Woodworking Equipment For Sale
1774 Results Found
Call for Price
2002 Weinig U23E 5-Head Moulder 2021 Doucet MFE-150-12 Infeed System This system is still in production and ready to be loaded out.
Call for Price
Weinig Unit 318 Moulder 9" Machine 6-Head Low hours! Also available: Weinig R960 Grinder and tool room
WEINIGUnimat500ClassicFeed Through Moulder; --5-Heads, working capacity 230 x 120 mm(9-1/16" x 4-3/4"). -- Head Sequence: Bottom4 kW (5.5HP), right& left4 kW (5.5 HP),top5.5 kW(7.5 HP), top 5.5 kW (7.5 HP), and bottom4 kW (5.5 HP) motor. -- Spindles: Dia.40 mm (1-9/16")with cutter head speed of 6,000 RPM;digital readouts on spindle adjustments in combination with the WEINIG MEMORY SYSTEM. Motorized height & width adjustment of spindles. Tool diameter 1st spindle min/max 125-145 mm (4-15/16" - 5-11/16"), other heads 112-200 mm (4-7/16" - 7-7/8"). -- WEINIG Powerlocktool holding system on top heads. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. --Variable feed speed5 to 30 m/Min (16-98 FPM), driven by 5 kW (7.5 HP) motor. Overhead feed wheels with pneumatic pressure. Cardan drive. -- MachineTables: Made of hardened steel. Infeed straightening table is 2,000mm (6.5') with adjustable fence & adjustable outfeed table; (1)side pressure roller mounted to infeed table. -- Complete with: WEINIGMEMORY SYSTEM-reduces set-up time by storing spindle positions and tool radii.Central lubrication. Full sound/safety enclosure with illumination inside. Manual lubrication pump. Automatic star delta starters. CE Compliance. (2) Emergency stop buttons. --Actual model is WEINIG Unimat500ClassicFeed Through Moulder; 6-Heads --Price mentioned is landed US port. ...we just added $5,000 to partially cover the extreme increase in Ocean freight. (...04/03/2022 JS). --Note:EX-FACTORY’s Logistic Department is experienced and setup to provide “Full Service Logistic"; from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door), US or Canadian Customs, Duty and domestic shipping to your Plant Door.
$ 169,900
WEINIG UNIMAT 818 S Feed Through Moulder 6-Head (B-R-L-T-T-B), working dimension 12-3/16" x 6- 5/16".Capacity: -- Working width 3/4" - 12-3/16" -- Working thickness 5/16" - 6-5/16" -- feed speed-variable with 10 HP inverter 20 - 200 FPM Head sequence: -- Bottom 25 HP, right 15 HP, left 15 HP, top 30 HP, top 30 HP, and bottom 30 HP motor; all motors with electronic spindle brakes. -- Spindle dia. 1-13/16" with cutter head speed of 6,000 RPM; -- outboard bearings on spindles #1, #4, #5 & #6. Electronic LED digital readouts for all spindlesJointer: -- Head # 1 Bottom straight jointer manual, remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 -1/16"; With outboard bearing 4 3/4"; For tool circle 6 1/16"- 7-1/16" -- Head # 2 Right spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 3 Left spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 4 Top spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 1/16"; With outboard bearing 4-3/4"; For tool circle 6-1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- Head # 5 Bottom spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12-1/16"; With outboard bearing 4-3/4"; For tool circle 6 1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- (4) Jointer cassettes for profile jointer, length 6" -- (2) Jointer cassettes for profile jointer, length 9" -- (1) Set of jointing stoneReadouts: -- Digiset (double mechanical readouts) for left and top radial adjustments. One readout is for the tool size and the other for the finished wood dimension (with Imperial inch adjustment -- Mechanical readouts on all other axes. Side pressure roller: -- (10) Driven feed roller shaft from above -- (5) Driven steel rollers in the machine table -- Axial setting range of the feed rollers opposite left spindle, 1-3/8" -- Extension of the feed shaft opposite the left spindle to 8 -1/4 in. -- Axial setting range of vertical spindle 3-1/8 in. Axial setting range of horizontal spindle 1 -3/4 in. (1st bottom 3/8 in.) -- All spindles diameter 1 -13/16" -- (6) Additional set of spacing collars, clamping length 6-11/16", diameter 1-13/16" -- Pressure shoe in front of 1st left spindle receding from tool, incl. lateral roller pressure, pneumatic -- Receding chip breaker in front of 1st top spindle, pneumatic. -- Pressure shoe in front of and guide after top spindle with mechanical digital displays
Call for Price
Weinig Unimat Gold - 6-Head Machine Weinig Rondamat R960 Grinder Includes: Tooling and approx (200) profiles from tool room
$ 3,900
WEINIG 051 Single End Tenoner W Motorized Feed TableSpecifications: -- 2-Head Tenoner for cabinet and window parts. -- (1) Trim saw & (1) Stacked cope head, both direct motor drive, sliding table with fence line and (2) pneumatic hold downs, control panel and large asssortment of high quality tooling.Actual model is WEINIG 051
$ 14,200
Weinig Quattromat Q23V 4-Head Through Feed MoulderHead Configuration : (B-R-L-T) Profile or "S4S" Moulder,Specifications: -- 9-1/16" x 4-3/4" cap. -- Spindle sequence: Bottom 5.5 HP, right / left heads 7.5 HP , top 5.5 HP motor. -- Spindles 1-1/2" dia. at 6,000 RPM, mechanical digital readouts for setting accuracy. -- Feed speed of 26 FPM, 1 HP feed drive, direct drive.Equipped with & Features -- 6'- 6" Infeed straightening table with adjustable fence, table inserts for right and left heads. -- Sound insulated safety hood.Technical specifications: -- Machine dimensions 120" x 48" x 62", -- Electrical requirement (95 Amps) at 230 volts, 60cy. 3ph., -- Dust collection 4,500 CFM and Shipping weight 3,500 Lbs.
$ 33,500
Call for Price
Manufacturers Specifications tool diameter: 100 - 300 mm tool width: max. approx. 230 mm motor / grinding disc drive: approx. 1,1 kW free angle, adjustable 15 - 35° drive for coolant pump: approx. 0,065 kW tank capacity: approx. 90 l
Call for Price
Call for Price
Call for Price
$ 26,900
WEINIG PROFIMAT 22N Feed Through Moulder/Grinder Package Specifications: -- 5-Head (B-R-L-T-B), working width 8-5/8" x 4-3/4". -- Head sequence: Bottom 10 HP, right/ left 10 HP, top 15 HP, and bottom 10 HP motor. -- Spindle dia. of 1-1/2" with cutterhead speed of 6,000 RPM. -- Features: Mechanical digital readouts on all spindles; Digital readouts on left & top spindle. -- Feed speed variable from 18 - 78 FPM, 3 HP feed drive. (1) Powered table roller in machine bed at out feed. -- Complete with: Infeed straightening table 2 M (6'-6") and side pressure roller mounted to infeed table. -- Manual table lubrication pump, manuals sound & safety enclosure and dust collection manifold . -- Includes seventeen heads, extra feed wheels and neoprene feed wheels, as shown in Photos. -- Seller is also including the Owner's Manual.WEINIG RONDAMAT 934 Profile Grinder: -- 9" Arbor length, 11-1/2" max. tool dia., 1.5 HP motor, tilting head assembly for back relief grinding, clearance angle on peripheral of tools 10° - 30° and to each side 0° - 20°. -- Variable feed speed 1,800 - 3,000 rpm via a vari-speed gearbox, on-board wheel dressing, 9" max. wheel dia.; 0.16 HP coolant pump with built-in coolant tank. -- Includes: Operators manual, clamping nut, and pull-off bolt, 1-1/2" arbor, and an extra set of grinding wheels and toolingWEINIG OCMS measuring stand (not shown): -- With a working width of 300 mm. -- The allowable tool dimension of 3" to 11-3/4" head diameter. The measuring stand allows for electronic measuring and indicating of cutter head dimensions with electronic digital readouts; visually establishing the tool measurement, no setting errors, and no expensive CNC control. -- Magnifier screen viewer with 20:1 magnification; the cutterhead is placed in Powerlock tool post, all the operator does is view the scope and move the measuring carriage via precision dialing left to right. -- Measured values (radial) and (axial), tool dimensions both minimum and maximum are displayed. -- Includes: 1-1/2" arbor.These machines came out of a Mom and Pop shop and have been very well maintained. Both machines are in great working condition, and have no running issues.
$ 11,800
WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.
$ 16,900
WEINIG Profimat 23 E 5-Head Moulder5-Head (B-R-L-T-B) with working dimensions 9-1/16" x 4-3/4". -- Spindle sequence: Bottom 10 HP, right/left 10 HP, top 15 HP, and bottom 10 HP motor. -- All motors with mechanical spindle brakes. -- Spindle dia. 1-1/2" with cutterhead speed of 6,000 RPM. -- Equipped with Mechanical digital readouts for all spindles, and Digiset readouts for left and top spindles. -- Feed motor 4 HP with speed of 20 - 76 FPM. -- Table inserts for right & left spindles for the running of narrow stock; outfeed table roller. -- Infeed table 2 M (6-1/2') -- Manual Waxilit pump, central lubrication from front of the machine. -- Includes BEN-200 Mahros Horizontal Roller Feeder for moulder infeed, as shown in photos.Seller is also including Heads and Knives with this machine.
$ 31,900
WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 17 - 78 FPM, powered by a 4 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 460 Voltage / 3 Phase Power using 79 Full Load Amps. -- Includes - All heads, rollers, setup tools shown are included, Owner's Manual, and 4-hose Dust manifold.This machine runs perfectly, is in Good Condition- with some dents to the outer sound enclosure. Overall Dimensions: 132"; x 64"; x 64";Approx. 8,000LBSRemoval is responsibility of buyer. Seller can build a crate, and put it on a truck for an additional $1,000.00
$ 17,500
WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 20 - 78 FPM, powered by a 5 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 230 Voltage / 3 Phase Power using 146 Full Load Amps. -- Includes - All heads, rollers, and setup tools shown in photos are included.Overall Dimensions: 132";L x 78";W x 68";HApprox. 8,000LBS
Call for Price
Weinig Profimat 23E 5 head moulder Bottom Right Left Top Bottom Complete with Weinig Rondamat 950 profile grinder. 460 volt 3-phase Clean machines from a low volume specialty shop.
$ 64,500
WEINIG Powermat 1000 7-Head Feed Trough Moulder(B-R-L-T-T- B-U); working cap. 9-1/16" x 4-3/4". Head sequence: -- Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 40 HP , bottom 30 HP and universal 15 HP motor. All motors with electronic brakes. WEINIG Touch-Screen "Power Com" -- PowerCom Plus software system features: Profile drawing storage, profile dimensions, tool changes and production optimization. -- Electronic LED readouts for all tool holder settings, including chip breakers & pressure elements. -- Spindle #1: 1-13/16" w/Cutterhead speed of 8,000 RPM; -- PowerLock tool holders on #2 - #5 with 12,000 RPM and universal tool holder variable from 4,000 to 12,000 RPM and with high precision bearings; adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning; radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment top head; top head with independent adjustment of chip breaker & pressure element. -- Universal spindle with 270° of movement. -- Variable feed speed from 20 - 118 FPM, 7.5 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- Chromed tables and fences, (2) powered table rollers in bed and (1) between left and top spindles and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2').Equipped with: Pedestal for machine controls separate from the electrical cabinet, central location of lubrication points. -- Electromagnetic interlocking of safety hood, automatic table lubrication pump and (2) lights inside reinforced sound enclosure; phone modem..
Call for Price
Weinig Powermat 1000 Moulder - 8,000 rpm machine out of production 2/2024. Converted from 12,000 RPM. - Working cap.: 9-1/16” x 4-3/4” - Motors: B-15 HP, R-15 HP, L-15 HP, T-30 HP, T- 40 HP and B-30 HP. - Spindles/Tool Holders: Spindle 1-13/16" at 8,000 RPM; HSK tool holders 2-6 8,000 RPM. Motorized tool positioning for tools 2-6 Radial and Axial. - CNC: WEINIG Power Com "Touch Screen” PLUS software with tool data storage 300 profiles, profile data and tool monitoring. Led readouts to all spindles/tool holders; including chipbreaker’s and holddown’s. Modem for external diagnostics. - Feed: Variable inverter drive speed with 7.5 HP motor with speeds from 18-118 FPM. - Infeed/Tables: 2M (6'-6”) infeed table with side pressure roller, AUTO table lubrication and chromed tables and fences.