sawmill Equipment For Sale

20' Tailor Made Double End Trim Saw

Taylor Forklift, runs & works good

TB Woods 150HP Soft Start

10 HP 575 volt unit. Has between 25-27 CFM. RPM: 1745

CMS represents Big on Dry (BOD) Thermo Wood Kilns in the USA. This system is another on elf our customers in the USA who is producing mostly poplar and oak decking. Big on Dry has improved the Thermo-Modification process with their THERMOWOOD (THW) line and provides complete "turn key" systems. The PLC control systems allow programming for a wide variety off wood applications. This allows the same systems to work with very delicate wood that is hard to treat to thicker wood that will be used for outdoor products. The THW system can also be used as a conventional kiln with steam. Basic systems include: - Kiln completely built with stainless steel and aluminum - Initial humidy of 10-15% is reduced to 5-6% - Loading options: Side or Trolley - Heating options: Gas or Wood Burner - Humidification: Combined Spraying System

THOMAS TURNBAK Return Conveyor for EdgebandersTHOMAS "Turnbak" 90" L x 120" W Automatic Return Conveyor: Left-hand feed, right-hand return layout. - Adjustable table pass-line, 32" to 38" height. -- Infeed Receiving Conveyor: 90" L x 120" W with 49" W; line-shaft PVC covered rollers. Rollers 1-7/8" dia. on 4" centers. -- Return Conveyor: (3) Sections; 84" L x 49" W, and (1) section 60" L x 49" W; powered return conveyor; line shaft driven; PVC covered rollers. -- Transfer Table: Pneumatic actuated automatic table pop-up with photo-eyes. (12) 1/2" Dia. rubber cross conveyor belts (dimensions 90" L x 49" W). -- (3) Transfer belts need replacing. -- Includes: (1) Section of 48" L x 49" W; non-powered Return Conveyor. -- LEESON Inverter with: 2 HP LEESON Motor. -- With: Adjustable control system and operator manual. -- The transfer process occurs on a continuous basis. -- (3) Transfer belts need replacing. NOTE: Needs(3) Transfer Belts; actual model number: 90 x 120 4C

THOMAS MFG TURNBAK R1 70x96 Return Conveyor System:Line shaft powered roller (PVC covered) for LEFT-HAND Feed & RIGHT-HAND Return Conveyor System. Specifications: -- 70" Long x 96" Wide receiving table; transfer system will handle a panel 96" long x 62" wide max. size (min. 6" x 6"); -- Variable speed up to 120 FPM. -- Automatically receives-and-transfers panel with (10) transfer belts onto the return side and onto a 36" wide & 96" long return conveyor. (approx. 8' long) which conveys panel back to the operator. -- Variable speed from 0 - 120 FPM. -- NOTE: Was previously attached to & used with a 2014 Biesse Akron 1440A Edgebander, see EXF Listing ..."EO-012637"

Thompson Lane Saw Guide Milling Machine

thompson-Lane Saw Guide Milling Machine S/N 9 3 1

TIERNEY 10" Gang Saw

Tierney 24" Gang With In & Out feed 300HP

2021 Timber Buddy Mill Operation Comparable to a Wood-Mizer LT70 Kauffman's laser edger 2 strand log deck like new Roller transfer deck like new

Timber Treatment Solutions (TTS) manufacturers specialized timber treatment and preservation equipment. These systems are engineered to our specific customers specifications and applications. The TTS systems are turn key with installation and service available. - High Pressure Impregnation Plants - Low Pressure Impregnation Plants - Automated Material Handling Systems - Dip Tanks - Automation available - Hot Oil Treatment - Treatment Tunnels for individual lieces - Timber Incising Machines - Automation and control systems

Timber Treatment Solutions impregnation plants can all be fitted with one of our automated timber handling systems. An automated wood handling and storage system is the best option for treating large volumes of timber in a short space of time due to minimising charge changeover times. This makes annual impregnation volumes of over 100,000m3 on a single plant easily achievable. The automated handling system can consist of anything from a transfer car which changes over one charge automatically to a multi-lane multi-level fully automatic system which only requires operator input once per day. Timber Treatment Solutions are the only manufacturer able to offer the patent pending multi-level timber handling and storage system, which can half or even third the building space required for an automated wood package handling system. There are lots of possible configurations and our teams will be able to advise the most suitable for you, according to your needs and budget.

Timber Treatment Solutions has many years’ experience in designing and manufacturing timber dipping equipment making our products the most advanced on the market. We are unrivalled in the quality of fabrication and reliability. Our automatic dipping tanks provide a rapid, completely safe treatment process for both the operator and the environment. A robust design and construction ensures the longevity of our products. The dipping tank systems generally include: – - a tank for dipping the timber - a hydraulically raised and lowered support frame to place the timber packs on - a manual or hydraulically operated top clamp There are also several additional options which can be added to further improve the performance of the dipping equipment: – - multiple dipping frames in the same tank to increase throughput - roof structure to protect against water ingress - tilting support frame to aid preservative run off - preservative dosing / mixing system - filtration of sawdust - stirring to homogenize the concentration of chemicals in the tank - heating

Timber Treatment Solutions designs and manufactures turnkey high pressure wood treatment plants for impregnating timber to Use Class 3, Use Class 4 and a variety of other requirements. These plants generally include: – - an autoclave with quick closing door(s) - one or several tanks to store the treatment chemical - a process skid, with all necessary pumps, valves, and pipes - a timber pack handling system, from completely manual to fully automated - a mixing / dosing system - a PC or HMI based control system with our latest plant operating system There are lots of possible configurations, and our teams will be able to advise the most suitable high pressure wood treatment plant for you, according to your needs and budget. Plants can be designed for any of the processes required by the timber impregnation industry: – - Bethel (full cell) – this is the most common for treatment of timber to Use Class 3 and 4 - Rueping (empty cell) – this process cycle is used for more specialist lumber treatments, such as creosote and copper oil, where the impregnation rate needs to be reduced on highly absorbent wood species - Lowry - Special cycles using any combination of vacuum, air pressure & fluid pressure phases, which can be designed on request WHEN TO USE HIGH PRESSURE IMPREGNATION High pressure treatment is widely used whenever deep impregnation of wood by a preservative required: – - Sawn or round posts using water-based copper chemicals (UC3 / UC4) - Poles, sleepers, posts using Creosote, Creosote/Oil mix, CuNap & Copper Oil - Construction timber with fire retardant chemical - For specific applications, such as resin or furfural impregnation before curing

Timber Treatment Solutions designs and manufactures turnkey low pressure wood treatment plants of any size which are suitable for use with any of the existing treatment chemicals on the market, whether they are water based or solvent based. These plants generally include: – - Autoclave or rectangular vessel with quick closing door(s) - One or several tanks to store the treatment chemical - Process skid, with all necessary pumps, valves, and pipes - Timber pack handling system, from completely manual to fully automated - Mixing / Dosing System - PC or HMI based control system with our latest plant operating system There are lots of possible configurations of low pressure plant, and our teams will be able to advise the most suitable for you, according to your needs and budget. Plants can be designed for any of the processes usually required by wood impregnation industry, such as Double Vacuum & Envelope WHEN TO USE LOW PRESSURE TREATMENT? Low pressure treatment is widely used, whenever light impregnation of wood by a preservative is required (also called surface treatment or envelope treatment): - To impregnate timber for Use Class 1, such as timbers that will remain dry (e.g. upper floor joists, truss rafters) - To impregnate timber for Use Class 2, such as timbers that are exposed to a slight risk of wetting or damp (e.g. tile battens, CLS framing) - To impregnate construction timber with fire retardant chemical

Timber King T-802 Edger -22hp Kubota diesel engine -2 blades -Built in metal skids Works as it should!!!!

2016 Timberking 2200 Sawmill -Less than 600 hours -49hp Kubota diesel engine -About 40 blades come with mill. -Very good sawmill runs and operates as it should -All hydraulics

The TimberKing 1400 is a used band mill sawmill designed for efficiency and portability. Manufactured in 2018, this mid-sized all-hydraulic model offers reliable performance for those needing a versatile and mobile solution. As a portable machine, it is ideal for various milling operations, allowing easy transport to different sites. This TimberKing 1400 Band Mill is engineered with thin kerf technology, which provides precise cuts while minimizing waste, making it an excellent choice for optimizing lumber yield. It features all-hydraulic components, enhancing its usability by simplifying log handling and cutting processes. Equipped with a serial number of 2502, this unit assures buyers of its legitimacy and traceability. Overall, the TimberKing 1400 combines portability, high efficiency, and hydraulic control in a compact unit, suiting professionals who seek a dependable solution for on-site milling projects.