woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 89 of 89
1774 Results Found
Sort By 
Recently Added Items
Newman
Call For Price
Newman
Grizzly G9962Z
$7,250
Grizzly G9962Z
Casadei KS 3400
$4,950
Casadei KS 3400
2008 Schelling FH 6-430
$65,000
2008 Schelling FH 6-430
$ 39,000

Yates-American A-20 planer. 4 sided with profile machine, 10" rolls, tongue and groove heads. Includes 10 cylinder Deutz engine, belt drive assembly, extra heads, Newman planer infeed with spiral rolls. As/is-where/is, as removed from service. Price Reduced $39,000. 

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

Call for Price

Yates American B-15 Helical Head Planer S/N 29658

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Planer Head Set Up Stand

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Yates American B24 Planer

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Yates American B-26 Top/Bottom Planer 24” capacity Each head has (10) straight knives and are jointed on the fly 460 volt 3- phase

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 37,710

YATES AMERICAN B-26 Top & Bottom Rough Lumber Planer24" x 4" Opening cap., 3/4" to 4" thickness capacity; 46" minimum unbutted length capacity;Specifications: -- (1) 75 HP DMD motor power hoisted top head, (1) 40 HP DMD motor bottom head, 8" dia. cutting circle at 3,450 RPM. -- 40 HP Hydraulic power unit for variable feed rate from 75 to 400 FPM, 12" dia. Urethane tire top feed rolls, 12" dia. non-powered lower rolls. Equipped with: -- Carbide spiral cutterheads, automatic pressure bar release (hydraulically operated), hydraulic top & bottom headlocks, anti-lap bar device, air tensioned & released chipbreaker. -- Complete with: Built-in top & bottom jointers, dust hoods, electrically interlocked safety guards, and small remote operator's console.

Louis Sicotte
800-374-5009 ext:329
Call

$ 22,050

YATES AMERICAN - B-26: Top & Bottom Rough Lumber Planer24" x 4" Opening cap.; 3/4" - 4" thickness capacity; 46" min. unbutted length capacity.Specifications -- (1) 75 HP DMD Motor power hoisted top head; (1) 40 HP DMD motor bottom head; 8" dia. cutting circle at 3,450 RPM. -- 2 HP Hydraulic power unit; variable feed rate: 75 - 400 FPM; 12" dia. urethane tire top feed rolls; 12" dia. non-powered lower rolls. Equipped with: -- 10-Knife Carbide cutterheads; automatic pressure bar release (hydraulically operated); hydraulic top & bottom headlocks; anti-lap bar device; air tensioned & released chipbreaker.Complete with: -- Built-in top & bottom jointers. -- Dust hoods (not shown on picture). -- Electrically interlocked safety guards. -- Top infeed /outfeed rubber rollers.

Louis Sicotte
800-374-5009 ext:329
Call

$ 30,000

Yates-American Planer Mdl. 415M, S/N: 25264, $30,000

 Pine River, MN
Christensen Forest Products
218-820-8961
Call

$ 9,950

YATES-AMERICAN - B-244: 30" Planer30" x 8" Cap., 7-1/2 HP - 3,600 RPM direct drive motor; 4-knife 4-1/4" dia. cutterhead; 1/8" min. material thickness; 11" min. unbutted stock length; 3-1/4" min. butted stock length. -- 30" x 40" Cast iron table bed; manual raise-and-lower on (2) 1-3" /8 dia. hoist screws; belt drive feed system; variable speed 25 - 70 FPM; (2) 4" dia. powered upper rollers with: Sectional top in feed roll; (2) 4" dia. bed rollers; sectional chipbreaker. Fully restored in 2025 -- 240 VAC, 3 Phase, 3600 RPM; 7-1/2 HP direct drive cutterhead motor; 3/4 HP separate drive train motor. -- 4-Wheel drive: All (4) rollers are powered for stock feed. -- Segmented infeed roll & chip breaker: Both rebuilt with: New springs; spring caps; graphite lubricant. -- (2) New, hardened 52100 steel bearing shafts; heat treated at SW Metal Treating in Fort Worth; precision ground at Fort Worth Centerless grinding. -- Fully repaired & insulated leads on the motor stator. Stator was fully checked at "T-Gray Electric" in Dallas; all tests passed. Results report included. -- Upgraded threaded riser shafts from: 1-1/4" to 1-3/8". -- Improved REEVES Drive motor mount collar. -- Rebuilt drive train motor with: New bearings. -- New TIMKEN cutterhead bearings; new needle bearings where required. -- Dynamically balanced cutterhead and motor rotor assembly. -- New cutterhead knives. -- Rebuilt power transfer shaft housing. -- New transmission frame & speed adjustment linkage. -- Rebuilt speed control knob. -- (2) new drive train chains. -- Everything: Fully stripped, degreased, derusted, primed, painted. -- Custom start button console. -- Table & table rollers: Residual rust pitting that does not affect performance or surface finish. -- Custom dust chute with: 8" hose adapter.

Ed Webb
800-374-5009 ext:377
Call

Call for Price

220v 3 phase 2hp motor Controls work, motor runs and spindle turns Spindle raising mechanism has pin sheared in bevel gear. Includes overarm casting & mobile base.

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 24,800

ZEETECH - 200, ...Universal Hopper Feeder that can be mounted to all Moulders. - Capacity: 3/4" - 9-1/2" width, 0.38" - 5" max. material height, 10" min. length. -- Oil-free air operated drive unit mounted on THOMPSON hardened ways, damped drive travel, positive sensing sequencing actuator. -- Variable speed range from 0 - 120 FPM @ 80 - 120 PSI. -- Includes: All air logic controls (no power required) and air filters; easy to install.

Torry Hiddema
800-374-5009 ext:371
Call

$ 4,750

ZINTEXX 5200 Abrasive Blast Media Belt Cleaner for Wide Belt Sanders; -- Utilizes ground glass to clean belts. -- Traverse variable speed D/C drive motor with adjustable limit switches, maximum stroke 60".Specifications: -- 30 SCFM @ 52 PSI (max.); 850 liters/minute @ 3.45 bar (42 SCFM); 115 V, 1 Ph., 60 Hz, 20 AMP. -- The cleaner will automatically move the nozzle across the belt surface. Speed is adjustable from 0 to 100. -- Digital Counter must be connected to dust collection, 800 CFM minimum. -- Ground glass blasting media available from McMaster Carr.Overall Dimensions: -- 85.5" W x 39" D x 68.5" H; 100 Lbs dry weight.

Scott Grissom
800-374-5009 ext:308
Call

Call for Price

ZUCKERMANN CHALLEGER Copy Lathe w/Sander for asymmetric/irregular shaped parts.Hopper feed, single spindle; approx. 149" (3,800 mm) max. between centers, 8-13/16" (250 mm) max. part dia.; 5 HP cutter head motor at 6,000 RPM, oscillating belt sanding unit, both units work together. -- 'Cup' style Cutter head; 2 HP spindle & pattern rotation motor; mechanical & pneumatic traverse of cutter head and sanding carriage. -- Complete with: Built-in operator push button control panel and overhead dust collector hood.

Tony Cornacchione
800-374-5009 ext:432
Call

Call for Price

ZUCKERMANN CHALLENGER 1700 37-Z SYNCHRO Copy Lathe. Single spindle hopper feed CNC Copy Lathe for shaping & sanding asymmetrical parts. -- Size Capacity: 67" Maximum 67" (1700mm) and 4" (100mm) minimum working length, 9.8" maximum working diameter. -- Drives/Speeds: The cutter head is belt driven by 5.5 HP motor to run at 6,000 RPM, sanding motor 1.5 HP to drive a 5-7/8" wide sanding belt. Work piece rotation CNC controlled for variable rate from 12 - 130 RPM, via 4 HP motor, carriage speed CNC controlled 7- 67 inches per minute, automatic hopper feed as well as automatic unloading . -- Controls: Machine sequencing, cutting and sanding speeds controlled by SIEMENS "Sinumerik 810 T" CNC controller with programmable memory for rapid set up. --Complete with: Various spare parts & 220 or 440 V operation transformer.

Tony Cornacchione
800-374-5009 ext:432
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved