons each; 240 tons each side. -- Folding Box Dimensions: 19 Ft. x 8 in. x 7-2/3 ft. Open: 19 Ft.; 8 in. x 32 in. x 24 in. Closed: 34 In. x 22 in.Shear Throat -- Disassembled approx. (3) years ago. -- Running when removed from service.

SIERRA - RB5000, ...Portable Baler/LoggerNew in 2011 - Less than 500 hoursFeatures and Specifications: -- Faster cycle times equals higher production volume. -- Features an easy-to-load loading box that opens to 16’-5"; x 8’-1"; and short-stroke rams that greatly reduce cycle times. These powerful rams crush each load with 240 tons of force per side, producing:Logging production: 16 - 22 Tons per hourBaling production: 10 - 14 Tons per hour -- The "RB5000" is the perfect machine for any scrap yard that receives appliances, sheet iron, smaller automobiles & automobile shells, clips, and busheling as their main source of material. -- The "RB5000" Portable Baler/Logger compresses logs and bales to shredder and mill specifications. -- Typical log density: 25 to 35 Lbs. per cubic foot. Average overall weight: 1400 lbs. -- Typical bale density: 80 to 90 lbs. per cubic foot. Average overall weight: 850 lbs. -- Any transfer station that receives a high volume of appliances and sheet iron can also greatly reduce freight costs by baling and logging. -- The structural details and proper design protect the key components of the "RB5000". -- The solid self-framed construction of this portable baler/logger includes SIERRA’s: Standard L-box shaped design, 11/16th-inch abrasion-resistant steel Hardox 450 liner plates, and outer honeycomb construction creating a greater box integrity and adding to the "RB5000’s" longevity. -- For added versatility, the Crane is independent of the Baler, has a continuous rotation, and is fully operational while the Baler/Logger is in use, increasing productivity. -- The Crane features 24-2/3 Ft. boom length and 4,400 Lbs capacity while fully extended and includes an orange peel grapple with a rotator that was specifically designed to handle bales and logs. The well-designed cab and agronomical controls were designed for comfort, safety, and long-term use.

SIERRA REB 2-250 TWO RAM BALER --New in 2020Specifications per factory: --The Sierra REB-2 two-ram baler was a machine designed by recyclers, for recyclers and is the ultimate machine for any high volume or high production facility. Available with either a 150 or 250 HP power unit, it has the ability to process a wider variety of materials at a higher rate of production and will ensure your return on your investment. The REB-2 has a unique shear blade that works on waste, fiber, non-ferrous scrap metal, and tires, so there is no need to choose between one material or the other. --To eliminate material contamination when changing materials, the REB-2 features an innovative bale eject and oversized bale release door combined with full ejection of bales. This feature also produces better bale integrity, especially on materials with lots of memory. --The standard features on the REB-2 two-ram baler gives it unmatched performance and versatility as well, expertly handling a wide range of recyclable materials:MSWUBCPETOCCONPHigh gradesAluminumNon-ferrous metalsTires MAIN MOTORS: 2 @ 125HP/480V/3PH/60HZ/TEFC• ELECTRICAL SERVICE: 480V 500 AMP• MATERIAL SETUP: 16 MATERIALS WITH 15 BALING PARAMETERS PER MATERIAL (SAVE, RESTORE AND RESET FACTORY DEFAULTS)POWER HYDRAULIC• SYSTEM OPERATING PRESSURE: 4500 PSI• SHEAR/BALING FORCE: 254 TONS• RAM-FACE PRESSURE: 304 PSI• MAIN PUMP FLOW: 564 GPM• PUMP: KAWASAKI PISTON/ VICKERS VANE• OIL FILTRATION: 5µ RETURN LINE, 3µ KIDNEY LOOP• MAIN CYLINDER: 12"; BORE - 254 TONS• EJECT CYLINDER: 8"; BORE - 113 TONS• DOOR CYLINDER: 7"; BORE - 87 TONS• RESERVOIR CAPACITY: 1400 GALLONS

SIERRA - RB6000, ...Baler/Logger - New in 2008Electric with approx 12,500 hoursThe RB6000’s automatic baling and logging cycles keep you at peak efficiency. Baling: 12 - 16 Tons per hourLogging: 18 - 22 Tons per hourAutomobile Logging: 26 - 32 Tons per hourThe RB6000 baler/logger is a beast on automobiles, appliances, and lightweight sheet iron; producing logs with the density you need to meet max weight. Looking to produce mil-spec bales?The RB6000’s cylinder comes within 18 inches of each other allowing you to densely bale clips and busheling to mill specifications.Average Bale and Log specifications:Bales: Size (40 in. X 24 in. X Variable), Weight (850 lbs.)Logs: Size (40 in. X 24 in. X Variable), Weight (1200 - 1400 lbs.)

SIERRA - T715SLK, ...Shear BalerApprox 9,000 Hours Specifications: -- POWER • CUMMINS 6 CYLINDER TURBO DIESEL TIER IV --CYLINDER FORCES • SHEAR, 2 CYLINDERS - 715 TONS • PRE-COMPRESSION - 115 TONS • MAIN COMPRESSION, 170 TONS • FOLDING BOX, 6 CYLINDERS - 270 TONS EACH SIDE --FEATURES • MANUAL AND AUTOMATIC SHEARING, BALING AND LOGGING CYCLES • REMOTE CONTROL • FOUR HYDRAULIC LEGS --HYDRAULICS • REXROTH VARIABLE DISPLACEMENT PISTON PUMP • DENISON VANE PUMP FOR EXTRA SPEED • 150 GALLONS PER MINUTE • MAXIMUM OPERATING PRESSURE OF 4500 PSI • 100% FILTRATION WITH 10 MICRON FILTERS • COMPLETE SYSTEM RELIEF PROTECTION • DIRECTIONAL VALVES ELECTRONICALLY OPERATED • ELECTRIC PANEL WITH PLC • HYDRAULIC OIL COOLING SYSTEM • AUTO-LUBE FOR SHEAR HEAD & PRE-COMPRESSION • HYDRAULIC TANK CAPACITY - 700 GALLONS

Only 6-8 fans available Building not included

(9) Sets of Six Dry Kiln Controls

Simonds Circular Leveler KRO970

Simonds RMO 942 Auto Leveler 480V Excellent Condition

Simonds Optimatic RMO 880 Band Leveler 11954 Hrs S/N 94 880 201

Simonds Optimatic RMO 880 Automatic Band Leveler with Controls

Simonds Optimatic RMO 940 Band Blade Sharpener

Excellent condition

480v 3p, 4"x6", Single Head, 2017

Smicksburg vertical band head-rig, line-shaft ready, includes skid of spare parts and is ready for production

30" dia Cambio ring debarker, 6 arms, steel infeed press wheels, all electric, all electrical and controls included, recently in production and in good working condition, infeed/ outfeed also available, call for price

30" Cambio 5 arm ring debarker, electric drive, includes infeed/ outfeed log troughs and all controls, in good condition and ready for production

56" 6K Soderhamn Chipper with 5x5 Screen & Blowers. #00894

Soderham Chip Pack 48"

SODERHAMN 5' X 5' rotary screen with drive and screen plates. Offered as-is-/ where-is but loaded on your truck.