woodworking Equipment For Sale

WEINIG UNIMAT 23EL Feed Through Moulder: 6-Head (B-R-L-T-T-B), working capacity 9-1/16" x 4-3/4". -- Head sequence: Bottom 15 HP, Right 15 HP, Left 15 HP, Top 25 HP, Top 25 HP and Bottom 15 HP motor. -- Spindles: dia. 40 mm with cutterhead speed of 8,000 RPM. WEINIG ATS (Auto-Tool Setting) for left and right spindle. All other settings with mechanical readouts. -- Feed System: 7.5 HP variable feed drive, feed speed 18 - 118 FPM. (4) Powered machine table rollers. -- Includes: Central lubrication at front side of machine and side pressure roller at mounted at infeed table. Infeed table 2 M (6'-6") with manual table lubrication pump. Infeed fence with rollers for addition of hopper feeder.Note: The electronic brake is not working on (1) side and and the feed motor

Raimann Flexirip 6200 Saw System is still under power until the end of January 2025

WEINIG - P-22 Feed Through Moulder5-Head WEING Molder with a working cap. 9-1/16" x 4-3/4".Head Sequence -- Bottom: 10 HP; Right/left:10 HP; top: 15 HP; Bottom: 10 HP motor. -- Spindle dia. 1-1/2" with: Cutterhead speed of 6,000 RPM; mechanical spindle brakes all spindles. -- Mechanical digital readouts on all spindles; Digiset readouts on left & top spindles; mechanical readouts on chipbreaker & pressure elements of top spindles.Feed -- Controlled feed speed from: 16 - 78 FPM; 5-1/2 HP feed drive. -- Infeed straightening table: 2 M (6-1/2"); fences, side holdover roller mounted to infeed table; manual Waxilit pump.Features: Reduced distance feed roller; protection against backlash when splitting; central location of lubrication points; sound/safety enclosure. -- Comes with: Large assortments of cutterheads, 9" - 2"; approx. (30); includes lots of different knives for each of the heads.

WEINIG - UNIMAT: 10005-Head (B-R-L-T-B), 9-1/16" x 4-3/4" cap. -- Head sequence: Bottom 10 HP; right 15 HP; left 15 HP; top 25 HP; 20 HP motor. -- WEINIG "Memory Re-Dial" System with: Storage of (100) separate profiles; electronic LED readouts for all spindles. -- Spindle dia. 1-13/16" with Cutterhead speeds: Spindle #1 at 6,000 RPM; spindles #2 - #5 at 7,000 RPM with high precision bearings & mechanical spindle brakes; adjustment of vertical spindles 3-1/8" axially. -- Electronic LED readouts for: Chip breaker & pressure elements for top spindles. -- Cutting circles: 8-7/8" On spindles #2 - #5; vertical spindles with adjustable table plates to cutting circles; hardened infeed bed plates before-and-after 1st bottom head. -- Motorized feed beam adjustment; variable feed speed from: 20 - 118 FPM; 10 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- (1) Powered table roller in bed at outfeed. -- Infeed straightening table 2 M (6-1/2') with adjustable fence; adjustable table at outfeed. -- Equipped with: Central location of lubrication points; side pressure roller at infeed; manual Waxilit pump; (2) lights inside sound enclosure. -- Includes Set-Up Stand.NOTE: Machine is in good running condition, but electric brakes are not functional; does not affect running or performance.

WEINIG - HYDROMAT H 1000: Moulder (Feed Through)5-Head (B-R-L-T-B); working cap.: 9-1/16" x 6-5/16" capacity. -- WEINIG - H 1000. Spindle sequence: Bottom 15 HP; right 10 HP; left 10 HP; top 20 HP; bottom 15 HP motor. -- Spindles: Dia. of 1-13/16" with cutterhead; speeds of 1st head: 6,000 RPM; 2,3,4,5, at 8,000 RPMs; mechanical digital readouts on all spindle adjustments. Pneumatic pressure elements on left & top head chip-breakers. -- Feed drive: Variable feed speed from 20 - 120 FPM; all feed wheels driven and with pneumatic pressure. -- Central lubrication: Automatic table lubrication pump; machine prepped for lateral feeder; sound enclosure; safety hood with: (1) Inside lights.

WEINIG - U 1000: Feed Through Moulder6-Head (B-R-L-T-T-B); working cap. of 9-1/16" x 4-3/4".Specifications -- Head sequence: Bottom 10 HP; right 15 HP; left 15 HP; top 25 HP; top 20HP; bottom 20 HP motor. - All spindle motors with mechanical brakes. -- WEINIG Memory Redial system allows for: Storage of over (200) separate profiles; electronic LED readouts for all spindles, chipbreakers; pressure elements. -- Spindle dia. of 1-13/16"; spindle #1 at 6,000 RPM; spindles #2 - #5 at 8,000 RPM with high precision bearings; adjustment of vertical spindles: 3-1/8" Axially. Feed -- Motorized feed beam adjustment with independent adjustment of top head; cutting circles 8-7/8" on spindles #2 - #5. -- Variable feed speed from: 20 - 118 FPM; 10 HP inverter controlled Cardan feed drive; overhead feed wheels with pneumatic pressure. -- Vertical spindles with: Adjustable table plates to cutting circles; hardened infeed bed plates before & after 1st bottom head. -- (1) Powered table rollers in bed at outfeed. -- Infeed straightening table 2 M (6-1/2') with: Adjustable fence and adjustable table at outfeed; chromed tables and fences. Central location of lubrication points; electromagnetic interlocking of safety hood; manual WAXILIT pump. -- Complete with: Axial adjustment of feed roller opposite left spindle & (1) light inside sound enclosure; all setup tools, manuals and spacers.

270 Ton WEMHONER - Hydraulic Press: Model KT-M-15/28-240 - 110"; Left-to-Right x 59"; Front-to-Back Down-Acting Clearance between frame: 126"; L to R x 37"; F to B. -- Nominal bed: 110"; x 59";. -- 4-Clamp Cylinders are single-acting: Approx. 8"; bore; 6"; dia. rods; approx. 10"; max. stroke. -- (1) Center traversing cylinder: Approx. 3" bore with 1-3/4" diameter rod (approx. 16 max. stroke). -- Max. daylight: Approx. 16";. -- Approx. 28-1/2"; Operator height. -- Guided with rollers at each corner and (2) gear & rack guides. -- Slide & bed: 4" Thick; self-contained Hydraulic System: -- (2) Reservoirs: Approx. (14) gallons each. -- 4 kW Motor: Approx. 5 HP; 1,800 RPM; 440 Volts; 9.15 Amps. -- Pump: Type "R60A; max. 350 Bar, etc. -- Speeds: Approx. 99 IPM fast down; 2.0 IPM Pressing adj; 99 IPM fast up. -- NO Electrical Controls. -- Overall Dimensions: Approx. 146"; x 65"; x 96"; high. -- Approx. 30,000 Lbs.

Wemhoner Variopress

West Salem model 2420GR1-H wood grinder/hog 480 v Bottom discharge No screen - machine has breaking bars Disconnected and ready to ship

WESTERN PNEUMATICS HEAVY DUTY FINGER JOINTER WITH THE FOLLOWING EQUIPMENT & FEATURES: -- Right & Left Shaper Section: Thickness Capacity: 3/4" - 2" maximum; Width Capacity: 1-1/2" - 8" maximum; Length Capacity: 5" min. - 36" maximum; -- (2) Scoring Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Trim Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Shaper Spindles are hydraulically powered; direct driven @ 3,600 RPM by -- (1) 60 HP Hydraulic Power Unit with (1) cartridge unit per spindle. Hydraulic conversion was performed during the first year of operation. -- Western's 2-1/2" wide feed chain with lugs on 9" centers; 15 HP variable speed drive with up to 120-lug per min feed speeds; with angle transfer conveyor, air bag pressure head with quick-change feature & brush hold-downs -- APQUIP Extrusion Type Glue Applicator complete with mixing system. Currently arranged for 3/8 finger joints including (4) 3/8" glue combs -- Manual Corner Transfer to the assembly section. (allows for inspection and rejection of blocks for poor joint quality, missing proper glue spread, etc. prior to going into assembled boards) -- 12' Pre-Assembly Infeed Conveyor with feed speed ramp up/down; with side alignment rolls and dual top and bottom pre-assembly rolls -- Flying Cutoff Saw operating from below -- Assembly Press: 20' board capacity with hydraulically powered press -- Automatic Cycling Assembly Section: Feed speed varies automatically from 50 to 200 FPM, depending on incoming block lengths. Boards advance through the Cutoff Saw to a moveable limit switch where they are cut to length with a bottom-mounted 7-1/2 HP Flying Cutoff Saw arranged for continuous non-stop assembly. The cut to length board drops down into the squeeze chamber while the next board feeds out and above the preceding board where it is cut to length. Pressed lengths are pushed out onto material outfeed arms by the following board

WESTERN PNEUMATICS - FJW2VS24: Heavy-Duty Production Finger Jointer Right & Left Shaper section: Cap.: 5/8" - 2" max. thickness; 1-1/2" - 8" max. width; 5" min. - 36" max. length.Equipped for right & left side -- (2) Scoring saws: 7-1/2 HP - 3,600 RPM motors. -- (2) Trim saws; 7-1/2 HP - 3,600 RPM motors. -- (2) Shaper motors: 20 HP - Direct drive 3,600 RPM motors. -- 6" Wide WESTERN feed chain; angle transfer conveyor; 15 HP variable speed drive with speeds up to (120) lugs per minute. -- Air Bag Pressure Head with: Quick-change feature; brush holddowns. -- APQUIP extrusion type glue applicator with: Meter mixing system. -- Transfer to the Assembly Press: Via powered manual Corner Transfer. -- 17' Extra length Assembly Infeed Conveyor with: Electronic ramp up/down infeed package; powered side alignment rolls; top & bottom preassembly rolls. -- Assembly Press: 16' Finished board length; hydraulic squeeze board press & board ejection with: Rapid stop-and-chop 7-1/2 HP Heavy-Duty cutoff saw; with automatic cycling. -- Feed speed varies automatically depending on block and cutoff lengths: 50 - 200 FPM.Pieces advance through the Cutoff Saw to a movable limit switch and cut to length; arranged for continuous assembly; the cut to length piece drops down into a final squeeze chamber, while the next piece is cut to length; finished lengths are pushed out hydraulically by the next piece onto material outfeed arms.Includes: -- Set of cutterheads and knives.NOTES: -- Machine for factory rebuilt in 2009. -- Machine easily runs (120) lugs per minute and 200 FPM at the Press. -- Equipment maintained to factory standards since new. -- Parts replacement (feed chain, sprocket, fences and more) in 2018 for a total of ...$ 28,500. -- Taken out of service: January 2025.Riggers: Required for loading.Some technical information needs to be confirmed by Seller.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i61 WHIRLWIND 1000 L Upcut Saw Specifications: 2-3/16" x 8-1/4" Cap., 14" blade cap., 3,450 RPM, left-hand unit feeding from right-to-left, 5 HP BALDOR motor. Complete with: (5 - 90) Cycles/Min; magnetic starter with low voltage controls, air filter, regulator, coalescing filter, and 4" dust chute. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Whirlwind Undercut Saw with Tiger Stop Fence

Whitney 105 Planer 24" Planer Used daily in current shop.

Specifications -- 30" x 8" Cap., 20 HP - 3,600 RPM, 30/40/50/60 FPM; belted feed drive; Helical Carbide cutterhead; 14" min. stock length. Complete with: Sectional chipbreaker, corrugated infeed roll.

Whitney 105 Planer 24" Planer Used daily in current shop.

Williams 125 CJS1 Hammermill

Williams 125 HP Hammermill 230/460 3-phase

Williams and Hussey 2007 W7-S model 206 planer/molder good condition Ser# 00452 Weight 250 ish Max thick 7”, Max width 7” Multi pass Baldor motor Powered infeed and out feed New std knives available at W/H for app 100/set Custom knives available from W/H