sawmill Equipment For Sale

Double head Morgan Bandsaw with Return. #C001

Morgan merchandizer 32” blade 20 HP motor 10 HP hydraulic pack 4” chain and 18’ trough 3 strand deck 12.6” wide x 11” long Includes 40’ log trough with 4-arm kicker, double chain with 2 ½ links. Ready to load

Morgan Descrambler 8’ wide x 7‘ long Gear box No motor Ready to load

Morgan Scragg Mate Edger 20hp on Saw Arbors

Morgan 2Saw 16' Trimsaw Line. With in-feed Coveyors. Located in GA. #C959

Morgan Double End Trim Saw

Morgan 2 Saw Edger

MULTIQUIP GENERATO MODEL DH-04801 45KW GENERATOR IS ON A 2004 DUOLIFT TRAILER WITH ON BOARD FUEL TANK LOW VERY QUIET GENERATOR

Multitek 40KW Generators: 40KW 3-phase 240 volt generators (8 available). All have approximately 27 hours of testing. These are new units available for $16,000 each.

Murphy Rogers MRT-12AS Dust Collector

MURPHY-RODGERS MRJ-610-122 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 8,500 CFM approx. @ 9 to 1 air to cloth ratio baghouse dust collector with (60) 10-feet long filters; total cloth area of 943 sq. ft. -- Filter Cleaning: Continuous Self-cleaning Using Compressed Air. -- Main Fan: 30 HP top-mounted blower motor. with approx 18" dia. inlet. --System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, top safety railing, and approx. 16" Rotary Air Lock.Actual model is MRJ 610 -122.

MURPHY-RODGERS MRZ 17/16L Interior/Open 6 Bag Dust Collector with Auger and Rotary Air Lock General specs: Approx. 7,600 CFM @ 8" SP. (6) top filter bags @ 24" dia. by 72" long. (6) bottom disposable plastic dust storage bags. -- Fan/Motor: 25 HP BALDOR TEFC motor direct driven fan with electrical starter. 17" diameter inlet, with lifting hooks. The bag collector motor is brand new and has never been powered on or fired up. -- Comes with: Main approx. 17" dia trunk line, shut-off, and Quick clamp removal for filter and plastic bags. -- All steel construction with rugged support legs. Air Deflectors allows operator to adjust the air flow and amount of waste evenly into the 6 waste bags. -- Note: NFPA 664 (Fire Code) states that a max. of 5,000 CFM is limit allowed for indoor enclosure-less dust collectors.

Murphy Rogers MRM-16-185H Shaker Dust Collector 16” dia. inlet 25 hp exhauster motor 81 filters 6” dia. x 68” lg 668 sq/ft of filter 6,000 cfm estimated capacity Serial Number: 1020

NEDERMAN - NFSZ 3000-2: Modular Filter with Two Modules, Variable Frequency Drive & Rotary Air Lock Waste Discharge 12,000 CFM Approx. @ 6.56 to 1 air-to-cloth ratio; negative pressure; expandable Heavy-Duty Baghouse Dust Collector System.Designed for: Small to medium-sized air flows with large material concentration (dust loading).Specifications -- Total 1,830 sq./ft. (170 sq./m) of filter area; total of (100) filter bags. - Each module contains: (50) Filter bags @ 915 sq./ft. filter area per module. -- Consists of (2) Filter module sections with: Combined explosion & access door in each section; each with: 2 HP Regenerative Fans for cleaning of filter media. -- Unit is ATEX rated. Hopper for collected material to Rotary Air Lock (RAL) discharging into a waste bin (bin not included). -- Equipped with: (1) Ground-mounted 50 HP - 1,800 RPM TEFC direct drive motor with: VAGON Variable Frequency Drive & NEDERMAN "R56-500-0" Blower Package with: 20" Inlet pipe to fan inlet box.Filter housings are under negative pressure and fan is mounted on the clean air side. -- Fan Capable of approx. 14,600 CFM; motor & fan are a common steel base/frame with ground level installation. -- Features & Includes: Variable Speed motor drive; includes: Certificate of Conformity for Components (USDecla034US-B); Support Stand. -- Complete with: (2) Separate electrical panels. - For VFD Drive & Control panel: Remaining starters and controls. Drain with plug: Quick open access doors and inlet flange. -- Includes: Approx. 22" outside pipe filter header to fan inlet; square to round fan discharge adaptor; approx. 10' high support steel structure. -- Baghouse Dimensions are: 94.5 x 94.5" (2400 x 2,400 mm) for the two modules.Height of baghouse shell: Approx. 167" (4,250 mm), not including support legs. -- Actual model: NFSZ 3000 2HJ

NEDERMAN S-1000 BAG FILTER Dust Collector. The NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. It's the ideal solution for a smaller shop or single work-cell operation.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 360 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 16". Available in 208/230/460 V, 60 Cy, 3 Ph. Must specify Voltage at time of orderAvailable option:- Aluminum Impeller: - 45 Gallon Drum Discharge - Single Drum (3 REQUIRED)- 230 Gallon Dump Bin: Available spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN S-500 BAG HOUSE DUST COLLECTOR. -- Open Bag house designed for interior application; 5 HP TEFC material fan motor, 1,750 RPM; free standing 2,000 CFM open frame bag house, 162 sq. ft. of filter area via (16) beane material filter bags; 7.5" W.G. static pressure. -- Bottom discharge into (2) plastic waste collection bag. -- Includes: Side-mounted blower assembly with support legs; (2) quick disconnect clamps for the plastic bags. Starter motor with push buttons. Option:42 Gallons Drum Discharge, Single Drum (2 REQUIRED FOR COMPLETE S-500)

NEDERMAN S-750 BAG FILTER Dust Collector. The NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- Specifications: 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 11". -- Available in 208/230 or 480 V, 60 Cy, 3 Ph. Must specify voltage at the time of orderAvailable options:42 Gallons Drum Discharge - Single Drum (3 REQUIRED)230 Gallon Dump Bin

NEDERMAN S-1000 BAG FILTER Dust Collector w/ Auto Bag ShakerThe NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. It's the ideal solution for a smaller shop or single work-cell operation.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 360 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 16". Includes: -- Auto Bag ShakerAvailable in 208/230/460 V, 60 Cy, 3 Ph. Must specify Voltage at time of orderAvailable option:- Aluminum Impeller: - 45 Gallon Drum Discharge - Single Drum (3 REQUIRED)- 230 Gallon Dump Bin: Available spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN S-750 BAG FILTER Dust Collector w/ Auto Bag ShakerThe NEDERMAN S-Series Baghouse Dust Collector is quick to install and easy to operate. With a 7.5 HP motor and a 4,500 CFM @ 6" WG it's the ideal solution for the small shop or single work-cell operation. -- Specifications: 7.5 HP - 1,750 RPM TEFC Motor, (24) Beane material filter bags and magnetic starter. -- Features: 243 Sq/ft of filter media, easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 11". -- Available in 208/230 or 480 V, 60 Cy, 3 Ph. Must specify voltage at the time of orderIncludes: -- Auto Bag ShakerAvailable options:42 Gallons Drum Discharge - Single Drum (3 REQUIRED)230 Gallon Dump BinAvailable spare parts:- Filter Bag (24 Filters)- Plastic Bags (Roll of 90 - 8 mil thickness) - 500mm Clamp (bags, barrels, and bin)

NEDERMAN - DANTHERM NFK3000 8+2 Filter Dust Collection System. Full-Featured with Return Air, Abort Gate, Non-Return Explosion Valve, Spark Detection, and Rotary Air Lock with Dual Relay Transfer Fan., 40,000 CFM approx Capacity set up @ 6.3 to 1 air-to-cloth ratio, (design dependant). Consistsf of (8) filter modules under positive pressure and (2) entry (dust fallout modules), expandable Heavy Duty Baghouse Dust Collector System. Designed for medium to large-sized air flows with large material concentration (dust loading).Features: Variable Speed motor drive. (2) 32" High Speed Abort Gates and (2) 32" Explosion Isolation Flap Valves CARZ - Nederman. 2-Zone Spark Detection for (2) Process Air Lines to Filter and (2) Return Air Lines.- Zone 1 Spark Detection – 2 x extinguishing sets in 28"; duct to be located a minimum of 23’ from detector set in 40"; duct between fan and dust collector- Zone 2 Spark Detection – 2 x 32"; high speed abort gates to be located in minimum of 10’ from zone 2 detector sets in 40"; duct.Specifications: -- Total approx. 7,320 sq. ft.of filter area, total of (400) filter bags. Each module contains (50) filter bags @ 915 sq. ft. filter area per module). -- Consists of (8) Filter module sections with combined explosion and access door in each section, each with 2 HP regenerative fans for cleaning of filter media. -- Unit is ATEX rated. Hopper for collected material to a NRSZ-10 Rotary Air Lock (RAL) discharging into a Dual Relay System dust transfer with T.40-315 Relay Fan – 20 HP -- Equipped with: (1) Ground-mounted 200 HP - 1800 RPM TEFC direct drive motor with Variable Frequency Drive and NEDERMAN 40" Material Handling Fan package with 40" inlet pipe to fan inlet box. -- Electrical: NFKZ Control Panel. Separate control panel with motor starter for main blowers. -- Complete with: Support stand (separate steel support) is not included. .Drain with plug: quick open access doors, (dual purpose Explosion Relief Doors) and inlet flange; -- Includes: Approx. 40" Trunk line pipe filter header to fan inlet, square to round fan discharge adaptor, and approx. 3' high support steel structure. -- Baghouse dimensions are: 94.5" square (2,400 x 2,400 mm) for each module.Hence approx. shell overall length is 945" (78.75'). Depth is 94.5". Height of baghouse shell is approx. 167" (4,250 mm), not including support legs. -- Actual model is NFK3000-8HJ-2BL